bigbaby Posted November 4, 2006 Report Share Posted November 4, 2006 Got M203? Link to post Share on other sites
The Hammer Posted November 4, 2006 Report Share Posted November 4, 2006 I like 203's... Heres one without! Counter sniper. Link to post Share on other sites
BoB SoiL Posted November 5, 2006 Report Share Posted November 5, 2006 I guess you guys will be the best peeps to ask this, I'm looking into getting an SR25, This One to Be Precise. Anyhow, I've read something (somewhere) that mentioned SR25's have different dimensions to regular Armalites? How does this effect the gearbox, i.e. can I use a regular M16 aftermarket gearbox & regular aftermarket gearbox internals, or does the SR25 have specific internals much like the PSG-1? On a similar note, does it use the same kind of Hop unit as a regular M16? (main reason I ask is that my G&P M16 has an *awful* hop unit, shortly to be replaced...) Any insight would be muchly appreciated Link to post Share on other sites
1cem4n Posted November 5, 2006 Report Share Posted November 5, 2006 (edited) I know that the G&P SR25, and ONLY the G&P one, uses a different long gearbox. nothing like a PSG-1 though. I'm pretty sure you're SOL on aftermarket parts besides the G&P Specific SR-25 ones. I wouldn't trust any spring over 400fps with it but since you're in the UK, 328 is the max anyway? I'm pretty sure the Hop Up unit is the same as a regular m16. The hop up bucking should be replaced because mine tore really fast and i never had a jam. EDIT: nice counter-sniper Hammer. what type of bipod is that? i've never seen it before. the m16 with m203 looks really weird though, is that the battery in the foregrip? Edited November 5, 2006 by 1cem4n Link to post Share on other sites
The Hammer Posted November 5, 2006 Report Share Posted November 5, 2006 Bi-pods a TDI, its a real steel part and its a top bit of kit. The legs extend and are adjustable too. I bought that a few years ago, and its indestructable. Thats the standard handguard for the M16 with a 203 on it. Battery is in the stock. The M4 has the battery under the front handguard. The SR16 also has the battery in the stock. Link to post Share on other sites
1cem4n Posted November 5, 2006 Report Share Posted November 5, 2006 oh, i saw this white part in the hole so i was wondering lol. check out my SPR , you might have to go back to page 34 Link to post Share on other sites
No Mercy Posted November 5, 2006 Report Share Posted November 5, 2006 G&P Sr25 Doesnt Come standard with the Long gearbox It takes a Standard v2 box with an Extentend Nozzle Link to post Share on other sites
BoB SoiL Posted November 5, 2006 Report Share Posted November 5, 2006 (edited) check out my SPR<{POST_SNAPBACK}> I did, that's what rejuvenated my interest in the SR25 G&P Sr25 Doesnt Come standard with the Long gearbox It takes a Standard v2 box with an Extentend Nozzle <{POST_SNAPBACK}> Ah, I see... Thanks for that. Nevertheless, I'd lose the capacity to mag share with other people on the same team as myself I know that the G&P SR25, and ONLY the G&P one, uses a different long gearbox. nothing like a PSG-1 though. I'm pretty sure you're SOL on aftermarket parts besides the G&P Specific SR-25 ones. I wouldn't trust any spring over 400fps with it but since you're in the UK, 328 is the max anyway? I'm pretty sure the Hop Up unit is the same as a regular m16. The hop up bucking should be replaced because mine tore really fast and i never had a jam. <{POST_SNAPBACK}> Well, on the FPS front, some sites allow >328 for permanently semi-only Sniper Rifles, and an SR-25 is about the only "Sniper Rifle" I could want, so it makes sense to take advantage In hindsight, I'm probably better off going for something like This Receiver Kit and This Front Assembly, that way I can ensure the internals are easily replaceable, as well as retaining mag compatability with other 'softers (as well as for the SR25 style mags, I can just use VN mags ) Besides, I could start with, say a TM M4A1 and build it from that, an ongoing project of sorts (and TM make *very* good hop units ) Edited November 5, 2006 by BoB SoiL Link to post Share on other sites
1cem4n Posted November 5, 2006 Report Share Posted November 5, 2006 lol, thanks. it's a good all around gun. i was actually going to buy an sr-25 from G&P but it was out of stock, The G&G guns are a big no-no, and i don't want to install everything. i know for sure that the s-system has the newest hop up design from TM but i'm not sure if the m4a1 new type does. POST PICTURES when you're done. Link to post Share on other sites
