6ft4 Posted August 16, 2007 Report Share Posted August 16, 2007 put the Zeiss Z-point infront of the single optic and it changes to 3X red dot. similar concept as i used the Eotech 553 with Aimpoint 3X. Link to post Share on other sites
BP-anon Posted August 16, 2007 Report Share Posted August 16, 2007 that's really cool... it's the right height? Link to post Share on other sites
6ft4 Posted August 17, 2007 Report Share Posted August 17, 2007 that's really cool... it's the right height? <{POST_SNAPBACK}> the Z-point is alittle bit low...but i can change the dot to fit with the 3X optic. last pic shows it had been changed already. Link to post Share on other sites
6ft4 Posted August 17, 2007 Report Share Posted August 17, 2007 should i put the PEQ6 next to the carrying handle???? OR put the PEQ6 under the KAC RAS??? Pls feel free to give any comments!! Thanks!! Link to post Share on other sites
BP-anon Posted August 17, 2007 Report Share Posted August 17, 2007 Personally i'd go for the front top, but it all depends on whether or not you actually use the carry handle sight. OTOH, just donate it to my good cause Link to post Share on other sites
Kingmob3 Posted August 17, 2007 Report Share Posted August 17, 2007 I'd go for the side of the optic. KM Link to post Share on other sites
0nslaught Posted August 17, 2007 Report Share Posted August 17, 2007 next to the carry handle, it just doesnt look right on the RAS Link to post Share on other sites
Abelius Posted August 18, 2007 Report Share Posted August 18, 2007 To the RAS, putting it next to the optic will reduce your line of sight when aiming. Besides it kinda balances the gun. Link to post Share on other sites
Llama Posted August 18, 2007 Report Share Posted August 18, 2007 Why don't you put it on one of the sides of the ras? Link to post Share on other sites
ollie_ty Posted August 18, 2007 Report Share Posted August 18, 2007 or, move that Zeiss to the front, and put the PEQ on top! Link to post Share on other sites
0nslaught Posted August 18, 2007 Report Share Posted August 18, 2007 To the RAS, putting it next to the optic will reduce your line of sight when aiming. Besides it kinda balances the gun. <{POST_SNAPBACK}> but its completely to the side away from the handrail optic and the zeiss Link to post Share on other sites
eltee Posted August 18, 2007 Report Share Posted August 18, 2007 On our real steel HK's we put the light/laser under the barrel whenever possible. There are many practical and tactical reasons for doing this. However, on my current real G36 clone (see photo) the light is on the side with the TD pad on the other. From a tactical standpoint, you want your light / laser forward on the gun if you can. You lose a degree of illumination when the white light is back on a gun due to occlusion, plus you light up your gun making you more visible from the side. Link to post Share on other sites
Psychosis Posted August 19, 2007 Report Share Posted August 19, 2007 Finally my G36C is more or less complete... well at least externally An arty shot of the gun http://www.arniesairsoft.co.uk/forums/uplo..._220_185510.jpg A little overview http://www.arniesairsoft.co.uk/forums/uplo..._220_265567.jpg Upside down http://www.arniesairsoft.co.uk/forums/uplo..._220_673609.jpg Now finally with flip-up BUIS. Not the real MP7 style ones, but they will be replaced by real ones as soon as they or a well made replica (Marui/Maruzen?) becomes available. http://www.arniesairsoft.co.uk/forums/uplo..._220_206092.jpg BUIS deployed. Yes it's a co-witness setup http://www.arniesairsoft.co.uk/forums/uplo...4_220_94136.jpg Top View. It's a really streamlined weapon, nothing pokes out more than 15mm (except the flashlight of course). http://www.arniesairsoft.co.uk/forums/uplo..._220_329410.jpg Imagine how well it would feel in your hands List of components: CA G36C CA G36 Lowcaps 9.6V 1100mAh Akku EO-Tech 551 HDS A65/1 Rev. F Guarder Picatinny Rails G36c ''SLS'' (long under mountrail) Ledwave Z-5 Railmount Tactical light King Arms TD Replica Vertical Grip Prometheus Barrel 247mm Guarder Hop-Up Bucking, Silicon G&G Aluminium barrel/gaspiston/flashhider real H&K Aluminium scope rail G&P Flash QD Front Sight Guarder NB-44 Tactical Flip-Up Rearsight real H&K G36 tactical sling total cost ~ 1400 Euro <{POST_SNAPBACK}> Does anyone know where to find a carry handle like that? I've been looking all over, to no avail, and it appears that this member's been banned. Link to post Share on other sites
evilliboba Posted August 19, 2007 Report Share Posted August 19, 2007 Here. Link to post Share on other sites
Psychosis Posted August 19, 2007 Report Share Posted August 19, 2007 (edited) mmm, the STAR carry handle is more of the G36C style, just with full RIS in place of the iron sights. It's alright though, I think I've found what I was looking for: http://alpinetek.netfirms.com/guns/SL8/DocRak/ His listed address is just down the road from me in my hometown, convenient. Unfortunately, he may or may not still be in business, from other links I've read. Edited August 19, 2007 by Psychosis Link to post Share on other sites
6ft4 Posted August 19, 2007 Report Share Posted August 19, 2007 (edited) On our real steel HK's we put the light/laser under the barrel whenever possible. There are many practical and tactical reasons for doing this. However, on my current real G36 clone (see photo) the light is on the side with the TD pad on the other. From a tactical standpoint, you want your light / laser forward on the gun if you can. You lose a degree of illumination when the white light is back on a gun due to occlusion, plus you light up your gun making you more visible from the side. Eltee, I totally agree your point. the reason why i put the PEQ6 next to the carrying handle is after i have seen the below pics. LLM01 LAM-200 (PEQ6) Edited August 19, 2007 by 6ft4 Link to post Share on other sites
BP-anon Posted August 19, 2007 Report Share Posted August 19, 2007 Does the foregrip have enough room to fold? Link to post Share on other sites
Slash' Posted August 19, 2007 Report Share Posted August 19, 2007 Just about, yes. I don't tend to fold it much though. Link to post Share on other sites
Bizurkur Posted August 20, 2007 Report Share Posted August 20, 2007 http://i208.photobucket.com/albums/bb166/r...6Ccoolness1.jpg <{POST_SNAPBACK}> Holy wow. Never thought I'd like those large front grips, but that one looks nice, folding grip is a cool touch too. Link to post Share on other sites
BP-anon Posted August 20, 2007 Report Share Posted August 20, 2007 Yea... looks great. I'm planning on getting a KWA g36c with a big handgaurd, i'll let arnie's know how it goes. Probably 2mo Link to post Share on other sites
The_End Posted August 20, 2007 Report Share Posted August 20, 2007 Does anyone know where to find a carry handle like that? I've been looking all over, to no avail, and it appears that this member's been banned. <{POST_SNAPBACK}> Here Link to post Share on other sites
NeoVeNoM Posted August 21, 2007 Report Share Posted August 21, 2007 I added a magpul M93 stock (genuine) Had to dremel a lot because the hybrid buttstock didn't fit the magpul stock. Why you would ask? sometimes the stock was to large, sometimes to short, depending on the situation. it's important when you have to conserve your ammo. Link to post Share on other sites
El_Boomo Posted August 21, 2007 Report Share Posted August 21, 2007 I really dislike that stock. However, I quite like it on your g36. Good job! Link to post Share on other sites
Recommended Posts