Naveronski Posted March 4, 2009 Report Share Posted March 4, 2009 Reaper that's what you get for a heavy barrel. My to gats atm. My Mk12. Mod 0 [i.mg]http://img.photobucket.com/albums/v205/newhotness05/DSCN0359.jpg[/img] The paints going to change, a crane stock will be added. an ACM T1 Replica on top of the scope and a Harris bipod with mini tango down qd grip between the bipod and receiver. Mk18 Ras II [i.mg]http://img.photobucket.com/albums/v205/newhotness05/DSCN0365.jpg[/img] Current operational gun. Just an ACOG to boot. What made you decide to use the orange on the first rifle? It looks cool, but haven't seen anything like it before. Link to post Share on other sites
frogfish Posted March 4, 2009 Report Share Posted March 4, 2009 Azn, My front post was lose until I screwed it in a little bit and my rear peep was adjusted all the way to one side when I got it, but I have it set and it stays.... Link to post Share on other sites
Whan Posted March 4, 2009 Report Share Posted March 4, 2009 THAR BE A GAP BETWEEN THY RIS AND RECEIVER! In another case, does anyone who has ACM MBUS have issues with a loose rear aperture adjustment wheel? Mine's so loose that it tends to move left and right by itself I think that the G&P URX's seem to have that problem. Mine has a gap too.... Link to post Share on other sites
Althis Posted March 4, 2009 Report Share Posted March 4, 2009 you can make it so it doesnt have a gap, the top rail will just be on the bottom =P Link to post Share on other sites
bloodybiscuit Posted March 4, 2009 Report Share Posted March 4, 2009 My babies.. or shall i say big boys... Link to post Share on other sites
Hispeed1 Posted March 5, 2009 Report Share Posted March 5, 2009 Mini update on 7.5" SBR. (Still waiting for another optic, sling mount and a set of flip-up sights) Regular set-up: SD set-up: Link to post Share on other sites
BigAl Posted March 5, 2009 Report Share Posted March 5, 2009 M4 MOE Carbine. Link to post Share on other sites
The Crunchy Bunny Posted March 5, 2009 Report Share Posted March 5, 2009 Hot Hispeed. Would that new optic be a LaRue-mounted T-1 by any chance? Link to post Share on other sites
SniperSidd Posted March 5, 2009 Report Share Posted March 5, 2009 Do the MOE handguards come with any rails? Link to post Share on other sites
The Crunchy Bunny Posted March 5, 2009 Report Share Posted March 5, 2009 No, but Magpul sells a set of aftermarket jobbies. Link to post Share on other sites
Naveronski Posted March 5, 2009 Report Share Posted March 5, 2009 Nice blaster you've got there Hispeed. What suppressor are you using? Link to post Share on other sites
PlasticMag Posted March 5, 2009 Report Share Posted March 5, 2009 THAR BE A GAP BETWEEN THY RIS AND RECEIVER! In another case, does anyone who has ACM MBUS have issues with a loose rear aperture adjustment wheel? Mine's so loose that it tends to move left and right by itself That's normal. For the price, I'm not terribly worried - I just zero'd it and superglue'd it. Link to post Share on other sites
junior Posted March 5, 2009 Report Share Posted March 5, 2009 Hispeed, are those all RS optics and mounts or clones/replicas? Link to post Share on other sites
0nslaught Posted March 5, 2009 Report Share Posted March 5, 2009 Hispeed, are those all RS optics and mounts or clones/replicas? it looks like the aimpoint and eotech are fake, but the mounts look to be real...is your 7.0 rail a clone? Link to post Share on other sites
Gigueand Posted March 5, 2009 Report Share Posted March 5, 2009 EBB sells the MOE handguards including rails for a little over $40 shipped... Can't beat that deal. Link to post Share on other sites
BigAl Posted March 5, 2009 Report Share Posted March 5, 2009 (edited) They come with three long rails. The one's I got from Gear Up are a set of two short and one long. I thnk this is better as the whole point of the MOE Forend for me is it is light weight yet you can add rail where you need it. I used two short sections, one for the Vert. Grip and one for a M3 on the right upper. Edited March 5, 2009 by BigAl Link to post Share on other sites
junior Posted March 5, 2009 Report Share Posted March 5, 2009 it looks like the aimpoint and eotech are fake, but the mounts look to be real...is your 7.0 rail a clone? I would've guessed opposite... If that Aimpoint is fake, it's the best looking replica Ive seen. Link to post Share on other sites
0nslaught Posted March 5, 2009 Report Share Posted March 5, 2009 I would've guessed opposite... If that Aimpoint is fake, it's the best looking replica Ive seen. actually nevermind im not totally sure for the mounts... but the aimpoint, here it is on airsoft global: http://airsoftglobal.com/product_info.php?...roducts_id=6013 Link to post Share on other sites
Vercingetorix Posted March 5, 2009 Report Share Posted March 5, 2009 I think it has been asked before, they are all repros(mounts et al). But because they are repros you can get/afford more cool kid optics. Smart man Hispeed, smart man.... Link to post Share on other sites
Pariah_WP Posted March 5, 2009 Report Share Posted March 5, 2009 (edited) My baby: BTW Lauer DuraCoat colors dry much lighter than they show them on the site. Their paint called "Magpul Flat Dark Earth" (which I would think would automatically match the MagPul hardware) for instance dries closer to a really dark khaki than a FDE. What you see above is AFTER I added some black and it still is lighter! You will want some black in there for almost all their colors to look right. Also for their coyote brown color you will want a touch of "Jungle Green" or "Magpul OD" in it. That should match most coyote gear perfectly. Edited March 5, 2009 by Pariah_WP Link to post Share on other sites
GuzziHero Posted March 5, 2009 Report Share Posted March 5, 2009 Finally got rid of the horrid MP16 readymag. That opens up a whole new bunch of options: Tactical: Bolt Pistol: and just for Victory... Tec-9 stylee: Link to post Share on other sites
evansy Posted March 5, 2009 Report Share Posted March 5, 2009 M4 MOE Carbine. http://i85.photobucket.com/albums/k70/crew.../RanchRifle.jpg Am teh seks I'm tempted to buy a CA A2 carbine and copy that or maybe a XM177 E2 if the handguard will fit. Link to post Share on other sites
Rambo Kid Posted March 5, 2009 Report Share Posted March 5, 2009 Mk18 Ras II Current operational gun. Just an ACOG to boot. Sorry for quoting a pic, but it was kinda necessary. Anyways, parts list on the MK 18? Link to post Share on other sites
Mattdk Posted March 5, 2009 Report Share Posted March 5, 2009 Here is my project gun. CA m16a1 metal body, JG M733 front end, CA GB. Going to re wire and add a mosfet soon and put a M733 stock on. Link to post Share on other sites
Pariah_WP Posted March 6, 2009 Report Share Posted March 6, 2009 This thread is like page after page or porno... It is hard not to pitch a tent looking in here. Yes...I went there. Link to post Share on other sites
Recommended Posts