(un)cooldude Posted January 29, 2007 Report Share Posted January 29, 2007 A&K S-System, with quite a few modifications. Link to post Share on other sites
Mike_West Posted January 29, 2007 Report Share Posted January 29, 2007 (edited) How easy is it to make a SOC 16 out of one of those, like would you chop the barrel, or just buy the whole barrel assembly in a SOC16 style.<{POST_SNAPBACK}> Cyma will release their version of SOC16 this spring, I got this one confirmed. Yup, same thing here. And if you ever dissasemble it, never take the plate off of the bottom of the grip. My motor slid down, and after trying it with the motor too low, it got burnt up. <{POST_SNAPBACK}> Matt, either you're mechanically impaired, or I'm some sort of airsoft wizard. I had no problems with taking mine off. Plus, this M4S-System looks damn cool. Edited January 29, 2007 by Mike_West Link to post Share on other sites
Caparzofpc Posted January 29, 2007 Report Share Posted January 29, 2007 BE M15 Link to post Share on other sites
quakcow Posted January 29, 2007 Report Share Posted January 29, 2007 That is a nice looking gun youve got there Caparzofpc. Ive got a few of the chinese guns aroung here, haven't got a chance to take pictures yet, maybe later this week... Link to post Share on other sites
doopydoo Posted January 30, 2007 Report Share Posted January 30, 2007 UTG MP5 raped by scope? Link to post Share on other sites
Epyon Posted January 30, 2007 Report Share Posted January 30, 2007 UTG MP5 raped by scope? <{POST_SNAPBACK}> Actually, I think that fine looking scope is getting raped by the UTG. Link to post Share on other sites
Epyon Posted January 31, 2007 Report Share Posted January 31, 2007 Sorry for the double post, I couldn't edit my last one. Jieke M93r AEP After removing a bit of material off of the nozzle, it feeds perfectly. Power and ROF are comparable to my Cyma CM.030s (a bit higher on both). I probably won't use the stock battery, after read MANY stories of them venting under charge. I'm quite impressed with it. Link to post Share on other sites
Rosco151 Posted January 31, 2007 Report Share Posted January 31, 2007 Hey UK bods, where are you ordering your clones from? I've just started looking into getting one, wondered if there were any UK suppliers with a decent range or if you had to go through GunnerAirsoft or something. I'm quite interested in the Warrior L96 myself... Link to post Share on other sites
falconfour4 Posted January 31, 2007 Report Share Posted January 31, 2007 Try www.Actionhobbys.co.uk they have a fairly good range and they are getting some of the newer stuff in this week. i am hopping to get the chinese clone MP5k thats comes out from them. Link to post Share on other sites
dannyboy Posted January 31, 2007 Report Share Posted January 31, 2007 Clicky Clicky Clicky Link to post Share on other sites
Rosco151 Posted January 31, 2007 Report Share Posted January 31, 2007 Cool, cheers for the pointers guys. Now, anyone have any idea how to remove money from your wife's vicelike grip? (kidding honey!) Link to post Share on other sites
falconfour4 Posted January 31, 2007 Report Share Posted January 31, 2007 offer to do the washing up for the next month, massage her feet, rub cream into her legs OR get a spine and stand up for yourself, i'm sure its you that probably earns it all Link to post Share on other sites
Guinness Posted February 1, 2007 Report Share Posted February 1, 2007 offer to do the washing up for the next month, massage her feet, rub cream into her legs OR get a spine and stand up for yourself, i'm sure its you that probably earns it all <{POST_SNAPBACK}> ...Oh no he didn't Link to post Share on other sites
Rosco151 Posted February 1, 2007 Report Share Posted February 1, 2007 (edited) ... yeah, he did. God help him, his life can now be measured in seconds until any female seeing that post catches up with him! I have a spine, it's just that I value my sex life, especially since I'm not gonna be around to get any for the next four months! Enough spam, back to the topic... Edited February 1, 2007 by Rosco151 Link to post Share on other sites
gerrysnaps Posted February 2, 2007 Report Share Posted February 2, 2007 This one's got a little of everything in it but pretty much pure "ACM" (for "All-China-Made") as we like to call it: Base gun was a generic copy of the TM M4A1 with a metal gearbox (the 'M' M4A1), front set and crane stock are from "LPEG" rifles with plastic gearboxes, accessories are chinese copies except for the SR16 styled rear flip which is TM and the sebone rail which is locally made. The barrel measures 16 inches so guess what, it's in Recon Rifle territory! Link to post Share on other sites
Guardsman Posted February 3, 2007 Report Share Posted February 3, 2007 my warrior1 L96 with a new paint job hope you like it Link to post Share on other sites
justjoe Posted February 3, 2007 Report Share Posted February 3, 2007 looks nice. the paint job makes it look alot less cheap. Link to post Share on other sites
DeathatDawn12 Posted February 3, 2007 Report Share Posted February 3, 2007 Yea, that paintjob is really good. Did you just use krylon? Link to post Share on other sites
vbtb110 Posted February 3, 2007 Author Report Share Posted February 3, 2007 Nice L96! Told you this thread was genius Very nice guns everybody, keep it up! Link to post Share on other sites
PlasticMag Posted February 3, 2007 Report Share Posted February 3, 2007 No, the blue tape was used in the Soviet era to show support for there country and the Communist cause. It is more often seen on full stocked weapons such as RPK's and AK47's. But, I used for milsom purposes and to keep my ghetto stock where in needs to be. <{POST_SNAPBACK}> What are you smoking? It was blue because the most common electrical tape was blue... Link to post Share on other sites
Guardsman Posted February 3, 2007 Report Share Posted February 3, 2007 Yea, that paintjob is really good. Did you just use krylon? <{POST_SNAPBACK}> indeed i did use Krylon (olive). i did try another spray paint, but it judt didnt look or feel right. Link to post Share on other sites
The Crunchy Bunny Posted February 4, 2007 Report Share Posted February 4, 2007 Plastic Mag, I got that out of a book. Damn, either the editors where high on LSD and Painkillers or I just caught the once in a lifetime chance to prove PlasticMag wrong. But unfortuantly I don't think it's the latter of the two. Link to post Share on other sites
srpg Posted February 4, 2007 Report Share Posted February 4, 2007 already posted in the armalite thread but oh well Blood, Sweat, and Tears into this A&K S-System along with Zeke Upper+CA Lower+KA G27 Grip+CA Full Stock+Various Internal upgrades.. Link to post Share on other sites
fatJoe Posted February 4, 2007 Report Share Posted February 4, 2007 (edited) Me holding Paul (editor of AI mag)'s SCAR at Chobham yesterday I will be purchasing one before April if i get the funds, it really is a nice gun, not sure how it performs though. Edited February 4, 2007 by fatJoe Link to post Share on other sites
101matt1 Posted February 4, 2007 Report Share Posted February 4, 2007 I can't see it, make it bigger... Link to post Share on other sites
Recommended Posts