Hispeed1 Posted January 5, 2010 Report Share Posted January 5, 2010 (edited) Hmm, the M733 handguards are coming in as well, and I got an extra M4 stock that's black... Maybe...I should have the furniture to switch from tan to black XD. I'm not into the 2-tone thing as well, but that tan and black doesn't look too bad. One suggestion, I'd run that light and mount on the right side of the barrel (i see your sling attachment to the left). It'd look cleaner, imho. Nice project. Edited January 5, 2010 by Hispeed1 Link to post Share on other sites
BFOUR Posted January 5, 2010 Report Share Posted January 5, 2010 I'm not into the 2-tone thing as well, but that tan and black doesn't look too bad. One suggestion, I'd run that light and mount either on the left or right side of the barrel. It'd look cleaner, imho. Nice project. I agree witht he light. I always prefer my accesories on the left. But since you were going for the BHD look it works. Link to post Share on other sites
aznriptide859 Posted January 5, 2010 Report Share Posted January 5, 2010 (edited) Hmm, so consensus is to go all black lol? XD Did an interesting photo shoot...I cal it "Past and Present" Who needs 3 guns when you can use 2 as a stand? Edited January 5, 2010 by aznriptide859 Link to post Share on other sites
ndfirespider Posted January 5, 2010 Report Share Posted January 5, 2010 Great photos Azn. It's probablly a good thing you got that receiver instead of me. I was going to butcher the hell out of it trying to add a 9mm shell deflector. Link to post Share on other sites
Luis21 Posted January 5, 2010 Report Share Posted January 5, 2010 Man, I am loving those two ARs big time! -Luis Link to post Share on other sites
Hispeed1 Posted January 6, 2010 Report Share Posted January 6, 2010 @ Azn: your tan & black BHD M4 isn't bad, BUT since you already have that new one with FDE, you might as well go all black. It'd look more authentic imho. Link to post Share on other sites
Luis21 Posted January 6, 2010 Report Share Posted January 6, 2010 @ Azn: your tan & black BHD M4 isn't bad, BUT since you already have that new one with FDE, you might as well go all black. It'd look more authentic imho. But it wasn't black in the movie!!!! Anyways, for those of you who have installed DD RIS IIs or Lite Rails: Can you tighten the barrle nut using a regular AR stock tube castle nut wrench? Thanks, -Luis Link to post Share on other sites
Andrew March Posted January 7, 2010 Report Share Posted January 7, 2010 Yep, you certainly can Luis. Link to post Share on other sites
Operator12 Posted January 7, 2010 Report Share Posted January 7, 2010 AZN, are you bringing both of those with you to wonderful NC? If so I cant wait to see them Link to post Share on other sites
[NL]Infinity Posted January 7, 2010 Report Share Posted January 7, 2010 Nice job! I wouldn't have sprayed the delta ring on old carbine tho Link to post Share on other sites
aznriptide859 Posted January 7, 2010 Report Share Posted January 7, 2010 AZN, are you bringing both of those with you to wonderful NC? If so I cant wait to see them The MBR, yes, but not the Colt - gun bag wouldn't fit 4 guns XD, it has the shotgun and P90 in it already LOL. Oh well, maybe some time later Link to post Share on other sites
MS3 Race Posted January 7, 2010 Report Share Posted January 7, 2010 (edited) Nice throwback, Azn. I love that 90's look. Edited January 7, 2010 by MS3 Race Link to post Share on other sites
Hispeed1 Posted January 8, 2010 Report Share Posted January 8, 2010 SR-16 Recce update; so there's a bunch of cool SR-15 E3's with a midlength URX II rail running either a 12.5" or 16" barrel. I wanted to be different and went with a full-length URX II rail but with a 16" barrel. Need a couple of more things, but its pretty much done. This is a newer set-up, will post more pics later of the regular when the sun cooperates. (Re-post from Knights pic thread) Link to post Share on other sites
aznriptide859 Posted January 8, 2010 Report Share Posted January 8, 2010 Very noice, those SCAR rail covers must feel good Question - I JUST noticed M733 handguards are longer than their M4 counterparts (fail on my part XD). Any way of getting them to fit the same front assembly, or will I need a new one? Any suggestions are welcome (i.e. mods, cutting, etc). Link to post Share on other sites
Hispeed1 Posted January 8, 2010 Report Share Posted January 8, 2010 Very noice, those SCAR rail covers must feel good Question - I JUST noticed M733 handguards are longer than their M4 counterparts (fail on my part XD). Any way of getting them to fit the same front assembly, or will I need a new one? Any suggestions are welcome (i.e. mods, cutting, etc). Ya, they're lower profile-not as thick as the regular TD ones. Link to post Share on other sites
Luis21 Posted January 8, 2010 Report Share Posted January 8, 2010 Does anyone here have a standard G&P/VFC KAC RIS or a Socom Gear Mk.18 RIS II in FDE that they can sell me? Thanks, -Luis Link to post Share on other sites
fiddlesticks4220 Posted January 8, 2010 Report Share Posted January 8, 2010 HS, If I may make a suggestion about your light's pressure switch, I find it easier to mount the pressure switch panel at the 12 O'clock position, it is easier to engage the light weather you shoot left or right. Link to post Share on other sites
The Crunchy Bunny Posted January 9, 2010 Report Share Posted January 9, 2010 Thats hot Hispeed. The lightened barrel looks awesome. (from a KAC PDW right?). Link to post Share on other sites
GoLgO 13 Posted January 9, 2010 Report Share Posted January 9, 2010 Link to post Share on other sites
RacingManiac Posted January 9, 2010 Report Share Posted January 9, 2010 I love it....the MK18 RIS II rail in that strange bronze color may work better, but as it is looks very hot... Link to post Share on other sites
Kiki-Jiki Posted January 9, 2010 Report Share Posted January 9, 2010 There's so much FDE/tan and win in those couple pictures that my head just exploded. Well done sir, well done. Link to post Share on other sites
Kenworth W900 Posted January 9, 2010 Report Share Posted January 9, 2010 <snip> Got Magpul? Link to post Share on other sites
hwagan Posted January 9, 2010 Report Share Posted January 9, 2010 (edited) That's the fanciest tan/desert looking set up i've ever seen in my life. I'm not a massive fan of tan, but that's VERY well done. Also, an excuse to publicise my VIS in it's most recent set-up: Edited January 9, 2010 by hwagan Link to post Share on other sites
kojak Posted January 9, 2010 Report Share Posted January 9, 2010 Just mounted my CASV from egzil (a mere 24 hours after I paid for it): Still a work in progress, waiting for the 600C Scout Light, UBR, and MIAD. I was going to spray the CASV black, but the two-tone look is growing on me--I may just leave it and get the grip and stock in FDE. I'm currently using a VLTOR flash hider with a CCW adapter, when I find the original FH the gap between the HALO and the gas block will be gone. Link to post Share on other sites
Puding Posted January 9, 2010 Report Share Posted January 9, 2010 (edited) finished block2 m4 cqb gbb know with peq battery box and m3 flashlight for looks, just need to apply my planned paint job Edited January 9, 2010 by Puding Link to post Share on other sites
Recommended Posts