BigBabyMoses06 Posted September 8, 2013 Report Share Posted September 8, 2013 Does anyone else have the urge to tap it for compressed air? Olala... Quote Link to post Share on other sites
Norotor Posted September 8, 2013 Report Share Posted September 8, 2013 I will, I've been waiting to see how the gas gets routed from the gas canister in the stock to the receiver. After seeing that posted link with the g&p ar stock adapter install and how the did it, I'll definitely pick up the marui m870 and run it on HPA. Quote Link to post Share on other sites
DangerWerx Posted September 9, 2013 Report Share Posted September 9, 2013 Will this mag conversion be a simple drop in component and easily changeable back to stock? Yes. Does anyone else have the urge to tap it for compressed air? Olala... I have my MagnumBB Cold Shot ready and a spare tank on order. Will report with results once converted. 1 Quote Link to post Share on other sites
blobface Posted September 11, 2013 Report Share Posted September 11, 2013 Just dissembled this thing "blind", i.e. without a dissembly guide. Had to do it in order to get the outer barrel out to be machined (adding choke thread)... what a pain in the face just to get to the outer barrel. Quote Link to post Share on other sites
sacairsoftsn00py Posted September 11, 2013 Report Share Posted September 11, 2013 Yeah...its a pita. Least the gun isnt something you need to take apart a lot of times. Im hoping ff comes out with a short outer barrel with sights for this. I dont really want to modify it. Sent from my Samsung Galaxy S4 using Tapatalk 2 Quote Link to post Share on other sites
blobface Posted September 11, 2013 Report Share Posted September 11, 2013 Yeah I agree, I like the long barrel look (even though playing it in a CQB site proved to be a bit too long and awkward as it is), especially with a mag extension, things I see in movies / tv a lot but airsoft never replicated, so I'm happy I can work towards it, basically having mine threaded so that I can put on the Express tactical choke on it which I recently bought Quote Link to post Share on other sites
-wigs- Posted September 12, 2013 Report Share Posted September 12, 2013 Ugh I really wish wgc just sent the possibly defective gun. I could care less if I shoot 5 I just want my shotgun. Sooo many plans for it Quote Link to post Share on other sites
Aod Posted September 12, 2013 Report Share Posted September 12, 2013 Yeah I agree, I like the long barrel look (even though playing it in a CQB site proved to be a bit too long and awkward as it is), especially with a mag extension, things I see in movies / tv a lot but airsoft never replicated, so I'm happy I can work towards it, basically having mine threaded so that I can put on the Express tactical choke on it which I recently bought Can you give me some more information about your Mag extension? are you extending the actual magazine/shell/thing or the Magazine Tube under the barrel? I really want to make/find an extension for the mag tube for mine! Quote Link to post Share on other sites
Brigg Posted September 16, 2013 Report Share Posted September 16, 2013 Does anyone know where to get the replacement parts to fix the 5-shot problem yet? Quote Link to post Share on other sites
sacairsoftsn00py Posted September 16, 2013 Report Share Posted September 16, 2013 Echigoya told me that ill need to send in my hop unit for a replacement one. If you rack the charging handle slowly...itll load 6.... Sent from my Samsung Galaxy S4 using Tapatalk 2 Quote Link to post Share on other sites
-wigs- Posted September 18, 2013 Report Share Posted September 18, 2013 I would love someone to restock it, mine was recalled by wgc and now it seems I'm sol in getting one Quote Link to post Share on other sites
blobface Posted September 20, 2013 Report Share Posted September 20, 2013 (edited) Target: As a continuation of my 870 modding, just sent off all the files for the shell holder to be made in 7075, tasty! My Meprolight tritium sights arrived from Israel, sadly nothing fits, front sight is far too small, so I will have to machine a sight base that takes real steel sight, which is fine, but I don't know what the fruitcage is going on with the rear sight, anyhow, and here's the barrel / choke mod. Real steel Remington express tactical choke, modded to fit. Now I just have to wait for my 2 round extension to arrive.. back order from Midway Edited September 20, 2013 by blobface 2 Quote Link to post Share on other sites
