The Crunchy Bunny Posted January 22, 2009 Report Share Posted January 22, 2009 you could give me one for free. then it would get alot of use! I'm serious Link to post Share on other sites
uscmCorps Posted January 22, 2009 Report Share Posted January 22, 2009 you could give me one for free. then it would get alot of use! I'm serious LOL... I'll take it under consideration. Link to post Share on other sites
Magsz Posted January 23, 2009 Report Share Posted January 23, 2009 Corps. The replica AP is mounted in a real ADM mount. The first rifle is my buddies gun that i built for him. I would say that like any other aimpoint replica its functional but not to the same level of the real thing. I wont use replica optics on my real guns nor will i use them on my airsoft rifles. They're too important of a tool to skimp on as far as im concerned. For all intents and purposes though, the replicas work. Both guns are set up with mosfets featuring three round burst. The First rifle is actually stupidly quiet with that suppressor on there, its really quite interesting. On top of all of that, originally my design intent was to slap two CTR's onto the guns but unfortunately, wiring the guns with fets AND batteries became a bit of an ordeal that i didnt want to deal with. The stubby style stocks actually work out really well from a functional standpoint although aesthetically they leave alot to be desired. Link to post Share on other sites
Victory Posted January 23, 2009 Report Share Posted January 23, 2009 My apologies for posting this everywhere...I'm just really liking the way it's turning out. My WIP USMC IAR: If I keep it, I'll add a black MIAD. -Vic Link to post Share on other sites
Spartan452 Posted January 23, 2009 Report Share Posted January 23, 2009 I dunno about you guys, but the tan body is not very pleasing to look at... Link to post Share on other sites
Mr Foxhound Posted January 23, 2009 Report Share Posted January 23, 2009 The real IAR has one. Link to post Share on other sites
Pradal-Serey Posted January 23, 2009 Report Share Posted January 23, 2009 Very nice IAR Victory, what gas bloc do you use on this one? Link to post Share on other sites
Andrew March Posted January 23, 2009 Report Share Posted January 23, 2009 Victory, where does the battery go on this beastie? Link to post Share on other sites
navymp28 Posted January 23, 2009 Report Share Posted January 23, 2009 VIC- Hella nice job on that IAR! Link to post Share on other sites
Victory Posted January 23, 2009 Report Share Posted January 23, 2009 (edited) Thanks guys. Very nice IAR Victory, what gas bloc do you use on this one? I have a H&K gas piston gas block on the way that I'll modify slightly. (It should fit under the rail system.) Victory, where does the battery go on this beastie? Battery? Battery?! If I keep it, it'll be converted to gas blow back. -Vic Edited January 23, 2009 by Victory Link to post Share on other sites
PynkPanthyr Posted January 23, 2009 Report Share Posted January 23, 2009 So, um pics of it assembled? please? Link to post Share on other sites
Victory Posted January 23, 2009 Report Share Posted January 23, 2009 Once the rest of my parts arrive (heavy barrel extension, gas block, other bits), that I will. -Vic Link to post Share on other sites
The Crunchy Bunny Posted January 23, 2009 Report Share Posted January 23, 2009 Very, Very nice IAR build. I think it looks cool with the tan reciver. Link to post Share on other sites
Victory Posted January 24, 2009 Report Share Posted January 24, 2009 I have a H&K gas piston gas block on the way that I'll modify slightly. (It should fit under the rail system.) Wrong-O! It won't fit without serious modification, and I don't want to risk fudging it up. So, I'll need to order a lower profile gas block... -Vic Link to post Share on other sites
Fuser Posted January 24, 2009 Report Share Posted January 24, 2009 (edited) Wrong-O! It won't fit without serious modification, and I don't want to risk fudging it up. So, I'll need to order a lower profile gas block... -Vic Indeed—one of the issues I had with my DD Lite rail was that nothing but DD's own gas block would fit beneath it. And it is sixty bucks, and there were no airsoft copies. Edited January 24, 2009 by Render Link to post Share on other sites
Victory Posted January 24, 2009 Report Share Posted January 24, 2009 http://www.tacticalgeardepot.com/product_i...4d433a86c58f9d5 I'm pretty sure this one will work. -Vic Link to post Share on other sites
Pradal-Serey Posted January 24, 2009 Report Share Posted January 24, 2009 I have this gas block, it fit the DD rail, no problem as well as the low profile G&P one Link to post Share on other sites
Botisho Posted January 24, 2009 Report Share Posted January 24, 2009 My Armalite M4 G&P CQB Peq-15 Black Vanaras Holosight 552 Replica Soon: G&P M4 KAC Silencer Ergo Grip Regards.- Link to post Share on other sites
Doughguy Posted January 24, 2009 Report Share Posted January 24, 2009 Ironsight of T@RR0R!!! Link to post Share on other sites
Zmarre Posted January 24, 2009 Report Share Posted January 24, 2009 That's, hands down, the best idea for an original rifle I've ever seen. Link to post Share on other sites
Vercingetorix Posted January 24, 2009 Report Share Posted January 24, 2009 Man, that on an M2 would be *fruitcage* awesome! Link to post Share on other sites
Roecar Posted January 24, 2009 Report Share Posted January 24, 2009 (edited) Decided to whoreout my M4s by installing a gas piston. The problem is trying to fit it with the Type 3 gas blocks that I have... btw if you're going to buy any of the gas blocks I suggest getting the Matrix versions from Evike.com, they sell for half the cost of DYTAC and King Arms at $40. Edited January 24, 2009 by Roecar Link to post Share on other sites
Keoni77 Posted January 25, 2009 Report Share Posted January 25, 2009 My Contribution ** Click pictures for Full image ** Link to post Share on other sites
pforcerecon Posted January 25, 2009 Report Share Posted January 25, 2009 Looking nice Keoni77, liking the way its turning out for ya. Now that you got rid of that acog you can get your hands on the peq15 and whatever else you need for it. I'll PM you later on about tomorrow's game. Link to post Share on other sites
Victory Posted January 25, 2009 Report Share Posted January 25, 2009 (edited) Decided to whoreout my M4s by installing a gas piston. The problem is trying to fit it with the Type 3 gas blocks that I have... SNIP btw if you're going to buy any of the gas blocks I suggest getting the Matrix versions from Evike.com, they sell for half the cost of DYTAC and King Arms at $40. The only way I've figured out how to do it, without modification, is with this setup: It's not true to the H&K design, as it lacks that one larger chrome piece, but I've seen other gas pistons that look similar to the one in my picture. -Vic Edit: By the way, yes, this setup will also work with lower profile gas blocks. There will be a slight slope in the gas piston, though. Edited January 25, 2009 by Victory Link to post Share on other sites
Recommended Posts