TDS Posted July 29, 2009 Report Share Posted July 29, 2009 I don't believe that part was ever ment to be /easily/ adjustable, just so that you can tune your gun to your fields specific FPS limits. If it was any more "practical " I'd be working on banning or reducing its use at my field because players can't handle easily adjustable fps, period. Quote Link to post Share on other sites
rvp69 Posted July 29, 2009 Report Share Posted July 29, 2009 i have no issues with mine?it locks fine.. Quote Link to post Share on other sites
L4byr1nth Posted July 29, 2009 Report Share Posted July 29, 2009 Anyone know of the best way of making/fitting an adjustable nozzle to my V.3 M16A3? Ben. Quote Link to post Share on other sites
newcomer Posted July 29, 2009 Report Share Posted July 29, 2009 This problem seems to have zero to do with the 'cooldown of steel' as some had thought. Its the same as brass. In fact, after tinkering, brass seems more reactive to cold then steel. The only thing the steel nozzles are good for are the steel floating valves inside - the brass valves would all break in a matter of time. You're right. Although brass has a higher thermal coefficient of expansion that steel, it really is minute or insignificant. I did a calculation on a brass barrel at freezing point and the difference was in the range of microns, or less. Quote Link to post Share on other sites
Marky [UE] Posted July 29, 2009 Report Share Posted July 29, 2009 Quick update: my semi/auto burst issue is still not fixed and I still have no idea as to the cause. Thanks go to those who have tried to help so far. I have reassembled my entire gun so many times I lost count and nothing appears worn, in the wrong place or stuck/sticking. I get a consistent 28/29 shots from a single CO2 bulb and my chrono tests have been very inconsistent. I would really like someone to confirm the correct assembly of the trigger parts and where/how the springs should be placed when reassembling the unit. A clutching at straws theory but if the hammer spring was strong enough it could stop the bolt from completing a full cycle and hence cause a similar burst effect. This might also cause more gas to be used as the trigger might not fully reset causing the mag to be in a release state for longer than normal. Quote Link to post Share on other sites
Cephas Posted July 29, 2009 Report Share Posted July 29, 2009 TDS, Your statement regarding practicality makes no sense. Airsoft is a game of honor, if people want to cheat they will cheat no matter what you do. Systems rifles have quick change cylinders, escort guns have regulators, many new aegs have gearboxes that allow the spring to be taken out without dismantlng the entire assembly, and then you have the RATech npas system for the WA system which I hope they develop one for the WE. When I say practical, I expect it to work as advertised, which this doesn't. It must be have an ease of use, even at home with correct tools it was a challenge to get it to work corectly consistenly. So I'm seeking something more practical in those terms. Quote Link to post Share on other sites
Nazio Posted July 29, 2009 Report Share Posted July 29, 2009 (edited) Last milsim i have damaged butt stock of my M4. Can anybody confirm if this would fit ? http://shop.ehobbyasia.com/accessories/sto...tock-black.html Edited July 29, 2009 by Nazio Quote Link to post Share on other sites
kojak Posted July 29, 2009 Report Share Posted July 29, 2009 Last milsim i have damaged butt stock of my M4. Can anybody confirm if this would fit ? http://shop.ehobbyasia.com/accessories/sto...tock-black.html Yes, I have it on mine and it fits very well. Not 100% wobble free like the $100 locking version, but much better than the stock stock. FYI you can use any mil-spec "real steel" stock, or any airsoft stock that does not replace the buffer tube. Quote Link to post Share on other sites
BrooklynBorn Posted July 29, 2009 Report Share Posted July 29, 2009 Where did 30-some pages go?? Quote Link to post Share on other sites
rottenotto Posted July 30, 2009 Report Share Posted July 30, 2009 Going to try sealing my mags as some leak - is it this stuf you use (UK equivalent) http://www.halfords.com/webapp/wcs/stores/...yId_165691#dtab ?? Also, Otto, did you have to do anything to your v2 hop rubber to stop it from over hoping? I bought the barrel and rubbers a couple of months back but have not yet fitted them as most people I know who did have overhop problems. Nope, never needed to "mod" it......but you DO have to select a good rubber. They are VERY inconsistent. I wrote about this here on the forum way back when they were first released (picking out a good rubber bucking). I really need to add a post at the WIKI site.......basically showing the inconsistencies in them and picking out the best bucking; One that just peaks through the inner barrel and no more. I have been so busy with work though - summer is my busy season. The gen2 hop up rubbers are NOT all the same and was the reason for WILDLY different reviews as for its performance. (Typical WE quality control - lackadaisical.) If you pick the right one out of a handful of green rubbers/sleeves, you will have near laser beam accurate shots with excellent consistency. If you pick a wrong one, the results are poor. Quote Link to post Share on other sites
