chaoslord800 Posted August 16, 2009 Report Share Posted August 16, 2009 Finally got it on there guys... thanks for the help! Link to post Share on other sites
Seraphim989 Posted August 16, 2009 Report Share Posted August 16, 2009 I gotta admit, I'm starting to dig the G3Ks... Link to post Share on other sites
Ion Posted August 16, 2009 Report Share Posted August 16, 2009 (edited) I gotta admit, I'm starting to dig the G3Ks... Its always been one of my favorites with a G3. Lookin' good. I need to pick up a CA one. Edited August 16, 2009 by Ion Link to post Share on other sites
Lon Posted August 17, 2009 Report Share Posted August 17, 2009 My G3! Started off as a TM G3SG1. I just recently installed a CA metal receiver on it... I still need to replace the cocking tube though, as it's just the stock tube painted black for now. Still looks pretty metallic from far away, don't it? I put on a TM PSG1 stock that I luckily got my hands on, as well as a G&G RIS + armor style rail covers. I also sawed off the front sight for a smoother look... right in front of that is a Guarder 3-lug thread adapter and a 300mm Deep Fire silencer. I originally wanted a regular thread adapter for a sleeker look, but oh well, I'm pretty satisfied with how everything looks now Future upgrades include a CA metal cocking tube and PDI barrel stabilizer for good measure, as well as one of those new PDI G3 extended mag releases. I've also got a TM PSG1 trigger tab + MP5 trigger that I've yet to install. Link to post Share on other sites
Warning Posted August 17, 2009 Report Share Posted August 17, 2009 lovely lovely G3, btw what sight unit is that? since it suits it to the dot Link to post Share on other sites
Azulsky Posted August 18, 2009 Report Share Posted August 18, 2009 Looks like a Moji scope Link to post Share on other sites
Beefman Posted August 30, 2009 Report Share Posted August 30, 2009 Lon, is that a mojji clone? like the ebaybanned one? what paint did you use to repaint the front sight? this is one of the hottest guns that i've seen for a long time. Link to post Share on other sites
Kingmob3 Posted August 30, 2009 Report Share Posted August 30, 2009 Lon use (AFIK) 5/8" Alu rod stock, it should fit perfectly. I'll measure the back bone in my JAC powered G3 when I get back from campus. KM Link to post Share on other sites
average Posted September 1, 2009 Report Share Posted September 1, 2009 New purchase today: JG T3-K1 (G3-SG1) Link to post Share on other sites
Marginal Posted September 1, 2009 Report Share Posted September 1, 2009 Too bad those JG are not full metal already. Fortunately, if you want to upgrade to a CA metal body, it's not the most expensive. I'm getting a CA G3/SG-1 (or should I say, SAR Taktik Rifle II ) in a same fashion but with the cheekrest and a higher mounted scope. Besides, didn't you mount the scope rail backwards? If I'm not mistaken, that hole on the side that we can see on the pic goes on the opposite side, up the ejection port. Link to post Share on other sites
The Taurus Posted September 1, 2009 Report Share Posted September 1, 2009 If I'm not mistaken, that hole on the side that we can see on the pic goes on the opposite side, up the ejection port. Nah, It is in fact installed correctly. That hole is for if the mount if it were to be used on an MP5 (you would turn it around so it matched up with the ejection port.) The mount has a similar section missing on the other side to accommodate the G3's ejection port. I have one on my CA SAR and I reckon it’s the best low profile mount out there!! Link to post Share on other sites
Lon Posted September 1, 2009 Report Share Posted September 1, 2009 Thanks guys. Yeah, the scope is a Vector Optics Mojji clone, similar to the one on eBaybanned. It's a good scope with a few interesting features... illuminated blue crosshairs, built-in red laser on the side. Maybe I should write a review? Beefman, I used NAPA spraypaint for the front sight and cocking tube. Pretty generic stuff, but it's pretty good for a general flat black. I was also finally able to get my hands on some Krylon flat clear coat to seal it off Thanks kingmob, but no need I was finally able to get my hands on a PDI barrel stabilizer, along with that new HK mag release (makes removing a PSG1 mag a lot easier). Hope the barrel stabilizer isn't a PITA to install. Link to post Share on other sites
Marginal Posted September 1, 2009 Report Share Posted September 1, 2009 Nah, It is in fact installed correctly. That hole is for if the mount if it were to be used on an MP5 (you would turn it around so it matched up with the ejection port.) The mount has a similar section missing on the other side to accommodate the G3's ejection port. I have one on my CA SAR and I reckon it's the best low profile mount out there!! Right you are. I just received mine today and tried to install it on my CA33K. It's the one by ICS with the detachable part. Makes your rail higher in case you have a cheekrest. Too bad I need longer screws to install it, I don't recall having that problem with the Guarder rail but it's out of stock almost everywhere. Link to post Share on other sites
