Wingmann Posted July 22, 2011 Report Share Posted July 22, 2011 Saved a couple of compositions for the HK thread Quote Link to post Share on other sites
SHWEL Posted July 22, 2011 Report Share Posted July 22, 2011 (edited) Referrencing the G3 convo... Is there space inside the body of the gun above the Gearbox? I only ask because I found a very flat Lipo setup (Nunchuck style, but flat) that might fit in that tight space. here they are in my masada Railed handguard.. Very tight space. Second pic shows what one lipo looks like, but there is another one above the Outer barrel in this pic. a total of 4 cells fit in the handguard.. Edited July 22, 2011 by SHWEL Quote Link to post Share on other sites
Imperator Posted July 22, 2011 Report Share Posted July 22, 2011 @SHWEL Funny you brought this up again. Above the gearbox is just impossible. Way too tight, and it's where some screws are, for uniting the two halves of the body. However, I did find, early this weak, a battery similar too yours, that, I believe, will fit inside the handguard! The place for it is like in your pic, above the barrel, and beneath the cocking-handle tube. I haven't bought it, but according to my calculations and the battery specs the site announces, it will fit! Snugly, but will fit. It's a nunchuck like yours, and as long as it's under 7 mm tall, 21 mm wide and 110 mm long it will fit. But first there is a little bit of dremmeling to be had in that area. There's this bit of material, just above the barrel, after the two prongs that unite the cocking tube with the body, that needs to be cut out. It's there doing nothing actually, and it's removal won't interfere with the guns' sturdiness. I'll try to do this mod on one of my G3's, and post pics. Quote Link to post Share on other sites
Vice Posted July 23, 2011 Report Share Posted July 23, 2011 (edited) I run 7.v 2200mah nunchuck Lipos under my both my G3's RIS; the size is 101 x 19.8 x 12.3mm (LxWxH). This fits in the full length G3 and the M41 I have. Pics related: Its the battery mounted in my M41's ris. No dremelling required.. just a bit of fung shei when fitting. And for good measure: Edited July 23, 2011 by Vice 2 Quote Link to post Share on other sites
Imperator Posted July 23, 2011 Report Share Posted July 23, 2011 I run 7.v 2200mah nunchuck Lipos under my both my G3's RIS; the size is 101 x 19.8 x 12.3mm (LxWxH). This fits in the full length G3 and the M41 I have. Pics related: Its the battery mounted in my M41's ris. No dremelling required.. just a bit of fung shei when fitting. http://farm7.static.flickr.com/6150/5966631463_da06bdd72b_z.jpg And for good measure: http://farm7.static.flickr.com/6149/5966631469_0267c0291a_z.jpg The problem is that the original A3 hand-guard is not wide enough to accomodate bateries, at least none that is availale. It's just no good. Hence, I started thinking a little out of the box and got to that place I mention in my previous post. Still in the front, but not exactly inside the hand-guard, per se. Quote Link to post Share on other sites
titchikov Posted July 24, 2011 Report Share Posted July 24, 2011 I like that G3 Vice. Quote Link to post Share on other sites
Imperator Posted July 24, 2011 Report Share Posted July 24, 2011 Ok then. Just hacked one of my G3's a bit more to show you guys where a battery will most likely fit, at the front, in the A4 configuration. Top front end in the pic is a normal, not chopped, TM G3. The inferior one is lacking some bits of plastic just above the barrel, that's where the battery will go: In those two small spaces will fit a flat nunchuck type battery with the following maximum dimensions: 105mm x 22mm x 7mm Quote Link to post Share on other sites
FELDJAGER Posted July 25, 2011 Report Share Posted July 25, 2011 This battery might fit in that space Imperator http://shop.ehobbyasia.com/king-arms-7-4v-1100mah-15c-twin-type-lithium-battery.html ARES G36K, parts list in the G36 thread 1 Quote Link to post Share on other sites
Imperator Posted July 25, 2011 Report Share Posted July 25, 2011 Thanks FELDJAGER! With those measurments, it does. Quote Link to post Share on other sites
The Vainguard Posted August 3, 2011 Report Share Posted August 3, 2011 Quote Link to post Share on other sites
skaos Posted August 9, 2011 Report Share Posted August 9, 2011 (edited) my HK babies, both are ACMs Edited August 9, 2011 by skaos 1 Quote Link to post Share on other sites
Ivan le Fou Posted August 9, 2011 Report Share Posted August 9, 2011 GBBs? Do they work well? Quote Link to post Share on other sites
skaos Posted August 10, 2011 Report Share Posted August 10, 2011 nope, they are NBBs, a copy of the Marui mk23, pretty good ones though Quote Link to post Share on other sites
aznriptide859 Posted August 10, 2011 Report Share Posted August 10, 2011 Y&P's. In some ways they're better than the TM (at least the mags are). Quote Link to post Share on other sites
chas Posted August 10, 2011 Report Share Posted August 10, 2011 Anyone know of an HK shop where they have these? I only can seem to to find them in the US. Quote Link to post Share on other sites
Dreamer777 Posted August 10, 2011 Report Share Posted August 10, 2011 You can put a flashlight handgaurd on those? i never knew. forget M4's i've converted Quote Link to post Share on other sites
skaos Posted August 10, 2011 Report Share Posted August 10, 2011 Anyone know of an HK shop where they have these? I only can seem to to find them in the US. taiwangun has them Quote Link to post Share on other sites
chas Posted August 11, 2011 Report Share Posted August 11, 2011 This Y&P or STTI Mk23, is it possible to put some long tightbore inner barrel (hiding it inside the silencer) and use it as sort of "sniper" pistol? Is it accurate and consistent enough? Quote Link to post Share on other sites
Horsem4n Posted August 12, 2011 Report Share Posted August 12, 2011 yeah, as long as you get a better hop rubber in there. it wont give you the same feel or life time of a marui, but it will take upgrades and perform just about as good, if not the same. Quote Link to post Share on other sites
skaos Posted August 12, 2011 Report Share Posted August 12, 2011 This Y&P or STTI Mk23, is it possible to put some long tightbore inner barrel (hiding it inside the silencer) and use it as sort of "sniper" pistol? Is it accurate and consistent enough? Stti and y&p's are the same, in this china clone versions you don't have to put a longer barrel. It has an inner barrel in the silencer too. Quote Link to post Share on other sites
chas Posted August 12, 2011 Report Share Posted August 12, 2011 Ehh... I dont think you can just put an inner barrel in front of another inner barrel. Quote Link to post Share on other sites
skaos Posted August 12, 2011 Report Share Posted August 12, 2011 it works pretty good though Quote Link to post Share on other sites
chas Posted August 12, 2011 Report Share Posted August 12, 2011 Well, *fruitcage* me sideways. Guess Il have to swallow my own words. Quote Link to post Share on other sites
oRb Posted August 12, 2011 Report Share Posted August 12, 2011 Custom Iron Airsoft HK416 GBB with H&K Parts & Aimpoint Patrol Regards orb Quote Link to post Share on other sites
WhiteHawksan Posted August 12, 2011 Report Share Posted August 12, 2011 nice orb, but I don't see anything custom about it? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.