mOrfar Posted August 4, 2009 Report Share Posted August 4, 2009 maybe some teflon tape could work Link to post Share on other sites
-Drake- Posted August 4, 2009 Report Share Posted August 4, 2009 Lastest project build so far. Â Â Missing one of my scope turrets and have no idea where to find a replacement =/ Link to post Share on other sites
Kiki-Jiki Posted August 4, 2009 Report Share Posted August 4, 2009 B4 she gos under the gun.  What do you guys use to shimmy up a collapsible stock [between the tube and the stock], I've tried black duck tape, electrical tape even both but nothing that last long??? Much Kudos to any one that can help.  http://img.photobucket.com/albums/v205/new...05/DSCN0537.jpg  http://img.photobucket.com/albums/v205/new...05/DSCN0540.jpg  Thanks - Cody  What's wrong with electrical tape? I used a couple little layers of e-tape on my old gun between the buffer tube and my CTR and it worked just fine. If you make it long enough (like almost the entire lenght of the buffer tube) the stock never comes off of it, so you don't run the risk of pulling the stock off of the tape then pushing it back on which can cause the tape to rip if the stock hits it right. If you get what I'm saying...maybe that wasn't very clear lol.  By the way, awesome gun. Not a huge fan of the paint on the stock and suppressor, but otherwise absolutely gorgeous. Link to post Share on other sites
wwjkc Posted August 4, 2009 Report Share Posted August 4, 2009 my WA finally almost done: Link to post Share on other sites
Mangledduk Posted August 4, 2009 Report Share Posted August 4, 2009 (edited) My ICS M4  In action  Edited August 4, 2009 by Mangledduk Link to post Share on other sites
[BS]_MARS Posted August 5, 2009 Report Share Posted August 5, 2009 Fiddle - It is a real M951 with FM63, just scored it for $170 NIP shipped on Ebay. Kraut - Yes, that's obvious, but, when you get into the acm market, no such thing exist, the stock and tube on my sbr is Dboy and they dont even match up out of the package and there's hella wobble. just inquiring if any one had any quick fixes for such problem.    Tape doesn't last? I cant imagine good 100mph duct tape wouldn't work well. That's what I'm using on my 416. Also, why the velcro pad on the stock? Link to post Share on other sites
sigmaboy Posted August 6, 2009 Report Share Posted August 6, 2009 Why the ACOG for CQB? Â its not for CQB, i just prefer a shorter weapon. the gearbox is shooting upwards up 420-430fps, and im getting around 220ft range, so it definitely does its job in the woods. so the ACOG is nice for checking the path up ahead and getting a closer look at the "dark spot" in the bush, and a boost in accuracy. Â Link to post Share on other sites
Agent Hunk Posted August 6, 2009 Report Share Posted August 6, 2009 (edited) Tape doesn't last? I cant imagine good 100mph duct tape wouldn't work well. That's what I'm using on my 416. Also, why the velcro pad on the stock? Â 1 piece of electric tape solves the wobble on my CA416 stock. Â And unless you collapse and extend the stock very constantly I don't see how it wouldn't last long. Â Edited August 6, 2009 by Agent Hunk Link to post Share on other sites
J-Rock_14 Posted August 6, 2009 Report Share Posted August 6, 2009 I just use a full stock. I never liked LE stocks anyways, they tend to wobble more often than full stocks do. Link to post Share on other sites
rws591 Posted August 6, 2009 Report Share Posted August 6, 2009 1 piece of electric tape solves the wobble on my CA416 stock. Â How do you like your CA 416? Do you know if PTS PMAGs will fit? Link to post Share on other sites
[BS]_MARS Posted August 6, 2009 Report Share Posted August 6, 2009 its not for CQB, i just prefer a shorter weapon. the gearbox is shooting upwards up 420-430fps, and im getting around 220ft range, so it definitely does its job in the woods. so the ACOG is nice for checking the path up ahead and getting a closer look at the "dark spot" in the bush, and a boost in accuracy. Â Â Oh, you said you were getting it ready for a CQB game. I agree with your use of the ACOG though, that's what I usually do with mine. Link to post Share on other sites
