Nicoli Posted December 30, 2007 Report Share Posted December 30, 2007 And from today's game... Quote Link to post Share on other sites
Talestar66 Posted January 7, 2008 Report Share Posted January 7, 2008 hey guys i have a question, its kinda aimed at hedganian because hes got the a3 esque kit, but any info is help. I was just wonderign if the a3 kit would fit on a CA a2? Ive looked quite far back in this thread and have seen hedganians beautifull a3 but im not sure if its CA or TM and he has said that he owns both. Quote Link to post Share on other sites
Xsjado Posted January 10, 2008 Report Share Posted January 10, 2008 Here's my (very fingermarked) JG AUG. Its internals are mostly systema except for the piston, which comes from a marui, and a PDI 130% spring. The systema piston was utter rubbish which was surprising considering the apparent quality of the rest. I'm going to re-wire it tomorrow with deans connectors and then it'll take a 9.6V large battery in a pouch on the stock. Depending on what area the pouch covers I may run the wire though the ejection port, so I'll have one of the only front wired AUGs lol. I also plan to spray it OD and get some proper optics for it. Quote Link to post Share on other sites
TerranCmdr Posted January 11, 2008 Report Share Posted January 11, 2008 hey guys i have a question, its kinda aimed at hedganian because hes got the a3 esque kit, but any info is help. I was just wonderign if the a3 kit would fit on a CA a2? Ive looked quite far back in this thread and have seen hedganians beautifull a3 but im not sure if its CA or TM and he has said that he owns both. Both CA and Marui AUGs are identical as far as I know so the kit should work on either. Quote Link to post Share on other sites
rugrat Posted January 24, 2008 Report Share Posted January 24, 2008 i let my imagination run wild with the krylon... >>not finished<< Quote Link to post Share on other sites
Destroyer 105 Posted January 25, 2008 Report Share Posted January 25, 2008 woah now thats a scope! i personally dont like the colour scheme, but its look well done does anyone know where to get a A3 ras kit from btw? Quote Link to post Share on other sites
FallenGuard Posted January 25, 2008 Report Share Posted January 25, 2008 Oh, another Lock On Player.... nice! Destroyer105, do you mean the Action RAS Kit? UNcompany has these, as well as AUGs that already come with it installed. Quote Link to post Share on other sites
Hedganian Posted January 25, 2008 Report Share Posted January 25, 2008 The Action RAS kit is available from many retailers. WGC and Redwolf in HK have it, that I know of. You will need a 500mm inner barrel for use with the RAS kit, to replace the 509mm stock inner barrel. The kit will fit CA and TM AUGs with special receivers (the flat-top). Fitting isn't too much of an issue, just take care. Taking it apart again after fitting to restore the AUG to its original form isn't the easiest thing in the world. Also, bear in mind that once the kit is fitted, the barrel and receiver become one unit, and cannot be separated easily. Any more questions, just let me know. Quote Link to post Share on other sites
Xsjado Posted January 25, 2008 Report Share Posted January 25, 2008 Is the 500mm length for the short version or the "sniper" one, and what is the required length of the other? Quote Link to post Share on other sites
Hedganian Posted January 25, 2008 Report Share Posted January 25, 2008 The action RAS kit only seems to come in one size. I have only seen the "sniper" version you refer to as a fully assembled AEG. I have no idea what inner barrel length it would have. Quote Link to post Share on other sites
Xsjado Posted January 25, 2008 Report Share Posted January 25, 2008 Uncompany have it. So it seems its significantly longer than the normal one. Quote Link to post Share on other sites
fadedcorona Posted January 26, 2008 Report Share Posted January 26, 2008 Both mostly TM. I was going to make an H-bar but i can't find/make a barrel of the right length. i have an m-60 bipod and everything too. So i went the opposite dirrection and made a short AUG. The thing I love about my 2 is that i can mix and match however i please. Quote Link to post Share on other sites
amateurstuntman Posted January 27, 2008 Report Share Posted January 27, 2008 M60 bipod is wrong. http://www.boomarms.com/product_img/sHBACCAUGBP.jpg Quote Link to post Share on other sites
Hedganian Posted January 27, 2008 Report Share Posted January 27, 2008 Fair enough, never saw the sniper version for sale on its own before. Quote Link to post Share on other sites
Rusty65 Posted January 27, 2008 Report Share Posted January 27, 2008 The sniper version is designed for a 650mm barrel as a shorter one may rattle around in the outer barrel as it narrows internally near the tip. As an aside, my 500mm Action ras kit didn't have a hole in the front for the sling loop that you have to remove, but the sniper one did. However the sniper version ras has over size holes for the top rail. Needless to say I was far from impressed. Quote Link to post Share on other sites
Swerve Posted January 29, 2008 Report Share Posted January 29, 2008 Just given birth Aug DMR: CA AUG Civilian KA Phantom Kit 6.03 550mm inner barrel PDC metal dial hop up H-Hop and Systema bucking Gripod 3-9x56 scope To come: Upgraded mechbox inc bore up. Target fps <site semi auto sniper limit>. Will be hard modded to semi only. I now have a normal A1 A stubby A1 but with a swap out railed receiver (see avatar) I think I'm done. Quote Link to post Share on other sites
BentleyCntlGT Posted January 30, 2008 Report Share Posted January 30, 2008 The scope on the A1 AUG's lean off to the side just a tiny bit, correct? Quote Link to post Share on other sites
Hedganian Posted January 30, 2008 Report Share Posted January 30, 2008 No Quote Link to post Share on other sites
Swerve Posted January 30, 2008 Report Share Posted January 30, 2008 I had to look as I have just got up and was doubting my sanity. It's deffo a no Quote Link to post Share on other sites
Haystakk Posted January 30, 2008 Report Share Posted January 30, 2008 (edited) My; how can an Aug be ugly, but beautiful at the same time! Looks great Swerve - is that one coming to GMA in a couple of weeks? Edited January 30, 2008 by Haystakk Quote Link to post Share on other sites
Swerve Posted January 30, 2008 Report Share Posted January 30, 2008 Oh yes! She'll be there, probably end of Feb though as too many pennies have been spent! Quote Link to post Share on other sites
Haystakk Posted January 30, 2008 Report Share Posted January 30, 2008 Look forward to seeing it. Quote Link to post Share on other sites
Donut Posted January 30, 2008 Report Share Posted January 30, 2008 Well, I just got done converting it to the SMG >:3 JG AUG base Quote Link to post Share on other sites
ianhaz Posted January 31, 2008 Report Share Posted January 31, 2008 Is that the beginnings of a 9mm mag adapter i see there Donut? I was going to do something similar to a CA AUG, but aborted in favour of an AR15 project. Never the less id love to see it completed Quote Link to post Share on other sites
Donut Posted January 31, 2008 Report Share Posted January 31, 2008 90% Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.