LtDeathSauce Posted November 5, 2006 Report Share Posted November 5, 2006 Hey guys, I know this is in slightly the wrong section... BUT! What are the RIS options for a fullsize CAm15A4? I looked around and saw very little... Any recommendations/need to know stuff? Link to post Share on other sites
BoB SoiL Posted November 5, 2006 Report Share Posted November 5, 2006 i know for sure that the s-system has the newest hop up design from TM but i'm not sure if the m4a1 new type does. POST PICTURES when you're done. <{POST_SNAPBACK}> TM have released a 2006 version of the M4A1, this has basicaly brought it in line with all the newer Armalite variants, i.e. 1 piece hop unit etc w00t! And I intend to post piccies, matter of fact I'm looking at digicams at the moment so I can post pics of my respectable collection Hey guys, I know this is in slightly the wrong section... BUT! What are the RIS options for a fullsize CAm15A4? I looked around and saw very little... Any recommendations/need to know stuff? <{POST_SNAPBACK}> I take it you mean the M15A4 Rifle, i.e. the CA version of the M16? I'm not normally a fan of RIS on M16's, but I'll help out Looking for M16 accessories will probably be the best start, seeing as not many retailers (AFAIK) add descriptions to their products that relate to CA's numbering of M15xx. Here's a couple of suggestions; Classic Army RIS System for M16 Mosquito M16 RIS Hope that helps Link to post Share on other sites
1cem4n Posted November 5, 2006 Report Share Posted November 5, 2006 there are so many to list.... i like G&P ones and the Classic Army ones too. Link to post Share on other sites
master_titled Posted November 5, 2006 Report Share Posted November 5, 2006 Whack-a-mole! Link to post Share on other sites
LtDeathSauce Posted November 5, 2006 Report Share Posted November 5, 2006 Thanks guys, I suddenly feel really dumb. I was looking for m15 RIS... and usually I am so logical too... That one on Redwolf says its for the A2, is there going to be any probelms fitting that to an A4? Link to post Share on other sites
BoB SoiL Posted November 5, 2006 Report Share Posted November 5, 2006 AFAIK (if someone knows I'm wrong, don't hesitate to speak up)... All M4's have the same length foregrip, irrespective of barrel length (e.g. M4A1's and CQBR's have the same length foregrip)... Similarly, all M16's have the same length foregrip So, on that front, it should be the same size, OTOH, there may be some slight fitting issues (as there can be with any aftermarket parts), in general it's best to assume some minor filing may be required to get a snug fit Link to post Share on other sites
BaBaBooey Posted November 5, 2006 Report Share Posted November 5, 2006 I guess technically an "Armalite" - my LM&T Defender/Guardian carbine Link to post Share on other sites
dechande Posted November 5, 2006 Report Share Posted November 5, 2006 BaBaBooey, that is lovely +1. Link to post Share on other sites
1cem4n Posted November 6, 2006 Report Share Posted November 6, 2006 well..... finally a decent picture. i'd love some +1s Link to post Share on other sites
DOC. Posted November 6, 2006 Report Share Posted November 6, 2006 It seems decent, although It looks like you can do something to it making it exotic and different from all the other ones :] nice gun. I've shot it once or twice Link to post Share on other sites
trfo2o Posted November 6, 2006 Report Share Posted November 6, 2006 maybe add a crane stock! Link to post Share on other sites
Mr6 Posted November 6, 2006 Report Share Posted November 6, 2006 well..... finally a decent picture. i'd love some +1s <{POST_SNAPBACK}> Keep it as it is. It looks very, 'Blackwater sniper' as it is. Link to post Share on other sites
Magsz Posted November 6, 2006 Report Share Posted November 6, 2006 Bababooey, can you take better pictures of the trademarks on your MRP? Im assuming that is a custom made lower because from what i could see, which is very little mind you, was colt trades. Btw, you arent lemongelo under a different alias are you? Link to post Share on other sites
0nslaught Posted November 6, 2006 Report Share Posted November 6, 2006 maybe add a crane stock! <{POST_SNAPBACK}> make it a real SPR get the G&P SPR grip and a good ol crane stock Link to post Share on other sites
1cem4n Posted November 6, 2006 Report Share Posted November 6, 2006 maybe. i really need the SPR grip. every place keeps running out of stock. Link to post Share on other sites
0nslaught Posted November 6, 2006 Report Share Posted November 6, 2006 here ya go : http://www.wgcshop.com/pcart/shopper.php?i...C-330_cat_Grips Link to post Share on other sites
Recommended Posts