Delta_1 Posted November 17, 2011 Report Share Posted November 17, 2011 (edited) Pic of my new warrior DCS pc, am very happy with it it come with fake plates which i was very suprised with. Edited November 17, 2011 by Delta_1 Quote Link to post Share on other sites
Redshirt 1-7 Posted November 17, 2011 Report Share Posted November 17, 2011 (edited) The Flyye 6094 is more accurate if you want a more accurate version of LBT's later 6094's, however, it is not a replica of the current design. It is a replica of the previous design, this is easily shown by the metal push buttons on the cummerbund flap on Flyye's. Older LBT6094's had this feature but has since gotten rid of that.  Flyye also uses Velcro over the chest whilst still allowing the PALS to be used whereas the Pantac only offers PALS with no Velcro. From the looks of the advertisement pictures I have seen on various websites, only Flyye sells theirs with shoulder pads included. Either way that you go, you will get a high quality piece of kit!  Thanks for the info. Probably still going to get the Pantac though, I prefer stuff I can get in the US commonly (Flyye is foreign right? I've never seen any of their kit available in the US).  My pantac came with shoulder pads... another option is the TMC 6094, quite similar to Flyyes and much cheaper, not so high quality though, but some of the TMC products are indeed more than good enough for skirmishing  Again, thank you for the info. How much do TMC rigs run, and is their 6094 one of the "good enough" products?  Last question (I'll try to put some content up next time so I'm not just spamming the thread with nooby questions). Where can I find a good quality MAP replica in khaki? Edited November 17, 2011 by Redshirt 1-7 Quote Link to post Share on other sites
Isamu Posted November 18, 2011 Report Share Posted November 18, 2011 You can get a "pack" of TMC 6094 with several pouches for 100$ shipped IIRC at ebaybanned, very good value, although they take their time to ship their goods... I dont know how good are their PCs, I have a RRV and some pouches, the RRV is quite nice actually, but the M4 pouches... well, not as nice as my pantac ones =( but worth the cheap price. Â BTW, pantac is chinese as well as flyye Quote Link to post Share on other sites
-MOOSE- Posted November 19, 2011 Report Share Posted November 19, 2011 Thanks for the info. Probably still going to get the Pantac though, I prefer stuff I can get in the US commonly (Flyye is foreign right? I've never seen any of their kit available in the US). Â Both Pantac and Flyye are from China, as well as TMC. Â Again, thank you for the info. How much do TMC rigs run, and is their 6094 one of the "good enough" products? Â Last question (I'll try to put some content up next time so I'm not just spamming the thread with nooby questions). Where can I find a good quality MAP replica in khaki? Â TMC seems to be of good enough quality to airsoft with. Of course, you will see a difference in quality in their products when compared to Pantac or Flyye, or any "real name" brand. Their quality is lower, but should absolutely be acceptable for airsoft use. Â I do believe that TMC does make a replica of the MAP. Pantac and Flyye both make accurate replicas, as well as a number of other companies that may or may not have their little twists to the design. Quote Link to post Share on other sites
ericfine50 Posted November 19, 2011 Report Share Posted November 19, 2011 Hi Guys, Here is my Condor MOPC with the HSGI Marsupial Hand Warming Pouch (top). And the M4 pouches are from Recon Tactical. They are part of the R-TAC Line.  You can't see if there, but on the RH-side, I have a G-Code RTI Adapter that is used with the KWA ATP.  (Shameless Plug Alert) - I did a review of this kit on www.TheGearLocker.net  Thanks Eric    Quote Link to post Share on other sites
Kunlun Posted November 19, 2011 Report Share Posted November 19, 2011  I'm really not liking the fake plates. Is it just me or is the curve on them really uncomfortable.  I had these lying around from my Flyye PACA but you can buy them separately aswell: http://shop.ehobbyasia.com/flyye-eva-soft-armor-plate-black.html  Just use a plastic sapi plate as a stencil and cut around it. They fit nice and are very comfy! Quote Link to post Share on other sites
piesoft Posted November 19, 2011 Report Share Posted November 19, 2011 Eclipse RBAV again   Quote Link to post Share on other sites
TheFull9 Posted November 20, 2011 Report Share Posted November 20, 2011 That, is bloody nice, you're clearly a man who knows his kit. Â P.I.G. hydro carrier right? Literally just ordered one myself, and I know that GP on the side there is Warrior, how about the mag pouches though? I've not bought any of theirs in MC yet. Quote Link to post Share on other sites
piesoft Posted November 20, 2011 Report Share Posted November 20, 2011 That, is bloody nice, you're clearly a man who knows his kit. Â P.I.G. hydro carrier right? Literally just ordered one myself, and I know that GP on the side there is Warrior, how about the mag pouches though? I've not bought any of theirs in MC yet. Â Thanks, The mag and admin pouches are Eagle, The frag and GP pouches are Warrior. Quote Link to post Share on other sites
