hkssr20det Posted August 2, 2007 Report Share Posted August 2, 2007 Really? The left one is full metal and the right one is HW. Go figure, not to me. I have a first gen INOX and that one looks toyish to me. Link to post Share on other sites
junior Posted August 3, 2007 Report Share Posted August 3, 2007 I got around to bead blasting the barrel yesterday... Link to post Share on other sites
my_plague_666 Posted August 3, 2007 Report Share Posted August 3, 2007 i'd blast the recoil guide rod too. it looks out of place next to the silver barrel and i dont think the wear looks right on such a nice condition, clean gun Link to post Share on other sites
chris u'5 Posted August 3, 2007 Report Share Posted August 3, 2007 hkssr20det, Can I please ask how easy it was to fit the wooden grips onto your Berettas? In particular to the black Pefect Version. I have one and I wouldnt mind fitting some new grips to it for a change. Thanks, Chris Link to post Share on other sites
hkssr20det Posted August 3, 2007 Report Share Posted August 3, 2007 WA Berettas take real steel grips with no mods. On the black version they just dropped right on, the INOX required a little tephlon to space the screws down on them a little, but not mods. Easy change. Link to post Share on other sites
LboroSlider Posted August 3, 2007 Report Share Posted August 3, 2007 Hey everyone, here's my addition, KJW M9 Elite Link to post Share on other sites
chris u'5 Posted August 5, 2007 Report Share Posted August 5, 2007 (edited) hkssr20det, Thanks for the reply regarding the grips. I'm definitely going to try and get hold of some real grips for my Beretta. By they way, your silver 84s looks amazing. I really like the wooden grips with the silver frame. You should be very proud! Chris Edited August 5, 2007 by chris u'5 Link to post Share on other sites
DazJW Posted August 5, 2007 Report Share Posted August 5, 2007 By they way, your silver 84s looks amazing. I really like the wooden grips with the silver frame. You should be very proud! Chris <{POST_SNAPBACK}> QFT, those look seriously nice. My fifth Beretta M9, fourth Marui and second Biohazard (unless you count the HFC two tone). Standard with Stainless outer barrel: Black version: Gonna get a rail to go with the black version to balance out the long mag. Was actually after a rail and comp in one that didn't cost loads, but I couldn't find any comps let alone one piece units. Link to post Share on other sites
tom_clancy84 Posted August 5, 2007 Report Share Posted August 5, 2007 Gun N' Roses Link to post Share on other sites
tom_clancy84 Posted August 5, 2007 Report Share Posted August 5, 2007 (edited) Edited August 5, 2007 by tom_clancy84 Link to post Share on other sites
Little para Posted August 5, 2007 Report Share Posted August 5, 2007 Very MGS. I like it. Link to post Share on other sites
polystyrene Posted August 6, 2007 Report Share Posted August 6, 2007 I got around to bead blasting the barrel yesterday... <{POST_SNAPBACK}> that is one of the sexies beretta's ive seen yet. i normally dont like the molded grip on them but it fits that perfect. Link to post Share on other sites
tom_clancy84 Posted August 6, 2007 Report Share Posted August 6, 2007 that is one of the sexies beretta's ive seen yet. i normally dont like the molded grip on them but it fits that perfect. <{POST_SNAPBACK}> Nice hogue grip. Would also be perfect for replacement on a KSC's. Link to post Share on other sites
junior Posted August 7, 2007 Report Share Posted August 7, 2007 (edited) Thanks, I got a bit of internal work to do before its completely done. The gun still needs more power... BTW, those are stock TM Tac Master grips... Edited August 7, 2007 by junior Link to post Share on other sites
hkssr20det Posted August 10, 2007 Report Share Posted August 10, 2007 TM Tac Master Link to post Share on other sites
DarkLite Posted August 11, 2007 Report Share Posted August 11, 2007 Did you solder those grips? Link to post Share on other sites
lightprocess Posted August 11, 2007 Report Share Posted August 11, 2007 Did you solder those grips? <{POST_SNAPBACK}> Ergo grips: linky They're fairly abrasive; about as rough as you could even need/want grips to be. But you'll never drop your piece =P. Link to post Share on other sites
hkssr20det Posted August 11, 2007 Report Share Posted August 11, 2007 Yup, Ergos they are. They did take a bit of fitting on the left grip, had to remove most of the center support pieces and a little bit off the top. Not bad. Link to post Share on other sites
junior Posted August 31, 2007 Report Share Posted August 31, 2007 Prime M84S Courtesy of Hkssr20det I'll get some better pictures in the daytime.... Link to post Share on other sites
Jorge14 Posted August 31, 2007 Report Share Posted August 31, 2007 TM M9 Man, my camera is equal to that of a web cam, too bad I spend all my money on airsoft and not a decent camera >_> Also, planning to keep the standard M9 look. Link to post Share on other sites
Pinkfloyd Posted September 1, 2007 Report Share Posted September 1, 2007 <{POST_SNAPBACK}> WOW! I absolutly love that in white, highly unussual and very classy. Looks liek the sort of thing I would do to one of my guns! Very cool indeed, although I would have made the grips red. Link to post Share on other sites
General Mazaki Posted September 1, 2007 Report Share Posted September 1, 2007 My new KWA M93R II with metal outter barrel and slide (): (Yes, my finger is on the trigger... bite me.) <{POST_SNAPBACK}> Why with the orange? Link to post Share on other sites
dannyboy Posted September 1, 2007 Report Share Posted September 1, 2007 *looks at date of quoted picture* *headbutts desk* Link to post Share on other sites
General Mazaki Posted September 1, 2007 Report Share Posted September 1, 2007 *looks at date of quoted picture* *headbutts desk* <{POST_SNAPBACK}> heh heh heh. Link to post Share on other sites
BiGSeXyFLaVoR Posted September 3, 2007 Report Share Posted September 3, 2007 I just watched "The Professional" and I love that beretta. I cant find any compensators for my KSC M9. I only found this one http://www.airsoftextreme.com/store/index....roducts_id=1040 Would it fit (with / without modding it)? Link to post Share on other sites
Recommended Posts