Victory Posted March 24, 2007 Report Share Posted March 24, 2007 (edited) See my other post...it's been edited. And, so, what, you guys want gun p0rn? I'll do my best! It's nothing special...I'm just here to make amends! -Vic Edit: Your tone of writing seemed a tad (wait, really) sarcastic. It sounds odd, but it gave off a patronizing tone. <{POST_SNAPBACK}> Again I say "Exactly!" Edited March 24, 2007 by Victory Link to post Share on other sites
evansy Posted March 24, 2007 Report Share Posted March 24, 2007 Slightly better pics of my Armalites From now on I'll wait untill I have good natrural light before taking pics. Link to post Share on other sites
Brett230SX Posted March 24, 2007 Report Share Posted March 24, 2007 Neets, This thread is like a candy store for Armalite fanboys and girls for sure. It's nice to be able to see every possible combo (wait, is that even possible?) and then formulate a game plan! All we need now is an Armalite with the kitchen sink and a spork on the RIS and we're done! The Crane Stock add on is from Echo1 and I ordered it from Evike (I'm sure I will get lots of Boooo's over that'n) I can not confirm if it will fit a Combat stock but it physically bolts onto the LE Colapsible stock making it a permanent item. Does it function? In what respect? It functions the same as real steel in that it has tubes to hold Lithium or AA or AAA batteries, with O-Ringed end caps. Could it be used to make a Crane battery pack? I would imagine it could be done. The leapers scope works great... But it doesn't have the look.... I want that stinkin Triijicon Acog but the idea of spending nearly a grand on a scope for a toy gun, doesn't really appeal to me... But on the other hand I could justify it for a real AR15 Brett you pretty much have the gun that I have been planning to upgrade to. The G&P body, Leapers scope, Madbull silencer, and even the crane stock are the adds on I've been planning on getting. Kinda cool to see what it looks like when it's all finished. Where did you get that crane stock add on though and is it functional or purely cosmetic? It seems to be a lot cheaper of a way to go instead of spending a lot on an actual crane stock. <{POST_SNAPBACK}> Link to post Share on other sites
redbaronz14 Posted March 24, 2007 Report Share Posted March 24, 2007 Here are some shots of my ICS M4 SIR- Link to post Share on other sites
redbaronz14 Posted March 24, 2007 Report Share Posted March 24, 2007 Enjoy! -Redbaronz14 Link to post Share on other sites
evansy Posted March 24, 2007 Report Share Posted March 24, 2007 I want that stinkin Triijicon Acog but the idea of spending nearly a grand on a scope for a toy gun, doesn't really appeal to me... But on the other hand I could justify it for a real AR15 <{POST_SNAPBACK}> Why not get a G&P or Guarder one? I've got the Guarder red cross one and I prefer it over Aimpoint replicas, the only down side is you cant carry handle mount it. I've had a look at the G&P scope ones too and there really nice and I would have got one of those if it wasnt for a freind selling the Guarder one cheap. The optics are really clear and you can even carry handle mount them. Link to post Share on other sites
Victory Posted March 24, 2007 Report Share Posted March 24, 2007 redbaronz14! That looks AWESOME! Almost exactly as to how I'd want the final version of my TM to look like!!! -Vic Link to post Share on other sites
redbaronz14 Posted March 24, 2007 Report Share Posted March 24, 2007 Thank you very much for the thoughtful comment! Link to post Share on other sites
Smithy1988 Posted March 24, 2007 Report Share Posted March 24, 2007 redbaronz14 very nice. It just all seems to fit together well and looks great. how does it prefer in the field? Smithy Link to post Share on other sites
Ezek_GrayFox Posted March 24, 2007 Report Share Posted March 24, 2007 Current Blaster Link to post Share on other sites
Smithy1988 Posted March 24, 2007 Report Share Posted March 24, 2007 (edited) Not sure about the paint on the body, but other then that, is it for sale? Excellent work. If i didn't own a P90 i would be tempted to buy of these. I might of gone for a second pistol grip at the front rather then the bi-pod tho, as it's a CQB, but that's just personal preference. But i like it Smithy Edited March 24, 2007 by Smithy1988 Link to post Share on other sites
