DWells55 Posted April 3, 2008 Report Share Posted April 3, 2008 I talked with Factory today and told how enthustiac (did i spell that right?) people in Europe are Hey man, us Americans are pretty excited too! Anyways, here are a few suggestions for what I would like to see: P90 MP7 TMP M249 HK417 It would be appreciated if these guns were metal wherever the real guns are metal. A lot of us really enjoy the added realism and durability of having our airsoft guns match their real-steel counterparts when it comes to metal construction. Also, accurate trademarks on guns would be GREATLY appreciated. JG tried this with their plastic-bodied HK416 and it was a step in the right direction. Having trademarks engraved into metal bodies would be amazing, just be sure to make them accurate. Link to post Share on other sites
rjrunner Posted April 3, 2008 Report Share Posted April 3, 2008 I'd like them to create a shotgun, preferably a side by side Link to post Share on other sites
TooBigToFit Posted April 3, 2008 Report Share Posted April 3, 2008 I hate to be a gun detail Nazi, but MSG90 has full auto while PSG1 doesn't It could have full auto. Depends on what trigger group is installed. PSG-1 doesn't have a push pin receiver, which means semi only. But the bulge in the barrel at the end is something they better remember, should they make a MSG90. Link to post Share on other sites
trench_raider Posted April 3, 2008 Report Share Posted April 3, 2008 How about a Colt R80 "Monitor"? http://www.smallarmsreview.com/pdf/Monitor.pdf (a little known civillian and police version of the BAR) TR Link to post Share on other sites
Fizzy Posted April 3, 2008 Report Share Posted April 3, 2008 I hate to be a gun detail Nazi, but MSG90 has full auto while PSG1 doesn't You're presuming, of course, that JG will make the PSG1 and it'll be semi only Link to post Share on other sites
Kristoffer Posted April 3, 2008 Report Share Posted April 3, 2008 PKM Link to post Share on other sites
TooBigToFit Posted April 3, 2008 Report Share Posted April 3, 2008 Ah yes, I remember the gun I have forgotten... HK G41. Link to post Share on other sites
choffman10 Posted April 3, 2008 Report Share Posted April 3, 2008 Hmm... I'd like to see a Tavor, and P90; I guess I can't argue against a full metal Uzi too. PKM's are also very sexy, but I can't imagine they would be the easiest build. Link to post Share on other sites
GuzziHero Posted April 3, 2008 Report Share Posted April 3, 2008 YAY! Go PKM! Can I say PKM one more time? If theres a reliable one under £300, Ill be all over that. Link to post Share on other sites
Roanix Posted April 3, 2008 Report Share Posted April 3, 2008 G36 that has the scope w/red dot and bipod g36k p90 Hk21 Link to post Share on other sites
DWells55 Posted April 3, 2008 Report Share Posted April 3, 2008 How about some metal mid-cap magazines? I know I'm not the only person here who doesn't like hi-caps. Some affordable 130 round metal Armalite magazines would be greatly appreciated. Link to post Share on other sites
p.briden Posted April 3, 2008 Report Share Posted April 3, 2008 Yes a clone of the Wa Shan Mad Max in 6mm would be ideal. M60 HK MG4 GPMG HK21E SPAS12 Stryker HK PSG1 Blaser R93 SIG 550 SIG 551 Uzi (AEG) TMP (AEP) PKM Gailil MP44 MG42 M1 Garand Browning 30 cal Browning 50 cal Vickers MG Sten SMG Bren LMG Enfield no.4 Thompson 1928 BAR Smith & Wesson Schofield New Model 3 Revolver Walker Colt Revolver/Colt Dragoon Revolver Colt Single Action Army/Cavalry/Artillery 'Peacemaker' Remington New Model Army Winchester 1894 Rifle Smith & Wesson Volcanic (Pistol) Link to post Share on other sites
Stealthbomber Posted April 3, 2008 Report Share Posted April 3, 2008 I hate to be a gun detail Nazi, but MSG90 has full auto while PSG1 doesn't I hate to be a detail nazi too but THIS disagrees with you. "Modes of fire: Semi" Link to post Share on other sites
SuperSniper Posted April 3, 2008 Report Share Posted April 3, 2008 Sig 556 Sig 550 Sig 551 MSG90 PSG1 UZI and make all your m4 and m16 variants FULL METAL and I will be one happy camper. Link to post Share on other sites
galactica Posted April 3, 2008 Report Share Posted April 3, 2008 can I just do a -1 for all the G36 & K requests? what a WASTE. I love G36s, they are my main weapon, but the ACM kits are just fine for modding a "c". Let's have something different, yet realistic. Link to post Share on other sites
