airsoftkona Posted April 6, 2010 Report Share Posted April 6, 2010 (edited) My real steel rig I just got done making a couple days ago. Just finished the pouches Saturday. The pouches have molded Kydex Pmag molded inserts velcroed in. They give a postive click in and out. They work with airsoft as well as real steel pmags. Also work with the short 20 round pmags as well as all GI mags. Both front and back panels of the rig can take soft armor inserts for extra protection. The front has 1/4" closed cell foam to keep it somewhat rigid and the back of the rig has a IIA ballistic insert and runs higher than Lvl IIIA in conjuction with my IIIA vest. It can also run a custom rifle plate in the rear. This rig works with or without armor but was meant to be used as a armor supplement. It is designed as well to have no molle panel on the right side to not impede of drawling a sidearm. The process of start to being done and the hydro pouch is Eagle industries which will be replaced with multicam as soon as I sew one up. Edited April 6, 2010 by airsoftkona Quote Link to post Share on other sites
Hakkon Posted April 6, 2010 Report Share Posted April 6, 2010 Looking good man. How much time have you put into that rig? Quote Link to post Share on other sites
airsoftkona Posted April 6, 2010 Report Share Posted April 6, 2010 Looking good man. How much time have you put into that rig? I would take a guess to say about 8 hours or so of designing, cutting, molding, and sewing. I will most likely end up using it for airsoft too so as to keep my live training rig the same as my airsoft. Quote Link to post Share on other sites
Agent Hunk Posted April 6, 2010 Report Share Posted April 6, 2010 Condor Modular Chest Panel x2 Condor M4 doubles x1 Condor Handgun double x1 Eagle MBITR pouch Still messing around with the configuration. Just got it and don't have many spare pouches and the MBITR I took off my main rig. Quote Link to post Share on other sites
the roob Posted April 7, 2010 Report Share Posted April 7, 2010 cool where did you get it? Quote Link to post Share on other sites
Agent Hunk Posted April 7, 2010 Report Share Posted April 7, 2010 (edited) http://www.airarmory.com And because someone on another forum requested it. Man purse mode: Edited April 7, 2010 by Agent Hunk Quote Link to post Share on other sites
bbondaloose Posted April 8, 2010 Report Share Posted April 8, 2010 (edited) Any pics of you wearing it Wesker Agent Hunk? I want to see how exactly small it is. Edited April 8, 2010 by bbondaloose Quote Link to post Share on other sites
Agent Hunk Posted April 8, 2010 Report Share Posted April 8, 2010 Here's a crappy one I just took that should give you an idea of the size. Quote Link to post Share on other sites
aznriptide859 Posted April 8, 2010 Report Share Posted April 8, 2010 RRV's count as chest rigs, right? Here's the (temporary) setup I have for my P90. The SMG pouch will go dropleg, and I'll probably put a utility pouch there. EBB RRV EBB Hydro Pouch Camelbak 100oz Omega Bladder Pantac Admin Pouch 2 x Pantac Double P90 Pouch Guarder OD Triple SMG Pouch Pantac Medic Pouch Pantac Small Radio Pouch USMC IFAK (on the back for accessories, found it was too big to fit up front for me) Quote Link to post Share on other sites
Agent Hunk Posted April 16, 2010 Report Share Posted April 16, 2010 Arktis 1725 Classic Chest Rig Always liked the design on these and since it wasn't too inexpensive I picked it up. So far unimpressed with the quality of the materials used. The webbing feels very cheap, the Condor one I have seems to be made of stiffer, stronger stuff. Time will tell I suppose. Holds 9 E-mags comfortably, 12 if I want to go crazy. If it sticks around it's due for a few minor mods/tweaks. Quote Link to post Share on other sites
heavri Posted April 17, 2010 Report Share Posted April 17, 2010 Condor Modular Chest Rig Quote Link to post Share on other sites
