Madfingaz Posted December 25, 2008 Report Share Posted December 25, 2008 Nice Glocks in here Quote Link to post Share on other sites
alark Posted December 26, 2008 Report Share Posted December 26, 2008 Will be posting pics of my KWA G19 which is rather battered now, my KSC G18c and my KSC G17 now i've had it back from being upgraded and fixed Pics to come soon as. Cheers *AL* aka Lofty Quote Link to post Share on other sites
BigAl Posted December 26, 2008 Report Share Posted December 26, 2008 Vicious - Wow just checked out their custom gas guns. These are amazing basically built to firearm standards at the same sort of cost as a firearm! Quote Link to post Share on other sites
nickeh Posted December 26, 2008 Report Share Posted December 26, 2008 Here's my new HFC Glock 17. It may not seem very glamorous but I only paid $15 for it. It was being sold as a broken gun but when I got it I found that after some tender loving care all it really needed was a new inner barrel (the inner barrel wasn't included with the gun). Sounds like a great deal to me, and it's looking nice Quote Link to post Share on other sites
babybackribs Posted December 26, 2008 Report Share Posted December 26, 2008 All you Glock guru's, is it possible to mod a TM G17 into an auto-only gun? Quote Link to post Share on other sites
Wutang Posted December 26, 2008 Report Share Posted December 26, 2008 3 Glock AEPs, 2 CYMA, 1 TM Quote Link to post Share on other sites
Wutang Posted December 27, 2008 Report Share Posted December 27, 2008 With a homemade extendable stock Quote Link to post Share on other sites
ReverseFlank Posted December 27, 2008 Report Share Posted December 27, 2008 How well do your AEPs work for you? I have not seen them preform very well compared to the GBBs Quote Link to post Share on other sites
CapaciousZepher Posted December 28, 2008 Report Share Posted December 28, 2008 How well do your AEPs work for you? I have not seen them preform very well compared to the GBBs Eh? They kick butt compared to most GBBs. They have better range, better accuracy (mostly due to TM's excellent hopup) and are obviously uneffected by temperature. They are also very quiet. Downsides are weak FPS and the use of stick mags, and the obviously lack of blowback. I love my TM USP AEP and would take it over a GBB almost all the time, except perhaps the middle of summer. Certainly AEP's rock for winter gaming. Cheers! - CapaciousZepher Quote Link to post Share on other sites
chris u'5 Posted January 1, 2009 Report Share Posted January 1, 2009 So for those that have done it, is it worth fitting a Pro Arms frame? Apart from the Glock logo on the grip is there any other improvements over the original? Quote Link to post Share on other sites
Wai Hoong Chan Posted January 1, 2009 Report Share Posted January 1, 2009 hot glocks there Wutang! Have you got a 'side on' pic of the custom stock? How did you make it? Quote Link to post Share on other sites
QDRenegade Posted January 1, 2009 Report Share Posted January 1, 2009 Finally was able to nab a photo of my G19 that didn't suck more than a portable Hoover... This puppy was my first airsoft gun and will probably remain my only GBB though the cold weather doesn't suit it woo well. Glock repaired my light/laser within the last week so I'm happy to have that back - don't need a light on the AEG anymore. For $90, I can pick up a pair of Trijicon tritium glock sights (night sights). Anyone believe its worth looking into? Quote Link to post Share on other sites
chris u'5 Posted January 1, 2009 Report Share Posted January 1, 2009 (edited) RS sights usually fit when it comes to the front sight (I've only tried stock Glock RS front sights) but I've tried a selection of RS rear sights and all have been too narrow for the dovetail on the airsoft replica. Solutions are making some kind of shim or gluing the rear sight into place. Of the rear sights I've tried some are slightly wider than others but all required something to hold them in place properly. I'd be interested to hear the results if you decide to go for it, I've always fancied a set of Trijicon sights. Edited January 1, 2009 by chris u'5 Quote Link to post Share on other sites
DesertFoxRomel Posted January 1, 2009 Report Share Posted January 1, 2009 KSC G18C Quote Link to post Share on other sites
