hwagan Posted September 6, 2013 Report Share Posted September 6, 2013 I have no choice in the mags, its the only mag that I know of that works in a WA based gun that isn't complete poo and doesn't cost an arm and a leg. As for the torch, I have no idea, it's just a China clone I bought off a friend. The gun is a just a cheap fixer upper I got off a buddy, it's basically an AGM with some upgrades. Works well enough and shoots like a boss. Thank you kindly. Next project is a MK 18 Mod 1 upper receiver. Not sure if it'd work out economically for you, but G&P Pmags have always been fantastic for me - Very simple design, PTS licensed Pmag replicas and they're £45 from AirsoftZone, although the international shipping might kill the price... Saying that, trying the GHK G5 mags in my WA's, they definitely punch a little harder than the G&P mags. Quote Link to post Share on other sites
Legionnaire759 Posted September 6, 2013 Report Share Posted September 6, 2013 Judging from the length it looks like a M951. Its actually an M961. The Surefire M951 is shorter and stubbier. Quote Link to post Share on other sites
Jimmypie Posted September 6, 2013 Report Share Posted September 6, 2013 Added a suppressor and trying out with my different lower, 3 Quote Link to post Share on other sites
The Reptile House Posted September 6, 2013 Report Share Posted September 6, 2013 I like the contrasting paint jobs upper and lower, Jim. My current WIP, just missing a DBAL and some hard use to get it nicely weathered: 2 Quote Link to post Share on other sites
charlie 6 Posted September 7, 2013 Report Share Posted September 7, 2013 Its actually an M961. The Surefire M951 is shorter and stubbier. Thanks for the heads up. My bad, typo. Looking good reptile! Loving the rail. 1 Quote Link to post Share on other sites
hwagan Posted September 7, 2013 Report Share Posted September 7, 2013 (edited) SILENCE ALL OF THE GUNS. Also swapped the OD over to the MRP because I like it, needs an OD Ergo F93 now to finish it off. The G&P KAC Can is now JimmyPie's, but the second gun will be getting a 51T so I can use the M42000 on both. Edited September 7, 2013 by hwagan 4 Quote Link to post Share on other sites
The Reptile House Posted September 7, 2013 Report Share Posted September 7, 2013 Sexed up. 2 Quote Link to post Share on other sites
hiawatha Posted September 7, 2013 Report Share Posted September 7, 2013 ptw FCC racetriggerMagpul finger guardMagpul ASAP slingmountMagpul Moe gripMagpul CTR stockVLTOR buffertueFCC outer barrel, many lengthsDYTAC UXR 3 12,5 FCC 2.0 motorKastman HopModify rubber and flatnubPrometheus 6.05, 407mm inner barrelE-TINY electrics Shoots like a dream 3 Quote Link to post Share on other sites
uscmCorps Posted September 7, 2013 Report Share Posted September 7, 2013 Quick question. FCC. Where are they based out of and are they the go to source for PTW components? I'm finally, after holding out for many years, considering the PTW after trying a student's gun. 1 Quote Link to post Share on other sites
abbadon101 Posted September 7, 2013 Report Share Posted September 7, 2013 FCC are based in HK and make aftermarket parts for PTWs, they also make all their own components so it is possible to have a 100% FCC PTW. I owned one of their 416 kits and the quality was amazing. But I have no idea on the quality of their internals. Quote Link to post Share on other sites
Leon Kennedy Posted September 7, 2013 Report Share Posted September 7, 2013 (edited) New paint. Surefire suppressor is coming sometime soon. Then Hwagan and I can be suppressor buddies. [/url] Edited September 7, 2013 by Leon Kennedy 5 Quote Link to post Share on other sites
whiteknight Posted September 8, 2013 Report Share Posted September 8, 2013 SILENCE ALL OF THE GUNS. Also swapped the OD over to the MRP because I like it, needs an OD Ergo F93 now to finish it off. The G&P KAC Can is now JimmyPie's, but the second gun will be getting a 51T so I can use the M42000 on both. very nice Quote Link to post Share on other sites
hwagan Posted September 8, 2013 Report Share Posted September 8, 2013 New paint. Surefire suppressor is coming sometime soon. Then Hwagan and I can be suppressor buddies. Where'd you manage to find a Surefire one? One of the ACM jobbies or a Madbull? I was tempted by one of the replicas but I've proper fallen in love with this here AAC one.. very nice Thanks man! Although in future, remember to delete the pics when you quote a post just to save 'em showing twice on the same page! Quote Link to post Share on other sites