spetsnazdave87 Posted September 20, 2013 Author Report Share Posted September 20, 2013 Seriously blobface, stop teasing me with incredible things far outside my technical ability or funds to achieve. Quote Link to post Share on other sites
trip Posted September 21, 2013 Report Share Posted September 21, 2013 With dave on this!! Take my money!!!!!!!! Quote Link to post Share on other sites
badsailor Posted September 21, 2013 Report Share Posted September 21, 2013 Used mine extensively today. Have to say, I love it. Only fired it in 3 shot mode though. I tried the 6 shot mode and it is definitely doing the 5 round thing unless you rack it really slow. 3 shot mode works great. The gun shoots straight and hard on 134a. I was able to get 5 shells out of one gas charge. Now, has anyone tried installing any RS parts yet? Like a Magpul MOE forend or a surefire LED? I know a shell magazine extension won't fit so I will have to try to manufacture one and mod it for a tactical choke as well. Quote Link to post Share on other sites
BerserkDS Posted September 21, 2013 Report Share Posted September 21, 2013 (edited) Ok, this is rather important.Anyone who is using green gas, have you notice your gas tank warping and widening on its own towards the rear where the pins seat? seams like mine is getting ready to explode soon.also, noticed mine over hops with .25 50% of the time. Edited September 21, 2013 by BerserkDS 2 Quote Link to post Share on other sites
Inari Posted September 22, 2013 Report Share Posted September 22, 2013 Jesus - any chance of a picture of the warping tank? Quote Link to post Share on other sites
Stuey Posted September 22, 2013 Report Share Posted September 22, 2013 Kinda scary... Quote Link to post Share on other sites
bankz5152 Posted September 22, 2013 Report Share Posted September 22, 2013 Happens with WE 1911 mags too where the mag walls where milled so thin. Sent from my GT-I9300 using Tapatalk 2 Quote Link to post Share on other sites
Stuey Posted September 22, 2013 Report Share Posted September 22, 2013 Milled? I seriously doubt anything on a WE gun is milled... 3 Quote Link to post Share on other sites
PureSilver Posted September 22, 2013 Report Share Posted September 22, 2013 Anyone who is using green gas, have you notice your gas tank warping and widening on its own towards the rear where the pins seat? Uh, that doesn't sound good. Get some calipers out and measure the increase? I'd be very surprised if that was possible (or at least, if it was due to propane rather than tetrafluoroethane) unless you left the tanks somewhere very hot? 2 Quote Link to post Share on other sites
onizuka-gto Posted September 23, 2013 Report Share Posted September 23, 2013 Ok, this is rather important. Anyone who is using green gas, have you notice your gas tank warping and widening on its own towards the rear where the pins seat? seams like mine is getting ready to explode soon. also, noticed mine over hops with .25 50% of the time. Nope. been running mine on green gas for three days now, left one semi-full last night. No problem so far. Mind you the temp. here is around 27-29C so i haven't been filling them to the max. 1 Quote Link to post Share on other sites
BerserkDS Posted September 24, 2013 Report Share Posted September 24, 2013 here you go. I noticed that because of this, the tank does not slide out easily anymore. and causes the walls of the stock to widen, causing my buttpad to be easily removed just by lightly pulling. This has caused my buttpad to fall off frequently during game play from switching shoulders. Quote Link to post Share on other sites
BerserkDS Posted September 24, 2013 Report Share Posted September 24, 2013 (edited) Oh also, my body pins keeping getting pushed out on their own when using it. WTF is up with this gun...or should I say my gun. Edited September 24, 2013 by BerserkDS Quote Link to post Share on other sites
Wingmann Posted September 24, 2013 Report Share Posted September 24, 2013 I noticed it was harder to get it out when using propane. Interesting. Has anyone had problems filling up the tank? I've tried three different kinds of adapters/bottles and there's more gas going out than in, and that's causing bad fills (20-30 shot fills). Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.