k_h Posted January 17, 2011 Report Share Posted January 17, 2011 what is the barrel and silencer for the g spec and where did you get it? thanks Stock barrel with gspec suppressor under pvc tubing. Barrel and suppressor wrapped in camo tape to make up for snug fit. Don't know if the tight fit helped make it quoted, but it is quieter than without. Quote Link to post Share on other sites
k_h Posted January 17, 2011 Report Share Posted January 17, 2011 what is the barrel and silencer for the g spec and where did you get it? thanks http://m.flickr.com/photos/54464563@N07/5325961440/ Quote Link to post Share on other sites
Horsem4n Posted January 17, 2011 Report Share Posted January 17, 2011 thats a cool solution i'm going to do that to my next sniper rifle build. Quote Link to post Share on other sites
whiteknight Posted January 17, 2011 Report Share Posted January 17, 2011 thanks Quote Link to post Share on other sites
jimmiroquai Posted January 18, 2011 Report Share Posted January 18, 2011 (edited) Grandaddy of suppressed guns... VSR10 based DeLisle Carbine: Edited January 18, 2011 by jimmiroquai 3 Quote Link to post Share on other sites
BigAl Posted January 18, 2011 Report Share Posted January 18, 2011 Nice. Quote Link to post Share on other sites
Rob15 Posted January 20, 2011 Report Share Posted January 20, 2011 Not the best photo ever but I thought I'd dig one of my SD3s out and start sorting it out ready for weekenders Quote Link to post Share on other sites
bladeofdeath3 Posted January 21, 2011 Report Share Posted January 21, 2011 Hicapa race gun And now for something completely different... Quote Link to post Share on other sites
Gaijin Posted January 21, 2011 Report Share Posted January 21, 2011 Blimey thats a big silencer! Quote Link to post Share on other sites
GrimGram Posted January 21, 2011 Report Share Posted January 21, 2011 Grandaddy of suppressed guns... VSR10 based DeLisle Carbine: SNIPPY SNIPPY Oh my... Any more pictures of it, WIP maybe? Quote Link to post Share on other sites
Ivan le Fou Posted January 21, 2011 Report Share Posted January 21, 2011 Quote Link to post Share on other sites
BigEd Posted March 2, 2011 Report Share Posted March 2, 2011 Made one for the grease gun I made. ///ed/// Quote Link to post Share on other sites
lightemup99 Posted March 3, 2011 Report Share Posted March 3, 2011 (edited) Edited March 3, 2011 by lightemup99 1 Quote Link to post Share on other sites
FHairsoft1 Posted March 3, 2011 Report Share Posted March 3, 2011 Made one for the grease gun I made. ///ed/// Do you have any better lit pics? From what I can see that is awesome! Quote Link to post Share on other sites
calbur20 Posted March 4, 2011 Report Share Posted March 4, 2011 All you need is a red dot, and it'll look just like this: Quote Link to post Share on other sites
BigEd Posted March 5, 2011 Report Share Posted March 5, 2011 @ FHAirsoft1, I am terrible at taking pictures... I just finished an A1 stock for it. @ Calbur20, Nice! Is that a Hudson or a conversion? (Mine was an AGM MP40, and scratch built the body for it.) ///ed/// Quote Link to post Share on other sites
calbur20 Posted March 5, 2011 Report Share Posted March 5, 2011 Nah, the picture I posted is real steel. The Greaseguns were reissued to our Navy personnel and fitted with integral silencers to fill a gap in our forces' requirements. The conversion was cheap, fast and decently successful. You can read more about it here. There's also a video in that page that shows the thing shooting. Quote Link to post Share on other sites
FHairsoft1 Posted March 7, 2011 Report Share Posted March 7, 2011 Most excellent there BigEd! Really like seeing custom work like that on guns just made a wood grip for my TM clone tri barrel shotty. Kinda like the one in The Book of Eli. Quote Link to post Share on other sites
Whitehawk Posted March 8, 2011 Report Share Posted March 8, 2011 Also found at AK thread. Quote Link to post Share on other sites
vergerdaf Posted March 8, 2011 Report Share Posted March 8, 2011 Newly received carbon fibre can from Lees Precision Engineering Excuse me not to sound silly here but where can I buy one of those suppressors? because surely if it's carbon fibre it would be light enough to allow my stock Tm glock to still cycle fine. Quote Link to post Share on other sites
StarMonkee Posted March 8, 2011 Report Share Posted March 8, 2011 I received it as a sample to review from the help owner of http://www.leesprecision.com/ Am still going through the testing phases but everything is going fine. Quote Link to post Share on other sites
vergerdaf Posted March 8, 2011 Report Share Posted March 8, 2011 (edited) I received it as a sample to review from the help owner of http://www.leesprecision.com/ Am still going through the testing phases but everything is going fine. Cheers mate, was thinking about making lightweight carbon fibre suppressors for glocks, but wouldn't want to even think stealing this guys thunder, it's nice to see some stuff being made in england BTW what barrel did you use?? Edited March 8, 2011 by vergerdaf Quote Link to post Share on other sites
StarMonkee Posted March 8, 2011 Report Share Posted March 8, 2011 I have a shooters design -14mm threaded barrel Quote Link to post Share on other sites
DangerWerx Posted March 8, 2011 Report Share Posted March 8, 2011 Here is my Sexy KWA MP9 Quote Link to post Share on other sites
DangerWerx Posted March 8, 2011 Report Share Posted March 8, 2011 Hate to Double Post, but I just made another Threaded Barrel, This time for something a little more old-school... I removed the previous Barrel cap, Machined a new plug, and got to put my new threading tool to use! This is a NBB version that acts more like a very large mk23. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.