afallan Posted September 8, 2013 Report Share Posted September 8, 2013 SILENCE ALL OF THE GUNS. Also swapped the OD over to the MRP because I like it, needs an OD Ergo F93 now to finish it off. The G&P KAC Can is now JimmyPie's, but the second gun will be getting a 51T so I can use the M42000 on both. For those of you with the G&P KAC Suppressors; are yours loose? I mean when I attach my onto the supplies KAC flash hider, there's a bit of wobble and it doesn't feel as secure as the Magpul PTS AAC silencer. How do you go about remedying this? Quote Link to post Share on other sites
hwagan Posted September 8, 2013 Report Share Posted September 8, 2013 For those of you with the G&P KAC Suppressors; are yours loose? I mean when I attach my onto the supplies KAC flash hider, there's a bit of wobble and it doesn't feel as secure as the Magpul PTS AAC silencer. How do you go about remedying this? Pick up a few thin cross section O-rings the same outer diameter as the flash-hider - Pop one into the can, just behind the anti-rotation post - It'll be a little more difficult to attach the silencer due to the fact you're compressing an O-ring, but it should make it nice and solid. Saying that, mine has been on a Birdcage flash-hider for a while, and it obviously rotates and it's not rock solid, but with the foam gone the BB doesn't clip the edges at all. Quote Link to post Share on other sites
The Reptile House Posted September 8, 2013 Report Share Posted September 8, 2013 New paint. Looking good. What did you use for the scales, Leon? Quote Link to post Share on other sites
Leon Kennedy Posted September 8, 2013 Report Share Posted September 8, 2013 (edited) Where'd you manage to find a Surefire one? One of the ACM jobbies or a Madbull? I was tempted by one of the replicas but I've proper fallen in love with this here AAC one.. I honestly don't know. I bought it from Taco of ASB from his parted out 416 for $30, so I'll make due with whatever it is. Looking good. What did you use for the scales, Leon? Walmart laundry bag. $3, reusable. Pretty fine mesh; I just put the gun itself into the bag and tightened it all up so it laid flat. This was sort of a reverse paint job; usually I paint a tan base coat, then do a brown spray over it (so the scales are light) but since I was painting over my old foliage job, the scales became dark. I like it, especially once it wears down. Edited September 8, 2013 by Leon Kennedy 2 Quote Link to post Share on other sites
The Reptile House Posted September 8, 2013 Report Share Posted September 8, 2013 I have something similar, thanks. Yeah - I like the dark scales. Awesome job. Quote Link to post Share on other sites
Leon Kennedy Posted September 8, 2013 Report Share Posted September 8, 2013 Thanks man, I appreciate it. I also own the 9" RIS II; I have an 11.5" barrel coming, and am gonna try the same setup but shorter once the suppressor comes. With the can on the end, the gun is a little long, and it's not really plausible with my local fields to tune the gun to DMR specs. 1 Quote Link to post Share on other sites
blarock86 Posted September 8, 2013 Report Share Posted September 8, 2013 New paint. Surefire suppressor is coming sometime soon. Then Hwagan and I can be suppressor buddies. pics pics pics You are missing something at the back of the receiver And mine: Quote Link to post Share on other sites
Leon Kennedy Posted September 8, 2013 Report Share Posted September 8, 2013 You are missing something at the back of the receiver It went MIA at an OP in June and I never got around to finding another! Changed the rail while I wait for the barrel. I oddly like it. Also, glitter'd that *badgeress* up. 1 Quote Link to post Share on other sites
-wigs- Posted September 9, 2013 Report Share Posted September 9, 2013 Stripped the paint off my upper today for that dropped in look. Left the Peq, light, and front sight painted and naturally wearing 1 Quote Link to post Share on other sites
BigAl Posted September 9, 2013 Report Share Posted September 9, 2013 Thought i'd try these new fangled angled ironsights for when dot sight craps out, just got em today. The buggers don't fit on a VLTOR Upper! Quote Link to post Share on other sites
validtumoralarm Posted September 10, 2013 Report Share Posted September 10, 2013 I think I may have the only one of these on Arnies at the moment. G&P based Colt lower, Barrett Rec7 upper. Would have gone full Barrett, but I like the G&P base gun way too much. I've gotten tired of military impressions and decided to emulate some of my favorite fictional characters instead. 1 Quote Link to post Share on other sites
-MOOSE- Posted September 10, 2013 Report Share Posted September 10, 2013 And for those of us not in the know, which fictional character has this weapon? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.