the_governator Posted March 31, 2007 Report Share Posted March 31, 2007 (edited) my m14. proarms woodstock. guarder ftk g&p ras. g&p m3. kingarms bipod. Edited March 31, 2007 by the_governator Link to post Share on other sites
evilliboba Posted March 31, 2007 Report Share Posted March 31, 2007 Lose the RAS and it would be nice. Paging all M14 internal experts. Help. I know it is vague but can some one tell me how an M14's selector system works? I have no idea... Link to post Share on other sites
[BS]_MARS Posted March 31, 2007 Report Share Posted March 31, 2007 (edited) I suppose this is the best place to ask, excuse me if this doesn't belong here Would this stock fit on a Mk14 chasis? With the top rail removed ofcourse. It should, since the Mk14 is compatible with 870 stocks, right? <{POST_SNAPBACK}> It should fit but I doubt these manufactures have their sh*t together enough to make it precise enough to truly fit. I don't think the motor would fit in there either. If you don't already have the kit, here is another option: http://www.airsoftextreme.com/store/index....roducts_id=3122 Edited March 31, 2007 by [BS]_MARS Link to post Share on other sites
tom lawson Posted March 31, 2007 Report Share Posted March 31, 2007 hmm, i have a few ebr questions... if uve got 1, was it worth it? i mean, it looks badass but is it really worth spending $500 ish to just change the pistol grip, add a few ras rails etc.. also, how easy is it to change the battery on them? is there a door or similar where u can swap it in/out quickly? or do u have to unscrew some *beep*? also, how hard is it to install? (the g&p version) also again, does ne1 know the difference between http://www.wgcshop.com/pcart/shopper.php?i...-SK-08_srch_m14 and http://www.wgcshop.com/pcart/shopper.php?i...SK-08A_srch_m14 ? cos apparently its only the grip thats different in the cheaper 1... and out of g&p and king arms, which is better? a lot of questions i know, and any answers would be greatly appreciated!!!! cheers, tom Link to post Share on other sites
FarEast Posted March 31, 2007 Report Share Posted March 31, 2007 This thread needs more M14's of all flavours...so here is 3 in one shot! Link to post Share on other sites
master_titled Posted March 31, 2007 Report Share Posted March 31, 2007 This thread needs more M14's of all flavours...so here is 3 in one shot! http://img301.imageshack.us/img301/8699/p1...24mediumwo5.jpg <{POST_SNAPBACK}> Now all you need is a SOPMOD M14 Link to post Share on other sites
j3T Posted April 1, 2007 Report Share Posted April 1, 2007 It should fit but I doubt these manufactures have their sh*t together enough to make it precise enough to truly fit. I don't think the motor would fit in there either. If you don't already have the kit, here is another option: Ah darn, the motor goes in there? I have an M14 on the way, but I've never held one or seen it on the inside I was thinking of buying the G&P silver Mk14 kit, this stock, and add a Magpul MIAD and CTR to it. But I guess I'll have to drop the stock plan... And the silver G&P Mk14 kit seems to be near impossible to find as well Link to post Share on other sites
1cem4n Posted April 1, 2007 Report Share Posted April 1, 2007 so does the Magpul MIAD work with the G&P EBR stocks? Link to post Share on other sites
gun5h311 Posted April 1, 2007 Report Share Posted April 1, 2007 (edited) hmm, i have a few ebr questions... if uve got 1, was it worth it? i mean, it looks badass but is it really worth spending $500 ish to just change the pistol grip, add a few ras rails etc.. also, how easy is it to change the battery on them? is there a door or similar where u can swap it in/out quickly? or do u have to unscrew some *beep*? also, how hard is it to install? (the g&p version) also again, does ne1 know the difference between http://www.wgcshop.com/pcart/shopper.php?i...-SK-08_srch_m14 and http://www.wgcshop.com/pcart/shopper.php?i...SK-08A_srch_m14 ? cos apparently its only the grip thats different in the cheaper 1... and out of g&p and king arms, which is better? a lot of questions i know, and any answers would be greatly appreciated!!!! cheers, tom <{POST_SNAPBACK}> Hi Tom, Maybe I can answer some of your questions. Is it worth it? I think so, I've been in and out of airsoft for close to 8 year now, and every gun I built has cost almost 1k USD. So at the end it will cost much as any M4 that's been tricked out. Currently on the market are 2 Types of EBR Kits, the Regular EBR and the Seal's MK14 mod 0 EBR. The Seal's is 1 inch shorter, not the barrel but the body and rail, and maybe a little lighter and is only made by G & P right now. the regular EBR is made by TGS and King Arms. The TGS can hold a Large type battery. the king Arms can not however the king arms has a full lengh RAS from Mag to Barrel allowing you to use vertical grips. The battery swap on on all EBRs are a pain. Check G&P's website they have instructions on how to install their kit. It seems a little complex. Compaired to my TGS kit. I haven't seen the King Arms kit yet. G&P and King Arm is asking if you like Which type of EBR... Little Google goes along way. Edited April 1, 2007 by gun5h311 Link to post Share on other sites
