Jim01 Posted January 17, 2014 Report Share Posted January 17, 2014 That's insanely cool. Quote Link to post Share on other sites
Isamu Posted January 17, 2014 Report Share Posted January 17, 2014 Impressive PDW PKM, but a 7" barrel and rail would have been better suited IMO Quote Link to post Share on other sites
DeltaZero Posted January 17, 2014 Report Share Posted January 17, 2014 No that rail is perfect!! I love the use of the HK416C stock! Where can i get one sold separately? Quote Link to post Share on other sites
Horsem4n Posted January 17, 2014 Report Share Posted January 17, 2014 well, there are 2 versions of the honey badger. a 7 inch rail version and an 11 inch rail version. Â Quote Link to post Share on other sites
hitmanNo2 Posted January 17, 2014 Report Share Posted January 17, 2014 No that rail is perfect!! I love the use of the HK416C stock! Where can i get one sold separately? Unfortunately you can't. I've tried VFC and G&P direct. You have to buy one of the three guns it comes on. Quote Link to post Share on other sites
DarkLite Posted January 17, 2014 Report Share Posted January 17, 2014 http://img.photobucket.com/albums/v107/TheManWithThePlasticMag/Airsoft/DSC04161_zpsd7ceab1c.jpg http://img.photobucket.com/albums/v107/TheManWithThePlasticMag/Airsoft/DSC04162_zps22a6b5a7.jpg Aaand now I know what my next build is going to be, cheers. Sincerest form of flattery and all that. Quote Link to post Share on other sites
pkm200901 Posted January 17, 2014 Report Share Posted January 17, 2014 (edited) Thanks fellas. I was inspired by the Honey Badger but more by a build by Unity Tactical. Â Isamu, that's a 5" barrel with an 9" rail. I went as short as I could on the front end, if I had gone shorter the PEQ (battery box) wouldn't fit. Finding a suppressor to fit inside the rail was a pain in the rear, most are slightly too large in diameter. Â Regarding the stock, I was lucky and picked it up used here. Once I bought it I knew what the build was going to be. I only wish that the grip angle could be changed for an AEG base, because the PDW grip (while good) is awkward with such a short stock. Edited January 17, 2014 by pkm200901 Quote Link to post Share on other sites
Leon Kennedy Posted January 17, 2014 Report Share Posted January 17, 2014 Damn you guys. The urge is stronger now. Quote Link to post Share on other sites
DeltaZero Posted January 18, 2014 Report Share Posted January 18, 2014 Damn it! Looks like I've got to buy a new gun now! Quote Link to post Share on other sites
hiawatha Posted January 18, 2014 Report Share Posted January 18, 2014 PKM please tell me what brand Eotech and battery peq you have on there? Both seem to be of good quality. Thank you Quote Link to post Share on other sites
ollie_ty Posted January 18, 2014 Report Share Posted January 18, 2014 I only wish that the grip angle could be changed for an AEG base, because the PDW grip (while good) is awkward with such a short stock. Â Â Â The stock is adjustable though? Quote Link to post Share on other sites
pkm200901 Posted January 18, 2014 Report Share Posted January 18, 2014 (edited) ollie - Sure, from short to less short. There are two adjustment cuts, both at the end of the stock tubes. It's got about the same length as a 1/2 collapsed M4 stock. It's a compact stock, I don't have compact arms. Unfortunately, there's no more room to add length to the stock tubes since the ejection port and bolt catch get in the way. Â hiawatha - that's a generic battery box I picked up from a local store. The optic is a Bushnell holosight. Edited January 18, 2014 by pkm200901 Quote Link to post Share on other sites
hitmanNo2 Posted January 18, 2014 Report Share Posted January 18, 2014 I'll take it off your hands if you can't cope with it anymore Quote Link to post Share on other sites
pkm200901 Posted January 18, 2014 Report Share Posted January 18, 2014 Thanks for your generous offer! Â I don't actually play airsoft worth a damn, I just enjoy building the guns, so I'll probably get bored with it in a while and if I sell it I'm sure there will be buyers. 1 Quote Link to post Share on other sites
ollie_ty Posted January 18, 2014 Report Share Posted January 18, 2014 Ah I get you now! Quote Link to post Share on other sites
Ivan le Fou Posted January 18, 2014 Report Share Posted January 18, 2014 Â 2 Quote Link to post Share on other sites
Whitehawk Posted January 18, 2014 Report Share Posted January 18, 2014 Awesome as always Ivan le Fou!Only thing I would change, is that aimpoint M4 to M4S. Just because. Quote Link to post Share on other sites
MRF Posted January 19, 2014 Report Share Posted January 19, 2014 Awesome as always Ivan le Fou! Â Only thing I would change, is that aimpoint M4 to M4S. Just because. Agreed. But actually it's not "just because" - M4S is just more slim and better looking. Unfortunately copies are hard to come by... Quote Link to post Share on other sites
pforcerecon Posted January 19, 2014 Report Share Posted January 19, 2014 Question...what uppers are compatible with a VFC lower other than well...another upper from a VFC gun. I'm looking to build a separate upper for my VFC Mk18 Mod0 Quote Link to post Share on other sites
aznriptide859 Posted January 19, 2014 Report Share Posted January 19, 2014 (edited) Probably just VFC lol. Polarstar too, but their guns are based off VFC's. Edited January 19, 2014 by aznriptide859 Quote Link to post Share on other sites
pforcerecon Posted January 19, 2014 Report Share Posted January 19, 2014 aznriptide859: Got a link for a site where I could just order the upper or even a complete upper and lower? Quote Link to post Share on other sites
MRF Posted January 19, 2014 Report Share Posted January 19, 2014 Question...what uppers are compatible with a VFC lower other than well...another upper from a VFC gun. I'm looking to build a separate upper for my VFC Mk18 Mod0 I don't think any other fits, but You could check King Arms. Quote Link to post Share on other sites
Ivan le Fou Posted January 19, 2014 Report Share Posted January 19, 2014 I have been thinking, and breaking MRF's balls with questions (), about something.Mostly: issues of compatibility between DYTAC and King Arms. The thing is I have decided to finally sell my Larue 12" to MRF, and it has to be replaced. After a long and intense thinking I decided a URX III 12.5 would be the perfect substitute.Only a few brands produce it: 5KU (no thank you), G&P and DYTAC (PTW & Marui).And so, after spending much time harassing MRFÂ with my questions (should I use a PTW or a Marui version to fit on my King Arms upper?), I wonder about the G&P compatibility.All the shops have close to no information on anything. Quote Link to post Share on other sites
blam360 Posted January 19, 2014 Report Share Posted January 19, 2014 dytac will fit on a KA no problem, but G&P runs imperial threading so will not fit on a KA until you rethread the upper.  in my experience, G&P has the nicest urx III clone. the 5KU comes with white markings and the dytac comes with a loose front site. both issues are non-existent on the G&P 1 Quote Link to post Share on other sites
Ivan le Fou Posted January 19, 2014 Report Share Posted January 19, 2014 Loose front site? You mean wobbly? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.