Reincarnation... Posted July 28, 2010 Report Share Posted July 28, 2010 (edited) Nah I dont think so.. It wasn't in his previous pics.. Well that's what it is or similar; Pelican 1500D. Just because it wasn't it in a previous picture, where the foam was removed already for the pack, doesn't mean it isn't was it is, a desiccant silica gel pack. Edited July 28, 2010 by Reincarnation... Quote Link to post Share on other sites
PianoBlack Posted July 28, 2010 Report Share Posted July 28, 2010 It's a a Pelican 1500D Silica Desiccant Pack. My previous picture had the foam removed from the case in anticipation of the 1550D arriving. It makes sense to have something like that in my case as I live in a somewhat humid climate. Â -Piano Quote Link to post Share on other sites
The Vainguard Posted July 28, 2010 Report Share Posted July 28, 2010 Ahhh that's actually cool. When I thought of silica desiccant I thought of those white baggies so I was like, wuh? Quote Link to post Share on other sites
Frykis Posted August 8, 2010 Report Share Posted August 8, 2010 This how I store, my guns.  It's a dubble sided case, from Begadi. The foam is gut in small square shapes, så you just pull them out in the desired pathern.   Im still workin on the transport section since the case is quite large and heavy. Quote Link to post Share on other sites
Kaworu Posted August 8, 2010 Report Share Posted August 8, 2010 Pre-skirmish setup:   Small bag:  Boots ESS Profile and ESS ICE Documents, money and phone DSLR  Big bag:  BDU ALICE kit M4 CQB and AK 47S Magazines for the AEGs Food Pair of Talkabouts Documents related to the AEGs  Nice but very bulky for public transport (bus to the site then train/bus back home)... Need a car, desperately.  See ya! []'s Quote Link to post Share on other sites
PianoBlack Posted August 9, 2010 Report Share Posted August 9, 2010 Looks really mundane, which is probably what you're going for. Nice job! Â -Piano Quote Link to post Share on other sites
Reincarnation... Posted October 7, 2010 Report Share Posted October 7, 2010 (edited) Bring this thread back from death: Â Â Â Left some more for a future light and mount for the AKS74U. Edited October 7, 2010 by Reincarnation... Quote Link to post Share on other sites
[NL]Infinity Posted July 10, 2011 Report Share Posted July 10, 2011 (edited) Necro! Â Â My 1600-series peli, didnt actually buy it myself, as I got it with my pee-tee-dub in a sweet deal. Although it's an eyecatcher and probably THE safety way of transporting your equipment, I actually wouldn't recommend this setup to anyone (especially not to people with a ptw or ICS). Having to assemble disassemble the gun for transport is a pain. Aswell as getting the dirt, gathered in the foam, out of the gearbox. It only fits my CQB only, so when I want to use my m4, I end up using a riflecase of bag cause the upper alone doesnt even fit the case. Edited July 12, 2011 by crackisbad Quote Link to post Share on other sites
shmook Posted July 10, 2011 Report Share Posted July 10, 2011 Also, pelican cases weigh a *bramston pickle* ton when you have to lug them any distance! Quote Link to post Share on other sites
bladerunner Posted August 8, 2011 Report Share Posted August 8, 2011 my new case Quote Link to post Share on other sites
BaggyPants Posted August 8, 2011 Report Share Posted August 8, 2011 Quote Link to post Share on other sites
hitmanNo2 Posted August 8, 2011 Report Share Posted August 8, 2011 Looks sweet. Where did you get the foam from? Quote Link to post Share on other sites
BaggyPants Posted August 8, 2011 Report Share Posted August 8, 2011 Packaging foam from http://www.easyfoam.co.uk Quote Link to post Share on other sites
hitmanNo2 Posted August 8, 2011 Report Share Posted August 8, 2011 Excellent. Thanks. Do you remember the dimensions of the foam you ordered as I'm thinking about picking up one of those cases. Was it one piece for the lid, one piece for the cut out and another for the under layer? Quote Link to post Share on other sites
BaggyPants Posted August 8, 2011 Report Share Posted August 8, 2011 Ordered 3 bits, width 288mm, length 690mm, thickness 40mm. The top piece fits exactly at 40mm deep, but the bottom pieces really should only be 37mm deep each. I just cut 6mm off the whole of the bottom piece though. In hindsight, I would maybe have made the width and length dimensions a couple of mm's bigger for a snugger fit. Quote Link to post Share on other sites
druid799 Posted August 8, 2011 Report Share Posted August 8, 2011 (edited) I've used this site for foam , really good , you can get a quote on line with them as well . http://www.efoam.co.uk/indexm.html Edited August 8, 2011 by druid799 Quote Link to post Share on other sites
akiraspeedstar Posted August 12, 2011 Report Share Posted August 12, 2011 My Plano case, I love how easy the pluck and pull foam is, but damn it doesn't look as nice as cutting it out with a flat sheet of foam. Â Quote Link to post Share on other sites
Pkekyo-Nor Posted August 19, 2011 Report Share Posted August 19, 2011 (edited) Got a Pelican 1200 in today and did a quick 30min cut-job. It's not perfect, but after doing it with just a dull scalpel I feel it's allright for now... Â Edited August 19, 2011 by Pkekyo-Nor Quote Link to post Share on other sites
Cam Mayor Posted September 12, 2011 Report Share Posted September 12, 2011 This is what I came up with when the wife got on my back for gear all over the basement. Â Â Â Â Â Â Quote Link to post Share on other sites
BaggyPants Posted October 4, 2011 Report Share Posted October 4, 2011 Latest case for my TM Glock 17: Â Â Genuine Glock pistol case, with the annoying top foam with cut out slot for paperwork replaced with the foam from the bottom, and new thicker foam made to go in there. With the new foam in the bottom, the pistol and magazines don't move at all in transit. The real steel Glock magazine loaders are perfect for protecting the airsoft Glock magazine outlet valves Quote Link to post Share on other sites
TheFull9 Posted January 10, 2012 Report Share Posted January 10, 2012 At last, somewhere to stick all my stickers: Â Â Â I was going for that old leather guitar case look, you know the kind that some teenager inherited off his dad and it's got lots of dog eared stickers of peace symbols sitting at jaunty angles next to all the new logos of skate boarding brands. Gently transporting a well loved acoustic from place to place. Â Mine of course houses guns and is plastered with hard-right american rhetoric and the logos of brands and companies which produce gear that helps rough guys kill bad people. Currently awaiting the newly released PTS sticker pack to turn up from EBB so I can add some funny propaganda about PMAGs curing various illnesses. Quote Link to post Share on other sites
Ivan le Fou Posted January 10, 2012 Report Share Posted January 10, 2012 Not enough tickers. Â Quote Link to post Share on other sites
TheFull9 Posted January 10, 2012 Report Share Posted January 10, 2012 I know! That's why I've got more on the way. Quote Link to post Share on other sites
Jimmypie Posted January 10, 2012 Report Share Posted January 10, 2012 Ha ha, mine are all over the outside of my "war room" door, like a rebellious teenager Quote Link to post Share on other sites
Ivan le Fou Posted January 10, 2012 Report Share Posted January 10, 2012 I know! That's why I've got more on the way. Â By the way, I really like your ATAC pattern floor. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.