Jagdraben Posted April 1, 2007 Report Share Posted April 1, 2007 so does the Magpul MIAD work with the G&P EBR stocks? <{POST_SNAPBACK}> It shouldn't, unless G&P is making an EBR-CQC conversion kit. Link to post Share on other sites
evilliboba Posted April 1, 2007 Report Share Posted April 1, 2007 Does anyone know where I can buy this M14 part? I can not find the darn thing anywhere... Link to post Share on other sites
Carbine Posted April 2, 2007 Report Share Posted April 2, 2007 For some reason the Guarder cut-off lever is not available at any of the online retailers yet. That's too bad considering the stock piece will fail with upgrades, especially if you use Guarder gears. Link to post Share on other sites
evilliboba Posted April 2, 2007 Report Share Posted April 2, 2007 For some reason the Guarder cut-off lever is not available at any of the online retailers yet. That's too bad considering the stock piece will fail with upgrades, especially if you use Guarder gears. <{POST_SNAPBACK}> Darn... My AGM one is already dead after about 1000 rounds. Link to post Share on other sites
massacreman Posted April 4, 2007 Report Share Posted April 4, 2007 (edited) My AGM Edited April 4, 2007 by massacreman Link to post Share on other sites
pvt_emu Posted April 4, 2007 Report Share Posted April 4, 2007 (edited) After have been reading this thread for ages, i final managed to get a TM M14 Wood Version (just std, but soon whit a Guarder M120 tune kit) Edit: I forgot to say that the stripper loader, has fallen of. (i've bought it used) Pics: The image quality sucks, but i only have my phone to take pics. Hope you like em. Edited April 4, 2007 by pvt_emu Link to post Share on other sites
massacreman Posted April 4, 2007 Report Share Posted April 4, 2007 Hey guys i was wondering what silencer you would recommend for my m14. I don't really want a long one but weight isn't really a problem. or would I be better off making my own custom one. Thanks. Link to post Share on other sites
evilliboba Posted April 4, 2007 Report Share Posted April 4, 2007 Darn... My AGM one is already dead after about 1000 rounds. <{POST_SNAPBACK}> I found one! On order right now. Link to post Share on other sites
Hauk Posted April 4, 2007 Report Share Posted April 4, 2007 A new AGM rifle or a replacement part? Hauk Link to post Share on other sites
evilliboba Posted April 4, 2007 Report Share Posted April 4, 2007 A new AGM rifle or a replacement part? Hauk <{POST_SNAPBACK}> The part. That and some steel bushings. Throw in a Guarder Bucking, CA stock spring (maybe) and a stock CA piston head. I should have a smooth beast once it is done. Link to post Share on other sites
gafes Posted April 5, 2007 Report Share Posted April 5, 2007 The part. Where did you find the part?, i been looking for it for a while ago. Link to post Share on other sites
evilliboba Posted April 5, 2007 Report Share Posted April 5, 2007 Where did you find the part?, i been looking for it for a while ago. <{POST_SNAPBACK}> http://www.airsoftadvantage.com/product_in...products_id=857 Link to post Share on other sites
massacreman Posted April 6, 2007 Report Share Posted April 6, 2007 Guys what do you think of this silencer for my m14? http://www.airsoftgames.com/king-arms-245m...ncer-p-131.html and has anyone bought from this retailer before? Link to post Share on other sites
tom lawson Posted April 6, 2007 Report Share Posted April 6, 2007 yeah, ive bought from steve... i went in person, but hes a good bloke and wont screw u over.. its a cool silencer, and would look good on an m14 i think.. up to u tho Link to post Share on other sites
massacreman Posted April 6, 2007 Report Share Posted April 6, 2007 yeah, ive bought from steve... i went in person, but hes a good bloke and wont screw u over.. its a cool silencer, and would look good on an m14 i think.. up to u tho <{POST_SNAPBACK}> Ok thanks, think i'll place an order later. Link to post Share on other sites
bilabong32 Posted April 6, 2007 Report Share Posted April 6, 2007 I'm not sure if this has been posted yet but check out this new stock. http://www.jallenenterprises.com/html/jae_home.html Link to post Share on other sites
Recommended Posts