masakarijoe Posted August 7, 2009 Report Share Posted August 7, 2009 the LR300 was better. -Joe Link to post Share on other sites
uscmCorps Posted August 7, 2009 Report Share Posted August 7, 2009 http://i2.photobucket.com/albums/y25/Jason...ie/DSC03075.jpg I like how the center of the bolt actually looks recessed in the picture. Is it the lighting? Link to post Share on other sites
Billy Bob the Sniper Posted August 7, 2009 Report Share Posted August 7, 2009 Its probably just the lighting, I know most fake bolts have alittle dip in them but if you look at the right way they look like its the correct amount. Link to post Share on other sites
spetsnazdave87 Posted August 7, 2009 Report Share Posted August 7, 2009 (edited) My weird, bastardised M4/LR300/XM177 hybrid...     And lastly a truly rubbish picture of it fitted with firepig.   Still to add is a dessie paintjob and a reflex holosight. Currently referring to it as my 'Car-150' as not sure what else to call it  Dave Edited August 7, 2009 by spetsnazdave87 Link to post Share on other sites
Agent Hunk Posted August 7, 2009 Report Share Posted August 7, 2009 How do you like your CA 416? Do you know if PTS PMAGs will fit? Â I like it, the blow back is sorta tacky but nice. Â No idea on PMAGs. Â I like how the center of the bolt actually looks recessed in the picture. Is it the lighting? Â Was not 100% on what you were asking so hopefully these pictures explain it. Â Â Locked back: Link to post Share on other sites
Billy Bob the Sniper Posted August 7, 2009 Report Share Posted August 7, 2009 Real AR bcg's have that 'dimple'.... http://dynamicarmament.com/images/AR15MILS.../BOLT%20CMT.jpg  The lighting your first picture looked like it was 1:1 with the real AR's(or atleast close). Airsoft AR fake bolts have the small depression, but its limited due to the gearbox inside.   Hows the CA416? any wobble between the receiver? Link to post Share on other sites
Nee Posted August 8, 2009 Report Share Posted August 8, 2009  A&K LR300 with G&G Stock   G&P Body G&G Light G&P Reddot G&P Flipup sight KA Stock Action Green laser KA Quickmount for reddot and the light Mixed parts like grip, mag catch and so on from CA Link to post Share on other sites
luvs2shoot Posted August 8, 2009 Report Share Posted August 8, 2009 Nee  Excellent pictures man! I have never seen a sprayed/ worn Lr300 before - very tastefully done.  -Shin Link to post Share on other sites
uscmCorps Posted August 8, 2009 Report Share Posted August 8, 2009 Real AR bcg's have that 'dimple'.... http://dynamicarmament.com/images/AR15MILS.../BOLT%20CMT.jpg  The lighting your first picture looked like it was 1:1 with the real AR's(or atleast close). Airsoft AR fake bolts have the small depression, but its limited due to the gearbox inside. That's why I asked. I'm so used to seeing that dimple being shallow on AEGs, but the CA416's seemed much more pronounced. Link to post Share on other sites
hayabusa46 Posted August 8, 2009 Report Share Posted August 8, 2009 Nee very nice LR300 u did it like in STALKER game  Very acurate and nice. Link to post Share on other sites
Nee Posted August 8, 2009 Report Share Posted August 8, 2009 Thanks =) i havent played STALKER but i take your word for it! =) Link to post Share on other sites
killahaas Posted August 8, 2009 Report Share Posted August 8, 2009 (edited) systema PTW CQB-R Â Â Â Edited August 8, 2009 by killahaas Link to post Share on other sites
Jarsgi Posted August 8, 2009 Report Share Posted August 8, 2009 (edited) Classic Army m15a4 with Crane-stock + KA Multi Reticle sight. Â Im thinking of fitting a RIS and shorter barrel on it. Any more ideas to make it more unique? Edited August 8, 2009 by Jarsgi Link to post Share on other sites
xEnterSandmanx Posted August 8, 2009 Report Share Posted August 8, 2009 Nice PTW Killahaas, though I would change the 416 grip to a standard M4 one. Link to post Share on other sites
Recommended Posts