ssddismymotto Posted April 20, 2010 Report Share Posted April 20, 2010 Just put this together tonight, base is an SDS RACK: Quote Link to post Share on other sites
Lerch Posted April 21, 2010 Report Share Posted April 21, 2010 ~EI LE Rig ~EI Utility Pouch ~EI Magazine Pouch ~TT Magazine Pouch ~HSGI Grenade Pouch ~TT Hard Case Quote Link to post Share on other sites
weka Posted April 21, 2010 Report Share Posted April 21, 2010 My new items a 6sh92 - 5 (from Dimitry at Sovietproperganda), some retro leather TT-holster and an Stechkin APS mag pouch both from vladimirbest on ebay. Hoping the WE browning high power will fit the TT holster so I will stick with the PPK in a makarov holster for the while. Closer view of the APS pouch, holds the colt mags nicely, a spead loader too. Also have the silincer for the PPK and spare PPK mag in it for the photo. Quote Link to post Share on other sites
navymp28 Posted April 22, 2010 Report Share Posted April 22, 2010 Hunk that is a shame the Arktis feels chinsy. I have always like the Classic and rigs similar. I was thinking of getting a Woodland Classic too...I might have to wait and see what your final findings are on it before I do. Quote Link to post Share on other sites
Agent Hunk Posted April 22, 2010 Report Share Posted April 22, 2010 I used it for a few hours this past weekend and its still holding up fine. Talked to someone who had a pretty used Noorloos there too that appeared just as cheap and its held up fine for him and the previous owner. So I can attest to the fact it won't fall apart right away. Will post up if I encounter any issues. The two big side pockets also have hidden pockets behind them. I thought it was worth mentioning because ArktisUSA doesn't mention it on the E-bay auction. Quote Link to post Share on other sites
sowi Posted April 29, 2010 Report Share Posted April 29, 2010 hey guys, probably a lame question....but how did you manage the backpack+chest rig (for example MAV 1piece) combo? Quote Link to post Share on other sites
Reincarnation... Posted April 29, 2010 Report Share Posted April 29, 2010 Are you looking for something like this? Quote Link to post Share on other sites
sowi Posted April 29, 2010 Report Share Posted April 29, 2010 yesss, thank you Reincarnation...is it works ok with the 1 piece version too? Quote Link to post Share on other sites
Reincarnation... Posted April 29, 2010 Report Share Posted April 29, 2010 Should work with all TT Mav other than the Mini Mav, also not recommended to use with Mav bib. Quote Link to post Share on other sites
mrk Posted May 2, 2010 Report Share Posted May 2, 2010 Since my VTAC rig was in the wrong color I needed something that fits my Paraclete SG collection Battlelab v3 RACK -Paraclete M4 (For VIO POV) -Paraclete Bang x3 -Paraclete Quad pistol Still need to field test this to confirm the pouch placement. Quote Link to post Share on other sites
Agent Hunk Posted May 11, 2010 Report Share Posted May 11, 2010 Had to get a different radio pouch but I finished my Comms set up. Can switch between VHF and FRS without changing the head set. This finishes the chest rig that I will use for 80% of games. Eagle 6 mag LE Chest Rig BHI M4 shingle Condor 9mm double x2 Custom HSGI Small Utility Pouches x2 HSGI frag pouches Eagle MBITR Pouch Quote Link to post Share on other sites
GK3 Posted May 12, 2010 Report Share Posted May 12, 2010 Tactical Tailor MAP Pantac Shingles Pantac Pistol Mag Pouches Maxpedition GP NOT Pictured: Tactical Tailor Radio Pouch (on backorder) Tactical Tailor standalone adapter Quote Link to post Share on other sites
jdizzle921 Posted May 21, 2010 Report Share Posted May 21, 2010 Kitlist: Eagle LE Active Shooter Chest Rig PACA Eagle SOF Med pouch Eagle Shoulder Pads L33T ACM sling L33T Mechanix Gloves Chemlights ZipTies Office-Max rubber bands Quote Link to post Share on other sites
CapaciousZepher Posted May 23, 2010 Report Share Posted May 23, 2010 Modded Chicom Chest Rig. - Zepher Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.