twan Posted March 24, 2007 Report Share Posted March 24, 2007 SPR Mk12 Mod1 Link to post Share on other sites
suicidalsnowman Posted March 24, 2007 Report Share Posted March 24, 2007 redbaronz14 how come you have two front sights? Link to post Share on other sites
redbaronz14 Posted March 24, 2007 Report Share Posted March 24, 2007 (edited) Smithy1988- It preforms awesome in the field, shoots right around 385-390 FPS, is very quiet, and is packin a 9.6 3600 MAH in the Crane. It is one of the quietest guns I have ever heard. I also have a guide made by the previous owner (yes, the gun was recently traded) on how to take it back to a regular M4 in 5 minutes: http://hometown.aol.com/u71gumbo/m4sds.html Suicidalsnowman- I have two front sights for two reasons; 1.) I was too lazy to take off the flipup. 2.) When I put the silencer inside the SIR, I no longer have the barrel front sight. Here is an old pic of the silencer inside the SIR; I will take some more artistic pictures of it with the built in silencer later on today. Enjoy, Carson Edited March 24, 2007 by redbaronz14 Link to post Share on other sites
sturgis Posted March 24, 2007 Report Share Posted March 24, 2007 My SR16M4 DM setup more pics here Link to post Share on other sites
Plymouth Roadrunner Posted March 24, 2007 Report Share Posted March 24, 2007 Can you see ANYTHING out of that scope with that PEQ there??? You should mount it on the left Rail... Link to post Share on other sites
sturgis Posted March 24, 2007 Report Share Posted March 24, 2007 (edited) yes i can, the scope is a BSA Deerhunter .... x10 zoom, can't remember the magnification, and even when zoomed out completely, the peq doesn't appear in the fov edit, and when mounted on the side, the laser in the peq is so offcentre to the crosshair it doesn't even appear in the scope fov on long distances... but on the top it does... not that it matters much when shooting, but i figure if i'm to haul a batteryless peq around, i should atleast be able to see the damn laser Edited March 24, 2007 by sturgis Link to post Share on other sites
That_One_Person Posted March 24, 2007 Report Share Posted March 24, 2007 Looks like you have everything short of a Tactical Beer Can Holder (TBCH). Link to post Share on other sites
sturgis Posted March 24, 2007 Report Share Posted March 24, 2007 Looks like you have everything short of a Tactical Beer Can Holder (TBCH). <{POST_SNAPBACK}> pffff, why bother with that, if you have a 100oz camelback wich deals with that problem Link to post Share on other sites
ChrisWPA Posted March 24, 2007 Report Share Posted March 24, 2007 haha wow that is a nice gun, good job Link to post Share on other sites
visionviper Posted March 24, 2007 Report Share Posted March 24, 2007 (edited) Pictures of my just finished XM16E1 (M16A1 with 3 pronged flash supressor) I have a couple more here. The gun it made from a mix and match set of parts. Hurricane M16A1 body G&P M16A1 frontend TM M16A1 stock, grip, and gearbox Guarder mag catch and bolt release I am missing the rear sight though. Can't seem to find a metal one, or even a plastic one. If you have one or know where I can get one shoot me a PM. Edited March 24, 2007 by visionviper Link to post Share on other sites
srpg Posted March 24, 2007 Report Share Posted March 24, 2007 SPR Mk12 Mod1 http://users.edpnet.be/castreuil/airsoft/spr_full.jpg <{POST_SNAPBACK}> Nice one, can you show some more pictures? Is that the spr grip or the MIAD grip you are using? I can't tell from this angle thanks Link to post Share on other sites
That_One_Person Posted March 24, 2007 Report Share Posted March 24, 2007 (edited) Is there a mag release fence on that XM16E1? If so........ IT IS NOT TRUE XM16E1. I wish airsoft comapnies weren't so dumb sometimes. EDIT: Not you, the company is stupid if they labeled it wrong. Edited March 24, 2007 by That_One_Person Link to post Share on other sites
visionviper Posted March 24, 2007 Report Share Posted March 24, 2007 (edited) Is there a mag release fence on that XM16E1 It has one. It is really supposed to be a M16A1. I just like the 3 pronged flash supressor. So I guess it is like half both. XM16A1 maybe? Edited March 24, 2007 by visionviper Link to post Share on other sites
visionviper Posted March 24, 2007 Report Share Posted March 24, 2007 (edited) *nothing to see here* Edited March 24, 2007 by visionviper Link to post Share on other sites
Recommended Posts