quiksilver6184 Posted April 9, 2007 Report Share Posted April 9, 2007 I am having a little trouble fellas. I bought a shooters design slide and barrel for my USPc and tore the hop up rubber while trying to instal it. Do you guys know of any online stores that have the hop up rubber in stock. Everywhere I look its out of stock. Anyone? Quote Link to post Share on other sites
quiksilver6184 Posted April 9, 2007 Report Share Posted April 9, 2007 Sorry to double post guys, but I need a little more help. Could someone with both the USP fullsize and the USPc compare the front sights please. I need to know if they are compatable. The shooters design slide does not come with the front sight, and I cant seem to get the sight off of the factory slide, so I guess I am going to have to buy a new sight. The only ones I can find are for the full size. I need to know if they are compatable. Thanks again, and +1 to the person that helps me out. Quote Link to post Share on other sites
0nslaught Posted April 9, 2007 Report Share Posted April 9, 2007 You just need to put a little force into it, get like pin or a hex key, press onto the side of the front side, and push. It will come out, trust me. I had to do this with my USP as well. Just find something to push it with. Quote Link to post Share on other sites
lightprocess Posted April 10, 2007 Report Share Posted April 10, 2007 I suggest using a chopstick and a mallet- tough enough and won't risk scratching the finish. Just tap it out in small, firm strokes and the sight should pop out. Good luck fitting it in the SD slide. Quote Link to post Share on other sites
PILMAN Posted April 10, 2007 Report Share Posted April 10, 2007 It ain't airsoft but it is from the movie blood diamond, plenty of eye candy with all the USP's the South Afrikkans and Archer were carrying Quote Link to post Share on other sites
PILMAN Posted April 10, 2007 Report Share Posted April 10, 2007 Quote Link to post Share on other sites
0nslaught Posted April 10, 2007 Report Share Posted April 10, 2007 Also in Casino Royale, when bond and that african spiderman guy are on the crane, the african spiderman guy had a USPc Quote Link to post Share on other sites
BARsrule2 Posted April 10, 2007 Report Share Posted April 10, 2007 Collateral anyone? Quote Link to post Share on other sites
afallan Posted April 10, 2007 Report Share Posted April 10, 2007 I was wondering does anyone else's slide not lock back, when they are out of ammo? I recently added a metal slide and upgraded recoil spring to my USP (ksc compact and full size), but they don't lock back like they used to do. afallan Quote Link to post Share on other sites
AliceHKfan Posted April 10, 2007 Report Share Posted April 10, 2007 Also in Casino Royale, when bond and that african spiderman guy are on the crane, the african spiderman guy had a USPc <{POST_SNAPBACK}> not USPC its full size I think and if you take a look at the last picture of Di Caprio, its a USPC with a bobbed hammer Quote Link to post Share on other sites
0nslaught Posted April 10, 2007 Report Share Posted April 10, 2007 not USPC its full size I think and if you take a look at the last picture of Di Caprio, its a USPC with a bobbed hammer <{POST_SNAPBACK}> No trust me its a USPc, i have casino royale on bluray. i watch it alot on my ps3. Quote Link to post Share on other sites
kinau Posted April 10, 2007 Report Share Posted April 10, 2007 Shooters Design slide Kin Quote Link to post Share on other sites
willnyc Posted April 10, 2007 Report Share Posted April 10, 2007 How does the slide cycle with the G&G threaded barrel? Quote Link to post Share on other sites
PILMAN Posted April 10, 2007 Report Share Posted April 10, 2007 not USPC its full size I think and if you take a look at the last picture of Di Caprio, its a USPC with a bobbed hammer <{POST_SNAPBACK}> It's hard to tell due to the magazine plate but it does kinda look like a compact like you mentioned, all the south afrikan mercenarys however are carrying what appear to be full size USP's (which the black kid picks up after they are shot) however it doesn't make sense that if Dicaprio was able to swap magazines from his compact with a fullsize USP, I didn't think they were interchangeable? Quote Link to post Share on other sites
