quiksilver6184 Posted May 17, 2016 Report Share Posted May 17, 2016 I must say I like your less bling version better than the original, quicksilver. Yeah, that silver trigger was killing it for me. I dropped off the parts with my buddy at the prop shop yesterday, so hopefully it wont be too much longer and I will have the brass backstrap and mag release installed. Quote Link to post Share on other sites
Katotaka Posted May 18, 2016 Report Share Posted May 18, 2016 That trigger looks really like ZEV fulcrum if I have not mistaken, so, yeah, a "proper" SAI trigger would help the build. Quote Link to post Share on other sites
Katotaka Posted May 19, 2016 Report Share Posted May 19, 2016 Unplanned ZEV build Was making something else on SLS 3d printing service provider website, messed around to see if something worth trying ( and to fill minimum shipping charge ), saw ZEV Dragonfly open slide set, and this: TM G17Ken's Props ZEV Dragonfly Open Slide Set Guarder Frame, Trigger Bar Gunsmodify Serial#, Take Down Stop, Slide Stop, ZEV Fulcrum-ish Trigger Ready Fighter ZEV Slim Magwell Shooter's Design +2 Mag Base C-More 6MOA Click Switch <----- Wasn't really want to build this quick, but it's a crime for not buying this at 30% off and put it on. Airsoft Surgeon SJC style Optic Mount ( was black, but some other parts are not available in black, and silver mount matches grey C-More more, and saved A LOT on the sight so why not? ) 2 Quote Link to post Share on other sites
johny_blaze Posted May 27, 2016 Report Share Posted May 27, 2016 (edited) https://imgur.com/IFIPo53 Edited May 27, 2016 by johny_blaze 1 Quote Link to post Share on other sites
LJ.NL Posted May 29, 2016 Report Share Posted May 29, 2016 (edited) Back to basic TM G17 with Guarder steel kit + frame: Edited May 29, 2016 by LJ.NL 5 Quote Link to post Share on other sites
icolater Posted May 29, 2016 Report Share Posted May 29, 2016 ^^^ beautiful!!! So much nicer then the sai , so sick of stippled frames, tacky gold barrels and stupid looking triggers. It looks perfect like a glock should! Are u running a steel inner frame? 5 Quote Link to post Share on other sites
LJ.NL Posted May 29, 2016 Report Share Posted May 29, 2016 Thanks, very happy with it No, it has the stock inner frame. Quote Link to post Share on other sites
BioRage Posted May 30, 2016 Report Share Posted May 30, 2016 (edited) SAI is life though. Looks better with APL, but didn't take any; also was like midnight, so basement bad quality lighting is real :3 How did the guarder steel slide fit? drop in? Edited May 30, 2016 by BioRage 2 Quote Link to post Share on other sites
LJ.NL Posted May 30, 2016 Report Share Posted May 30, 2016 Almost a drop-in, was a tight fit but a few cycles and it was running smooth Quote Link to post Share on other sites
Squad 701 Posted June 1, 2016 Report Share Posted June 1, 2016 Nova ZEV Glock 17L Dragonfly (Japan Edition) 5 Quote Link to post Share on other sites
icolater Posted June 1, 2016 Report Share Posted June 1, 2016 Ok that is slick! I changed my mind about stippled frames a bit as long as there is no Gold bits. Nice build Squad, looks perfect as always. 1 Quote Link to post Share on other sites
Katotaka Posted June 2, 2016 Report Share Posted June 2, 2016 Arggghh dayum, nice gun, very clean frame job I wonder if this slide is a replica of particular custom model, or just one of "standard production" slides.It's so attractive that I'm getting one anyway. 1 Quote Link to post Share on other sites
wolfgeorge Posted June 5, 2016 Report Share Posted June 5, 2016 Perfect mate .. Perfect! Wolf 1 Quote Link to post Share on other sites
Mitsu Posted June 5, 2016 Report Share Posted June 5, 2016 My Fallout inspired shell for my KJW.. Yeah I'm using a fork as triggerguard.. I call it Rosten (Swedish for the rust). 3 Quote Link to post Share on other sites
mimesis Posted June 5, 2016 Report Share Posted June 5, 2016 (edited) Nova ZEV Glock 17L Dragonfly (Japan Edition) Screw the immaculate build, how do you get such perfect photos without a single speck of dust? Surfaces look praeternaturally clean, together with the fantastic lighting... Edited June 5, 2016 by mimesis 1 Quote Link to post Share on other sites
NonEx Posted June 5, 2016 Report Share Posted June 5, 2016 My Fallout inspired shell for my KJW.. Yeah I'm using a fork as triggerguard.. I call it Rosten (Swedish for the rust). That thing is messed up But nice job nonetheless. Quote Link to post Share on other sites
Mitsu Posted June 6, 2016 Report Share Posted June 6, 2016 (edited) That thing is messed up But nice job nonetheless. The frame was already in a very bade shape, 4-5 different layers of spray, bad stippling ect. The slide was badly polished by previous owner and was scratched and crappy. A bit of fire/wood/paint/ a old fork later... A bit of fun and a new twist on the plain tacticool glock. Edited June 6, 2016 by Mitsu 1 Quote Link to post Share on other sites
mightyjebus Posted June 11, 2016 Report Share Posted June 11, 2016 TM G26 with Guarder Slide, Frame, Sights, Inner barrel, magazine release and Maple Leaf hop rubber last thing to do is replace the trigger Army Glock 17 with Guarder Frame, Trigger and Magazine base plate in Tan. Quote Link to post Share on other sites
vorpalbunnie Posted July 1, 2016 Report Share Posted July 1, 2016 PRIME 17L and Octagon/BELL FPS-system 17L "Custom" Quote Link to post Share on other sites
NonEx Posted July 3, 2016 Report Share Posted July 3, 2016 Stark Arms/VFC Glock 19 GEN3 with Cerakoted slide and outer barrel as well as some real Glock OEM parts (sights, slide release, magazine catch, trigger, magazine floor plate.) and a custom "Project RS Case" pistol case setup Shot with Nikon D600 DSRL. Exposure calibrated, white balance calibrated, exposure corrected, white balance corrected and color corrected. 3 Quote Link to post Share on other sites
LJ.NL Posted July 4, 2016 Report Share Posted July 4, 2016 Awesome piece! Quote Link to post Share on other sites
NonEx Posted July 4, 2016 Report Share Posted July 4, 2016 Although it looks great you know you can't use SA Glocks without them breaking. So this will soon be replaced by a custom KJW x Guarder Glock 19 GEN3 build 2 Quote Link to post Share on other sites
renegadecow Posted July 5, 2016 Report Share Posted July 5, 2016 Stippled a friend's SAI G43. 2 Quote Link to post Share on other sites
NonEx Posted July 5, 2016 Report Share Posted July 5, 2016 So I "had" to (OCD) re-work these in Adobe Lightroom after taking a crash course via Lynda.com. If I could edit the pics in the above post or remove it I would (Not that anyone will be able to tell. But I can ) Sowwy. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.