Noveske Posted February 27, 2013 Report Share Posted February 27, 2013 What is that thing at the front of the right rail? Beauty anyway. ACE Tactical bottle opener. Quote Link to post Share on other sites
Ivan le Fou Posted February 27, 2013 Report Share Posted February 27, 2013 Ouuuuuuh now that's gold! And what's the hole for? Quote Link to post Share on other sites
Philbucknall Posted February 27, 2013 Report Share Posted February 27, 2013 Sling mount maybe? Quote Link to post Share on other sites
MRF Posted February 27, 2013 Report Share Posted February 27, 2013 I need tactical nut cracker now... Quote Link to post Share on other sites
Legionnaire759 Posted February 27, 2013 Report Share Posted February 27, 2013 Looks great with the normal mag Horsem4n. Quote Link to post Share on other sites
titchikov Posted March 17, 2013 Report Share Posted March 17, 2013 Also kagami, what's that thing that looks like a violently textured handstop? At the front of the 6 o'clock rail. Quote Link to post Share on other sites
Rogue845 Posted March 17, 2013 Report Share Posted March 17, 2013 I may have ruined the 'no snag' design principle, but here's my PDR: Quote Link to post Share on other sites
Agent Hunk Posted March 18, 2013 Report Share Posted March 18, 2013 My Mid-Length MOE is on the bottom: CA M15A4. ACM Surefire muzzle break. Magpul mid-length handguard. Magpul Scout mount. GG&G light ring. Solarforce L2. Magpul MVG. Magpul sling mount. VTAC 2-point sling. AMP Micro dot. ACM KAC BUIS. Magpul PTS trigger guard. Magpul PTS MOE grip. Magpul MOE stock. I like the MOE handguards but hate how they didnt run the accessory holes all the way back so I cut a new one for the sling mount. Going to paint it soon. Quote Link to post Share on other sites
hwagan Posted March 18, 2013 Report Share Posted March 18, 2013 Also kagami, what's that thing that looks like a violently textured handstop? At the front of the 6 o'clock rail. I'm fairly sure it's a barricade support; Basically so you can shove the gun up against a wall/other piece of cover and it'll provide a more stable firing platform. Quote Link to post Share on other sites
Mirska Posted March 20, 2013 Report Share Posted March 20, 2013 Slight update on my middy. Quote Link to post Share on other sites
northernairsofter Posted March 25, 2013 Report Share Posted March 25, 2013 MOE goodness. Quote Link to post Share on other sites
JoeMama Posted March 27, 2013 Report Share Posted March 27, 2013 Quote Link to post Share on other sites
war_veteran117 Posted March 27, 2013 Report Share Posted March 27, 2013 Quote Link to post Share on other sites
TheFull9 Posted April 14, 2013 Report Share Posted April 14, 2013 Picked up a Dytac URX 3 to see if it might be possible to use a thinner rail on a TM SOCOM, given that it's one of the few designs with an easily removable lower quadrant for battery access. Unfortunately, once fitted the barrel ended up being significantly canted to the right for some reason, so I din't get a chance to try and squeeze a 7.4v nun-chuck in there. If I can ever figure out what caused the stock barrel to end up being so far off true I'll give it another try. For now I've had to go back to the 12" Dytac barrel with 10" King Arms Troy MRF. Quote Link to post Share on other sites
QQexDERA Posted April 15, 2013 Report Share Posted April 15, 2013 (edited) It's down to the poor way that Dytac thread them. I had the same problem with a Dytac URX 3 (though it was the imperial threaded one for a PTW, not the metric threaded one that you have there). Strangely, the metric threaded URX 3.1 I have sits perfectly, but the URX 3 I had was dire - WAY too much free play (not that the URX 3.1 is much better!) Edited April 15, 2013 by QQexDERA Quote Link to post Share on other sites
Mirska Posted April 15, 2013 Report Share Posted April 15, 2013 Phew, now im not even remotely annoyed that i bought a RS URX III just 2 days before dytac started to ship. Quote Link to post Share on other sites
MRF Posted April 15, 2013 Report Share Posted April 15, 2013 http://www.shootercbgear.com/product_info.php?products_id=6442 Perhaps this could be a better solution - if only Iron Airsoft decides to expend URX line... Quote Link to post Share on other sites
TheFull9 Posted April 15, 2013 Report Share Posted April 15, 2013 (edited) This case wasn't actually down to the Dytac, I don't believe anyway. I swapped around and combined 3 SOCOM uppers, 2 x 14.5" TM barrels, 2 x TM barrel bases, a Dytac barrel, a PDI barrel, 2 TM SOPMOD type barrel nuts, 3 different RS-style airsoft barrel nuts, various shims... put basically every different part on each upper in all the combinations I could, and the 14.5" barrels were always wonky except for one very specific setup. That's why I'm rather stumped, you'd expect maybe 1 or 2 bits out of all that to maybe have slight errors but all that stuff? I thought it might be the fact of having to use shims with anything but the weird proprietary TM barrel nuts, but the Dytac barrel sat straight in every config and that needs shims when using a normal style nut as well. Bit of a mystery. Edited April 15, 2013 by CKinnerley Quote Link to post Share on other sites
QQexDERA Posted April 15, 2013 Report Share Posted April 15, 2013 It might just be a slightly shonky receiver. I've had a couple of WE receivers where the end of the end of the receiver was at a very slight angle. Fine with short outer barrels, but more noticable the longer the outer barrel was. Quote Link to post Share on other sites
hwagan Posted April 16, 2013 Report Share Posted April 16, 2013 (edited) Been a while since I put pictures of my LM4 up, so ta-da... Edited April 16, 2013 by hwagan Quote Link to post Share on other sites
Curly68 Posted April 16, 2013 Report Share Posted April 16, 2013 What size battle rail and barrel combo in your last pic please? Looks lovely! Quote Link to post Share on other sites
hwagan Posted April 17, 2013 Report Share Posted April 17, 2013 What size battle rail and barrel combo in your last pic please? Looks lovely! Thanks man - It's a 9" VTAC Rail with a standard M4A1 14.5" barrel; It's got a removable 4" extension on the barrel, I generally run it as a 10.5 in games but the 14.5 looks way better. Quote Link to post Share on other sites
Robinio Posted April 19, 2013 Report Share Posted April 19, 2013 Got a Madbull KX3 Flashider and a SF M961 replica, also an E-mag. Quote Link to post Share on other sites
ollie_ty Posted April 19, 2013 Report Share Posted April 19, 2013 Now THAT is great! Quote Link to post Share on other sites
Curly68 Posted April 30, 2013 Report Share Posted April 30, 2013 Here is my finished M7A1 CQB weapon. It has Magpul Miad grip and trigger guard, CTR stock, MOE foregrip and runs P Mags. It is metal bodied and RIS with a chinese T1 sight. Internally it has been shimmed and runs M100 spring chrono'ing at 340FPS with a Madbull Ultimate hop, blue rubber and 6.03 tightbore. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.