Jump to content
baias6230

1911 Picture Thread

Recommended Posts

Just to pass on alittle custom job ive done recently regarding sights...

 

If you own a Marui VSR sniper rifle or know someone who does, They will usually dispense with the iron sights and fit a scope, sooo here's a neat way to use the now none used, rear iron sight:

post-42289-1246907044_thumb.jpg

 

Alittle bit of cutting and sanding is all that's needed, oh and a screw that fits the thread in the blowback housing...simple.

Edited by MrManiac

Share this post


Link to post
Share on other sites

Anyone have pictures of a 1911 with a m6 or an m6 light? I'm looking into purchasing a light for my TM MEU, but I'm not sure what to get. Thanks in advance!

Share this post


Link to post
Share on other sites

Possibly my favorite 1911 in this thread Billy_Bob. Looks amazing. I have those same grips on my MEU and love them

 

Ive always loved Kimbers(Kinbers in airsoft xD), also, more pics, Holmes =P

Edited by Mr Foxhound

Share this post


Link to post
Share on other sites
Ive always loved Kimbers(Kinbers in airsoft xD), also, more pics, Holmes =P

 

I will for sure once I get another shoot up and running. My Kimber is my only gun right now (ICS MP5 and M4 are long gone), and with my recent photography hobby, I've just realized how much fun it is to get closeups of.

Share this post


Link to post
Share on other sites

Share this post


Link to post
Share on other sites

FFS!!

Congratulations, you have just ruined this page of the 1911 thread.

At least re-size them...and take a look at the rules while you're at it.

 

Very nice Wilson atz.

Edited by chris u'5

Share this post


Link to post
Share on other sites

Give the guy a break clearly he's very happy with his 1911...the superior gbb model in the airsoft world! Love yours by the way billy bob, it's similar-ish to mine (but yours is nicer)

Share this post


Link to post
Share on other sites

Repainted. Bake-on hi-temp paint apparently works wonders durability-wise (used as cheap substitute for alumahyde or duracoat for real guns). But paint manufacturers really shouldn't label their cans "flat black" if they aren't truly, well, "flat". <_<

100_1538.jpg

Looks like its been held by some galoot with big, burly, sweaty mitts.

Share this post


Link to post
Share on other sites

Got some new pictures of my Marui MEU. So far:

 

TM MEU

Guarder Springfield metal body kit

Guarder 150% recoil spring kit

PDI 6.01 6-inch inner barrel

Creation metal outer barrel

PDI 14mm- silencer attachment

G&G SS-100 silencer

 

 

Also, has anyone had experience with the PDI 14mm silencer attachment? It stays put after tightening the 3 little screws, but it always comes loose and slides right off when I fire the gun or rack the slide. Any advice?

 

 

(excuse the greasy look, since I had just finished installing everything and was so excited to take a picture :) )

P1010286.jpg

 

P1010285.jpg

Edited by suoires

Share this post


Link to post
Share on other sites
True, but why do we need to see a 1200x1600 picture of a gas fill valve on a china pistol?

 

 

lol I have been running into a lot of elitist folks like you when showing my Chinese made clone. If you want to spend $300 on a fake gun that is made in Japan, congrats and good for you. But note: most people have better places to put money like that, especially in US, where you can get a Springfield GI for $400.

 

That goes for others here too, go deck out your guns all you want, but don't brag and look down upon Just because it's cheaper. It being made in China doesn't make it any less of a toy than your $300 gun that shoots 6mm plastic bbs.

Edited by KUNFUCHOPSTICKS

Share this post


Link to post
Share on other sites

i promise to fire up a nikon d40 shot of my 1911s once i get this kink worked out. ive posted on the just handguns topic but i think i could use some help here as well.

 

instead of reposting and clogging up two threads, ill just leave a link to the thread:

 

http://www.arniesairsoft.co.uk/forums/inde...howtopic=170840

 

i have some fitment issues with a pgc kit for a TM 1911A1 as expected. if someone could enlighten me on these fixes, thatd be greatly appreciated. thanks guys

Share this post


Link to post
Share on other sites

A proper 1911, upgrades are too much to list, so here's what's not upgraded:

 

Slide stop (have to mod to make it work properly)

Inner barrel assembly (just the unit is stock, the inner barrel is a custom cutted PDI 6.01 along with CP custom rubber)

 

Everything else on the gun is be upgraded, this thing shots 365 FPS using just green and 0.20bbs.

 

Pics:

DSC05405.jpg

 

God I love the Ed Brown's memory grip safety:

DSC05401.jpg

 

thanks for looking

Edited by wwjkc

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.