TooBigToFit Posted April 3, 2008 Report Share Posted April 3, 2008 I hate to be a detail nazi too but THIS disagrees with you. "Modes of fire: Semi" Well, the trigger group can be swapped out for FA (I think) since, as HK Pro states, it uses a push pin receiver, but you are correct. So uhhh, MP5/10 series anyone? And as stated by someone before, the G36K/G36 isn't really a waste since the kit + gun is still $$$ (nearing AEG range). Plus, you can't get the STAR red dot/3.5x carry handle from anything but their G36 (although they did sell it seperately for a while). Link to post Share on other sites
Weirdguy Posted April 3, 2008 Report Share Posted April 3, 2008 Well, the trigger group can be swapped out for FA (I think) since, as HK Pro states, it uses a push pin receiver, but you are correct. So uhhh, MP5/10 series anyone? Yeah, it uses the push pin so you can make it full auto, unlinke the PSG1 which could never be full auto in your wildest dreams. Link to post Share on other sites
Steyrkat Posted April 3, 2008 Report Share Posted April 3, 2008 I like the idea of a Sterling. That'd be something difficult to make a mess of. Yes, a Sterling L2A3 would be really nice. I love the sten and perforated heatshield style. My suggestions: Sterling L2A3 Steyr AUG A3 Steyr TMP Enfield SMLE A Calico-style assault rifle would be a pretty unique addition too, although the looks are as controversial as the AUG, you love it or you hate it. Link to post Share on other sites
rolling-thunder Posted April 3, 2008 Report Share Posted April 3, 2008 How about some metal mid-cap magazines? I know I'm not the only person here who doesn't like hi-caps. Some affordable 130 round metal Armalite magazines would be greatly appreciated. Actually i think that is a good idea,make them around about 100 rounds though & i'll be a bit happier! RT Link to post Share on other sites
Fizzy Posted April 4, 2008 Report Share Posted April 4, 2008 and make all your m4 and m16 variants FULL METAL and I will be one happy camper. And as if by magic: http://www.arniesairsoft.co.uk/forums/inde...howtopic=140200 Link to post Share on other sites
crusader4x Posted April 4, 2008 Report Share Posted April 4, 2008 I don't think there are enough Armalite replicas out there. So, a few more M16 & M4 variants please. Seriously, I have to "ditto" quite a few of you: 1. Tavor 2. L85A2/SA80 3. HK SL8 (or a cheaper kit to upgrade to one) 4. Walther WA 2000 (gonna duck and cover now) Link to post Share on other sites
kken Posted April 4, 2008 Report Share Posted April 4, 2008 my jing gong wish list is that they go away FOREVER. Link to post Share on other sites
Sgt.Griff Posted April 4, 2008 Report Share Posted April 4, 2008 No more armalites! seriously isn't there enough choice out there already? and +1 to the SL8, another sexy sniper lol Link to post Share on other sites
solitaire360 Posted April 4, 2008 Report Share Posted April 4, 2008 Well seeing as no one has mentioned the fg42 since I did, I guess that I had best change my vote/s! Sterling L2A3, MP5A1, UMP that actually works and can have its innards changed/modded would be nice, An M4 SMG kit, with cheap aftermarket midcaps - £5 a piece, Thompson 1928 Model - for crying out loud, the airsoft community has been dying for one of these for 10+ years! That is all, for now. Link to post Share on other sites
Shinden Posted April 4, 2008 Report Share Posted April 4, 2008 After reading all 10 pages, I am fully convinced that there is a chance that many who asked for a particular gun would also be open to dissapointment as they may complain about the build/quality and accuracy to the real guns. Jing Gong are a better company among all other Chinese based companies making copies, however there will be people who will still complain that it is still a chinese company, no trademarks, and etc. Best of all, the most feasible model that JG can do (given they have shown interests in Conversion kits) , is the MSG90, PSG1 series. JG is expanding on the G3 series therefore those two guns are the most highly possible production models. The rest like the UZI will be slightly a 50/50. Most of the newer guns like the FN2000, PDR, Tavor, etc will likely be not made until another company produces a model and JG utilizes it. However JG still does not have an original gun made, so until then they will most likely reside in producing an already existing model. Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.