Lon Posted September 2, 2009 Report Share Posted September 2, 2009 ...I reckon it’s the best low profile mount out there!! Yeah... I'm also thinking of getting one for my MP5. It raises high enough so that even an Aimpoint can clear the front sight. Link to post Share on other sites
Imperator Posted September 8, 2009 Report Share Posted September 8, 2009 Yey got all my PDI parts in last night and this morning(pdi photo below) First issue seems to be that there is a discrepancy of size about that of a human hair causing the chamber block to not allow the out barrel to slide in. In favor of sweating it on im going to try to remove just a bit of material with sandpaper. then its off with the dremel tool to put it all together, a bit of cutting and sanding to do! Azulsky, where did you get the chamber block from? I got tired of looking around, since it seems to be out of stock everywhere... And as far as I could tell, PDI had it discontinued... Link to post Share on other sites
Azulsky Posted September 9, 2009 Report Share Posted September 9, 2009 (edited) I got mine from redwolf Still working on it lol i have so far succesfully gotten the block to sit in the right side of the reciever(but the left threaded needs to be shaved for clearance) and i have the cocking tube notched for the chamber block My CA metal body on my MC51 is like an angel sent from heaven The one i am working on is one mean SOB and parts are off by like 1/2 mm and i am taking my time dremeling and sanding it back to health, damn screws wont fit in the cocking tube, etc, etc Still at a standstill for how to get the barrel into the chamber block, i have 2 dremel bits i found that look like they will work to take off the ridiculously small amount of material needed Also the chamber block does not like the screws that were previously in the two "tangs" or forks that were cut off/broken off, but its already threaded for something, have to figure it out, dont want to give up now lol Would have saved alot of time if i would have gotten the G&G reciever from redwolf like i was planning but i couldnt throw the current receiver away. Edited September 9, 2009 by Azulsky Link to post Share on other sites
Imperator Posted September 9, 2009 Report Share Posted September 9, 2009 @ Azulsky Thanks for the info! CA G3 recievers are a piece of work... I have a TM with ABS reciever still, but I had two CA's passing through my hands for some mods, and I hated that metalish league they'r made off. And they don't have half as much detail a TM receiver has! Nontheless, good work! Don't forget to show the results when it's done! Cheers! Link to post Share on other sites
pjones Posted September 13, 2009 Report Share Posted September 13, 2009 This really makes me want a G3A4, or whatever the designation is for the skinny handguard sliding stock version is. Question: How difficult is the stick battery conversion? I'd be using one of the JG T-3's, so the receiver is plastic, correct? Link to post Share on other sites
Seraphim989 Posted September 13, 2009 Report Share Posted September 13, 2009 Yes it is Link to post Share on other sites
Bostitch Posted September 15, 2009 Report Share Posted September 15, 2009 Link to post Share on other sites
Grey_Fox Posted September 15, 2009 Report Share Posted September 15, 2009 Can someone post a pic with a G3A4 with RIS and M203? Please? Link to post Share on other sites
H.U.N.K Posted September 15, 2009 Report Share Posted September 15, 2009 My first ever AEG... I saved up for yonks with my first job for that thing years ago till I sold it on. Almost have a sentimental attachement to it Link to post Share on other sites
Marginal Posted September 15, 2009 Report Share Posted September 15, 2009 Can someone confirm if a G3/SG-1 bipod can be fitted on the CA33 handguard? I believe it is the same attachment at the front but just want to be sure before ordering one. Link to post Share on other sites
zard Posted September 15, 2009 Report Share Posted September 15, 2009 Can someone post a pic with a G3A4 with RIS and M203? Please? Seconded. Link to post Share on other sites
Imperator Posted September 16, 2009 Report Share Posted September 16, 2009 Can someone confirm if a G3/SG-1 bipod can be fitted on the CA33 handguard? I believe it is the same attachment at the front but just want to be sure before ordering one. Yap! it can! Link to post Share on other sites
Recommended Posts