A Tobias Posted July 30, 2009 Report Share Posted July 30, 2009 last time i checked this topic had 307 pages..what happened? Quote Link to post Share on other sites
elrey Posted July 30, 2009 Report Share Posted July 30, 2009 Where did 30-some pages go?? last time i checked this topic had 307 pages..what happened? Cazboab deleted 30-odd pages of posts which were made before the rifle was released, so that anyone who endeavors to read through the topic from the beginning won't have to deal with 600 posts of "Wow, this looks sweet, can't wait, somebody review it", etc. Quote Link to post Share on other sites
Eliminator Posted July 31, 2009 Report Share Posted July 31, 2009 Do anybody else have trouble with the Scar? There are 5 guys on the French Forum who have a breack on the back of their part#64 Quote Link to post Share on other sites
somegirls Posted July 31, 2009 Report Share Posted July 31, 2009 Dunno, this is the M4 thread. Quote Link to post Share on other sites
Eliminator Posted July 31, 2009 Report Share Posted July 31, 2009 (edited) There's a Scar thread? Edit: Found it Edited July 31, 2009 by Eliminator Quote Link to post Share on other sites
chris u'5 Posted July 31, 2009 Report Share Posted July 31, 2009 Several now. Quote Link to post Share on other sites
alston251 Posted August 1, 2009 Report Share Posted August 1, 2009 (edited) Um... I just came back from a trip to Thailand and i found my M4 somewhat rusty on some bits. Like the flashhider, takedown pins and the handguard thinge. Is that suppose to happen. It is indeed very very humid in Hong Kong. And i still can't pull out the whole brass tube, hop up and inner barrel assembly. Edited August 1, 2009 by alston251 Quote Link to post Share on other sites
chris u'5 Posted August 1, 2009 Report Share Posted August 1, 2009 @alston Have a read of this mate. http://www.gasguns.info/forum/viewtopic.php?f=7&t=367 In regards to the 'rust' unfortunately this seems to be fairly common. A problem caused by WE and their 'amazing' anodizing process Quote Link to post Share on other sites
somegirls Posted August 1, 2009 Report Share Posted August 1, 2009 really? Good I got a Ver.1 Body Quote Link to post Share on other sites
L4byr1nth Posted August 1, 2009 Report Share Posted August 1, 2009 (edited) My V3. M16A3 has no rust And it's anodised Ben. Edited August 1, 2009 by L4byr1nth Quote Link to post Share on other sites
alston251 Posted August 1, 2009 Report Share Posted August 1, 2009 Well the body and all the anodized stuff has no rust just the little bits that's quite important you see? Anyways, there's something more important. I today tried to lower the FPS of my M4 by attempting to put a 7mm bushing in. But i have heated the nozzle countless times and it just doesn't come off. The worst news is that i have scratched the rod so badly that the action isn't really smooth. But firing it is fine. It's just my perfectionist mind affecting me. Can i get a replacement anyhow? And how are you meant to properly take apart the nozzle assembly?? Quote Link to post Share on other sites
kimkafwan Posted August 1, 2009 Report Share Posted August 1, 2009 Well the body and all the anodized stuff has no rust just the little bits that's quite important you see? Anyways, there's something more important. I today tried to lower the FPS of my M4 by attempting to put a 7mm bushing in. But i have heated the nozzle countless times and it just doesn't come off. The worst news is that i have scratched the rod so badly that the action isn't really smooth. But firing it is fine. It's just my perfectionist mind affecting me. Can i get a replacement anyhow? And how are you meant to properly take apart the nozzle assembly?? . spare: http://www.airsoftbuddy.com/index_eproduct...products_id=191 . i'm using a torch lighter. Quote Link to post Share on other sites
alston251 Posted August 1, 2009 Report Share Posted August 1, 2009 Oh yay! thanks. How do i take the nozzle assembly apart to change into new parts now? Quote Link to post Share on other sites
Carsten Posted August 1, 2009 Report Share Posted August 1, 2009 meh, airsoft123, /me want the LaRue receiver,.. can you estimate when it will be available? What about the price.. are there any news? thx Quote Link to post Share on other sites
Major Dutch Schaeffer Posted August 1, 2009 Report Share Posted August 1, 2009 They said its coming in a week, but said the same thing to me in an email two weeks ago... Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.