0nslaught Posted April 10, 2007 Report Share Posted April 10, 2007 kinau what threaded barrel are you using? is it nice? cycle properly? Quote Link to post Share on other sites
AliceHKfan Posted April 10, 2007 Report Share Posted April 10, 2007 they aren't in those pictures its hard to tell since it looks like the length and trigger guards aren't consistant Quote Link to post Share on other sites
pedrosalas7 Posted April 11, 2007 Report Share Posted April 11, 2007 they are full size USPs, you can tell in some pics but not in others, but that's because the picture ratio is all messed up. just look at the heads on the people on the pics that are hard to tell (unless it's the pics where you just have a front view of the gun). -Pedro Salas. Quote Link to post Share on other sites
PenGun Posted April 11, 2007 Report Share Posted April 11, 2007 You can always just look at the trigger guard...a full-size USP has an straight "angled" trigger guard while the Compacts all have "hook" ones for your support index finger. Not all Compacts have bobbed hammers, usually the DAO versions have it as standard, but then they'd have no need for a control lever... Also there are different mag baseplates depending on the market etc. You can get a few different types: flat, shelf-type, jet-funnel (Elites). And if the pic is clear enough it should read "Compact" on the slide Now if anyone could get hold of an airsoft USP45 Compact Tactical, I'd be impressed... Quote Link to post Share on other sites
kinau Posted April 11, 2007 Report Share Posted April 11, 2007 How does the slide cycle with the G&G threaded barrel? <{POST_SNAPBACK}> kinau what threaded barrel are you using? is it nice? cycle properly? <{POST_SNAPBACK}> It's a G&G barrel. Nice? Yeh, it's not SD-quality, but then I didn't expect it to be. Plus, I have no other choice if I want a 'silenced' USPc. Cycle properly? Erm... not yet - I haven't bothered sanding the slide or barrel. I will do it. Soon. I've noticed the weight of a silencer does mess with the cycling a bit though. Kin Quote Link to post Share on other sites
0nslaught Posted April 12, 2007 Report Share Posted April 12, 2007 hum, as expected. the G&G G19 threaded barrel has this same problem. Oh well, i was leaning more toward an mk23 anyways. Quote Link to post Share on other sites
PILMAN Posted April 13, 2007 Report Share Posted April 13, 2007 You can always just look at the trigger guard...a full-size USP has an straight "angled" trigger guard while the Compacts all have "hook" ones for your support index finger. Not all Compacts have bobbed hammers, usually the DAO versions have it as standard, but then they'd have no need for a control lever... Also there are different mag baseplates depending on the market etc. You can get a few different types: flat, shelf-type, jet-funnel (Elites). And if the pic is clear enough it should read "Compact" on the slide Now if anyone could get hold of an airsoft USP45 Compact Tactical, I'd be impressed... <{POST_SNAPBACK}> Heres the real fullsize USP, dunno if this helps to compare the trigger guard or not Quote Link to post Share on other sites
willnyc Posted April 13, 2007 Report Share Posted April 13, 2007 Cycle properly? Erm... not yet - I haven't bothered sanding the slide or barrel. I will do it. Soon. I've noticed the weight of a silencer does mess with the cycling a bit though. Kin <{POST_SNAPBACK}> Are you using it with the G&G slide or SD? Because I have an SD and I was wondering if the G&G threaded barrel has an issues working in combination with a SD slide Quote Link to post Share on other sites
Bangla_Black Posted April 14, 2007 Report Share Posted April 14, 2007 pic request: USPc with M6. thanks. +1 will be given! Quote Link to post Share on other sites
j3T Posted April 14, 2007 Report Share Posted April 14, 2007 It's an M6x but hey, that's like practically the same If you're thinking about doing this, I wouldn't suggest it. The M6x sticks out quite a bit, so you'd be better of with an Insight X2. Quote Link to post Share on other sites
tome Posted April 14, 2007 Report Share Posted April 14, 2007 jumping on the M6 bandwagon with my star replica Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.