Jump to content
Redhawk

Revolver Picture Thread

Recommended Posts

I have the same limited Dan Wesson one, they are just beautiful :)

 

brrrother.jpg

 

People here seem to have success in modifying these co2 revolvers to a reasonable power and adding hops/barrells etc, are there any tips you can share with the rest of us on how to work such magic?

Edited by Forti

Share this post


Link to post
Share on other sites

Creation CNC alu m29 kit Tanaka m629 performance center based (new edition)

 

swm29.jpg

 

Can anyone tell me how to adjust the hopup or does it have fixed hop? Now bb's even with .30 fly everywhere...

 

That's a real beauty!! Dirt Harry style! I wish I can help you with the hop-up.

 

George

Share this post


Link to post
Share on other sites

I have the same limited Dan Wesson one, they are just beautiful :)

People here seem to have success in modifying these co2 revolvers to a reasonable power and adding hops/barrells etc, are there any tips you can share with the rest of us on how to work such magic?

 

never tried it on one of these but ,just bending the hammer spring so theres less pressure behind it works well with nbb's. Also makes for easier single action use. If theres not enough drop then theres the flow restrictor method by gluing a peice of tubing in the gas outlet behind the shell. As for the hop what I've done before on un-hopped barrels is file out a hop slot, trim the burrs with a scaple. Then add an oring or piece of oring, all depends on how the barrel fits in on how you do it .Its very much a trial and error process so start with a small slot and work up.

Share this post


Link to post
Share on other sites

'Nam Aircrew stylie- Smith M36 (ala Marushin) with real steel speedloader and 15x shells.

Perfect for hiding in my ERDL pockets when I don't want to ruin the look of me STABO with a holster....

IMAG0128.jpg

Also my new Manix II- which am scary sharp :thumbsup:

IMAG0129.jpg

IMAG0132.jpg

Share this post


Link to post
Share on other sites

Just got this bad boy (6"). Can anyone tell me how to disassemble it? I need to lower the fps and try to jury rig in a hopup.

 

*snip*

 

I've modded the wingun CO2 revolvers to have adjustable hop. If i get my hands on one I'll post a pic or two :)

 

Regards

 

Dave

Edited by Kalashnikov_kid

Share this post


Link to post
Share on other sites

Sexy! How does it perform?

 

Great now I've put some extra torsion on the leaf spring ,maximised the travel of the valve ,replaced the valve springs for some softer ones ,drilled out the gas outlet ,and replaced the oring on the valve to the outlet with a larger one. Started off 250fps by most suppliers stats ,and seemed about as much .Over hopped like nobodys buisness, and increddibly inaccurate on 0.2's .Now with the 300fps+ (not 100% sure as I've no chrono but in comparison to guns I know the fps of) it seems to have reigned in those issues with the 0.2's .Need some 0.25's I think should be just right with the hop. Plus the grips are so much more comfortable.

Edited by heroshark

Share this post


Link to post
Share on other sites

Strange grips, bit to Smith & Wesson for Colt, are they Thai by any chance? IS so what is the quality like look at some for my Smolt.

Share this post


Link to post
Share on other sites

Strange grips, bit to Smith & Wesson for Colt, are they Thai by any chance? IS so what is the quality like look at some for my Smolt.

 

yes bud .Qualitys ok ,fit was bad. Took lots or dremmeling and still not 100%. but fo £25 you cant complain.

Share this post


Link to post
Share on other sites

Bell M10 with "the works".

IMG_1374.jpg

edit:

And I'm not just talking about the tape and finish. Had to replace/reinforce a good number of parts inside just to make it near reliable.

Edited by renegadecow

Share this post


Link to post
Share on other sites

Tanaka M66 4"- rosewood grips, Price Western leather holster....Pretend it's a nickel plated M19 and it's perfecto for a bit o' tunnel ratting with the original 1960s ARVN map of the Da Nang area it's sat on :)

IMAG0354.jpg

IMAG0355.jpg

IMAG0356.jpg

Share this post


Link to post
Share on other sites

Was messing around with my WinGun, converted it to 8mm using modified real-steel 357 Magnum cases and an old bit of 8mm barrel from a M1 Garand.

 

Was staring at it just now, and i was looking at the scope from my Rossi Puma 44 mag and got to thinkin'.. thats a long-eye releif scope.. and i have pistol rings somewhere..

 

 

IMG_1524.jpg

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.