Corrigan Posted November 23, 2011 Report Share Posted November 23, 2011 I have a pic request! I currently have a Pantac RAV in RG, and I wish I had a Paraclete in SG  Does anyone have any good tips for repro plate carriers which look closer to a Paraclete RAV in SG than the pantac? Ideally, does anyone happen to have pics of a vest like that with OD BHI pouches on, á la UKSF?  Thanks! Quote Link to post Share on other sites
Isamu Posted November 25, 2011 Report Share Posted November 25, 2011 Scuffer: Sorry for the delay, here is how I attached the belt to the PC Â Â Â Â And now, just to show a bit my beloved PC Â Â Â Quote Link to post Share on other sites
Scuffer Posted November 26, 2011 Report Share Posted November 26, 2011 Scuffer: Sorry for the delay, here is how I attached the belt to the PC Cheers for getting back to me on this, completely forgot about it. Â I actually really like that idea and it makes me want to get a 6094 copy even more, I think potentially if I could make best use of the space and internal front mag pouches I could justify binning off the cummerbund running a belt like that and then hanging a holster off the belt....... hmm wonder how high the likes of a drop belt holster would hang and if it would line up roughly with my trouser belt underneath it. If that did would I wouldn't even have to have a belt line. Quote Link to post Share on other sites
Isamu Posted November 27, 2011 Report Share Posted November 27, 2011 (edited) I run a first line with my pc, nothing fancy though, drop pouch, shotgun shells pouch for CO2 and AA batteries, and an M4 pouch to carry a BB bottle, this way I can leave the belt on the pC free (except for the small radio pouch). Only downside is the low mag capacity on the PC, but I have seen an admin pouch where I can carry my personal stuff instead of the utility pouch, leaving more space for mag pouches so I can carry 8 in the PC and one or two more in the gun.  About the holster... I havent tested putting one in the belt, but im not sure it will be comfortable or secure when sprinting, maybe its better to carry the pistol in a pouch in the front and add an extra mag pouch to the belt  Love that PC, and thank "the force" for finding the belt solution before I almost sold it Edited November 27, 2011 by Isamu Quote Link to post Share on other sites
Guest Posted November 27, 2011 Report Share Posted November 27, 2011 Anyone using dummy sapi plates in their Banshee PC? I saw these ones http://www.shootercbgear.com/product_info.php?products_id=1429 but they say 10" x 13 " when Shellback says the carrier accepts 10" x 12". I was just wondering if someone could point me to some specific ones they had first hand experience with fitting. Quote Link to post Share on other sites
Agent Hunk Posted November 28, 2011 Report Share Posted November 28, 2011 Did some minor revisions. Crye JPC Front: Crye MBITR pouches TT accessory BFG TKN Paraclete 9mm double AITES shingle Back: Tyr 1.5L carrier 2 Paraclete bangers Quote Link to post Share on other sites
AMC1096 Posted November 28, 2011 Report Share Posted November 28, 2011 Do the Paraclete bangers hold a thunder B? Quote Link to post Share on other sites
Agent Hunk Posted November 28, 2011 Report Share Posted November 28, 2011 Yes. Top pouch has one in it. Quote Link to post Share on other sites
colwombat Posted November 29, 2011 Report Share Posted November 29, 2011 Anyone using dummy sapi plates in their Banshee PC? I saw these ones http://www.shootercbgear.com/product_info.php?products_id=1429 but they say 10" x 13 " when Shellback says the carrier accepts 10" x 12". I was just wondering if someone could point me to some specific ones they had first hand experience with fitting. Â I've been using the large plates I got off AEX with no issues in my Banshee. They do stick out about an inch along the bottom though... Quote Link to post Share on other sites
Guest Posted December 1, 2011 Report Share Posted December 1, 2011 Â I've been using the large plates I got off AEX with no issues in my Banshee. They do stick out about an inch along the bottom though... Â Thanks. Those ones seem to be 10 x 13" as well so the information helps. Now to get some along with pouches. Quote Link to post Share on other sites
CplHicks Posted December 2, 2011 Report Share Posted December 2, 2011 Â TAG Banshee in ATACS Quote Link to post Share on other sites
Corrigan Posted December 2, 2011 Report Share Posted December 2, 2011 Â Pre 2005 paraclete. Moving my SAS load-out away from the pantac rav and onto this. I'll post again once the pouches are on. Quote Link to post Share on other sites
RIXX Posted December 3, 2011 Report Share Posted December 3, 2011 Black Ops, Kandahar PC LBT 6005 Hydrastorm   Quote Link to post Share on other sites
St Matt Posted December 7, 2011 Report Share Posted December 7, 2011 Can anyone recommend a good accurate(ish) plate carrier for a modern USMC grunt loadout please? Quote Link to post Share on other sites
Blackjack13 Posted December 7, 2011 Report Share Posted December 7, 2011 Here's am 86 page thread on USMC, I'm pretty sure everything you'll need will be in there: http://www.arniesairsoft.co.uk/forums/index.php?/topic/179539-usmc-loadouts/ Quote Link to post Share on other sites
St Matt Posted December 7, 2011 Report Share Posted December 7, 2011 Cheers man! Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.