Guest Posted July 18, 2010 Report Share Posted July 18, 2010 That looks pretty awesome, nice and clean setup! Don't go too heavy on the paintjob and that will look sweet once it's worn in Link to post Share on other sites
blink me Posted July 20, 2010 Report Share Posted July 20, 2010 Its taken a long time to get something which looks so simple... Cheers Link to post Share on other sites
Rogue845 Posted July 20, 2010 Report Share Posted July 20, 2010 Just put this together, again mostly out of spares: Link to post Share on other sites
aznriptide859 Posted July 21, 2010 Report Share Posted July 21, 2010 Finally got a damn bipod... Link to post Share on other sites
BrooklynBorn Posted July 21, 2010 Report Share Posted July 21, 2010 That RECCE looks so odd right now... Link to post Share on other sites
aznriptide859 Posted July 21, 2010 Report Share Posted July 21, 2010 Is it because of the stock? Link to post Share on other sites
Scuffer Posted July 21, 2010 Report Share Posted July 21, 2010 Is it because of the stock? Yer and the PEQ, it's early plain and sleek look was better imho. Link to post Share on other sites
spetsnazdave87 Posted July 21, 2010 Report Share Posted July 21, 2010 Updated piccies of my carbine in natural light with Guarder M2 aimpoint, correct mount and carry handle rail. Switched the taclight wiring around as well, less snaggy now. Link to post Share on other sites
StarMonkee Posted July 21, 2010 Report Share Posted July 21, 2010 Finally finished my backup gun Probably going to change the buis for a full carry handle. Basic pic till I can get outside to get a proper pic without being hassled Link to post Share on other sites
BrooklynBorn Posted July 21, 2010 Report Share Posted July 21, 2010 Yer and the PEQ, it's early plain and sleek look was better imho. That. Maybe if you paint the PEQ to an FDE, and move it back, and definitely get that ACS stock, it'll look amazing Link to post Share on other sites
Eizen Posted July 23, 2010 Report Share Posted July 23, 2010 My second M4, this time Pararescue-ish. Waiting for a BFG Medic sling for it. Also needs a paintjob.. Link to post Share on other sites
some_guy22 Posted July 23, 2010 Report Share Posted July 23, 2010 Not the world's greatest photographer.... Link to post Share on other sites
Ion Posted July 23, 2010 Report Share Posted July 23, 2010 That looks really, really, really familiar. Thats Kow's WOC huh? And it looks great as always. Link to post Share on other sites
boomheadshot (infidel) Posted July 23, 2010 Report Share Posted July 23, 2010 Is that rust??? Link to post Share on other sites
some_guy22 Posted July 23, 2010 Report Share Posted July 23, 2010 Yes, Ion, it was Kows'.... Finally got some time at home to throw it together after being trapped at the hospital. And no, it's not rust, for some reason just colored like that, perhaps someone who understands metal more than I do can explain. Link to post Share on other sites
UrPeaceKeeper Posted July 24, 2010 Report Share Posted July 24, 2010 The G&P M16A4 WOC Still has not been used in the field by me, but she is upgraded-ish: G&P Burst Trigger Kit G&P Anti Rotation Links JDT 6.03 509mm Tightbore AABB "Hardy" buffer spring Everything else is Stock G&P WOC BCG #1: Element Steel Bolt Carrier (Small Weight Reduction) AABB Plastic Nozzle with Aluminum Tip 5KU NPAS -Still doesn't work BCG #2: AABB Bolt Carrier AABB Plastic Nozzle with Aluminum Tip -Positive Pressure system using G&P's stock nozzle components, it cycles, better than the NPAS does. Externals: Dboys M5 Rail Unit ACM TA31 ACM KillFlash Ergo-Grip Vert Grip Link to post Share on other sites
davedawg123 Posted July 24, 2010 Report Share Posted July 24, 2010 Great taste. Alas, mine is the AEG version of that. Link to post Share on other sites
judgeman Posted July 24, 2010 Report Share Posted July 24, 2010 This was Cancel's Garry Gordon job at one point. Now, not so much =3 G&P MBK G&P flashider G&P mount and Aimpoint CA M733 front end ACM stock Surefire mount & Flashlight Systema M16 tightbore Systema hop bucking Systema Hopup Matrix 7mm GB Systema Torque Up Gears (2/3 I believe the sector is still CA) TM Cylinder/Cylinder head CA Purple/Blue air nozzle Systema M130 spring G&P White Polycarb Piston / CA Piston head CA AV Latch G&P Switch Assembly on CA wiring to front in hand guard CA Metal Spring Guide ...and a partridge in a pear tree Link to post Share on other sites
Eizen Posted July 25, 2010 Report Share Posted July 25, 2010 More in painted weapons topic. Link to post Share on other sites
boomheadshot (infidel) Posted July 25, 2010 Report Share Posted July 25, 2010 WIP C8 SFW Still needs alot of work :/ Going to change to lipos in the tube and my Guarder C8 receiver is on its way Link to post Share on other sites
Robinio Posted July 26, 2010 Report Share Posted July 26, 2010 Hello guys, a quick question, since I'm gonna need a base gun for my project, I figured, I will have my battery in the stock tube, now, would this Battery fit inside this gun stock tube Thanks, otherwise, could someone link the a battery that would fit... and no I dont wanna use the crane stock type battery. Link to post Share on other sites
boomheadshot (infidel) Posted July 26, 2010 Report Share Posted July 26, 2010 Yes but you wouldn't be able to fully collapse the stock, a 800 MaH would mean you wouldn't have this problem Link to post Share on other sites
kojak Posted July 27, 2010 Report Share Posted July 27, 2010 My mountain patrol rifle: Link to post Share on other sites
aznriptide859 Posted July 27, 2010 Report Share Posted July 27, 2010 Is that a CASV-EL? Nice Link to post Share on other sites
Robinio Posted July 27, 2010 Report Share Posted July 27, 2010 Yes but you wouldn't be able to fully collapse the stock, a 800 MaH would mean you wouldn't have this problem some thing like this battery? Link to post Share on other sites
Recommended Posts