junior Posted January 2, 2009 Report Share Posted January 2, 2009 (edited) For $90, I can pick up a pair of Trijicon tritium glock sights (night sights). Anyone believe its worth looking into? I've been able to snag a pair of used Tritium Glock sights from my local gunsmith and certified Glock Armorer for about $25. Rear sight was a bit narrow to fit in the dovetail like Chris u'5 said, but the front sight worked fine. $90 for a set of sights for an Airsoft pistol sounds a bit extreme, bit hey... Whatever floats your boat. God knows I've spent more on accessories myself Nice photo BTW. Edited January 2, 2009 by junior Quote Link to post Share on other sites
Weirdguy Posted January 3, 2009 Report Share Posted January 3, 2009 I know, this is probably the worst photo I have ever taken, but I just wanted people to know I have a glock KSC/KWA 18c. My friend picked it up for $60 at a local store with 2 mags (one extended) and it only works 10% of the time. 90% of the time it just vents all the gas from the mag. When it does work the slide usually has to be pushed forward. I see that you can buy new recoil springs and hammer springs. Would either of these fix my problems? Quote Link to post Share on other sites
aznconverter Posted January 4, 2009 Report Share Posted January 4, 2009 (edited) My kwa did the same thing. Does it do that with both mags? Mine only liked the extended mag so i tried switching parts out between the two and for some reason now they both work beautifully. Try switching out the (cant think of the proper name) top part of the mag that includes the feeding lips and rubber exit valve. Edited January 4, 2009 by aznconverter Quote Link to post Share on other sites
Weirdguy Posted January 4, 2009 Report Share Posted January 4, 2009 My kwa did the same thing. Does it do that with both mags? Mine only liked the extended mag so i tried switching parts out between the two and for some reason now they both work beautifully. Try switching out the (cant think of the proper name) top part of the mag that includes the feeding lips and rubber exit valve. No, it happens with both mags. I think it might just be the temperature though, it only seems to fire if it has been sitting inside for awhile. Quote Link to post Share on other sites
Black Dog Posted January 4, 2009 Report Share Posted January 4, 2009 TM G17 with PGC slide and a Xiphos NT light mounted on it.... ...and off course a badass "on steroids" holster to go with it Quote Link to post Share on other sites
AnotherJesus Posted January 5, 2009 Report Share Posted January 5, 2009 Your pictures are so much more helpful than Blackhawk's. Let us know how the holster performs once you've used it. I'm very interested. Quote Link to post Share on other sites
mikogel Posted January 6, 2009 Report Share Posted January 6, 2009 (edited) okay this is my glock its a cyma 030 with couple upgrades. sorry about the quality of the pictures. Also wutang are those metal slide on those beasts. lol Edited January 6, 2009 by mikogel Quote Link to post Share on other sites
Apache137 Posted January 6, 2009 Report Share Posted January 6, 2009 nice glocks wutang thats an interesting home made stock.. Quote Link to post Share on other sites
jamesbernatchez Posted January 6, 2009 Report Share Posted January 6, 2009 Just got my two Glocks in. Haven't had a chance to shoot them as I am out of gas. Don't know if I even put the tan one together correctly. It looks right and the slide slides fine Glock parts list right now: TM Glock 17 3rd Gen TM Night Sights TM Hi-Capa 5.1 Inner barrel Shooters Design Outer Barrel w/ threaded adaptor King Arms Delta Force Silencer Guarder Tan Frame (black frame is stock) Guarder 150% spring (not installed until I get my metal slide) Let me know what you think Should I keep the Glocks as is (one tan and one black) or should I do both tan? I have the other Guarder frame here. Quote Link to post Share on other sites
mikogel Posted January 6, 2009 Report Share Posted January 6, 2009 Yo james bernatchez which company makes those glocks? Personally i would keep one tan one black so you can change them according to your kit. Quote Link to post Share on other sites
jamesbernatchez Posted January 6, 2009 Report Share Posted January 6, 2009 Glocks are made by Tokyo Marui. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.