Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation since 03/19/2023 in Posts

  1. L7A2 GENERAL PURPOSE MACHINE GUN WARNING.... EXTREMELY LONG READ!!! I've tried to keep this as short as possible without losing too much needed info. A even deeper version will have a page made with a link posted in weeks to come, which will also focus on the early FN and newer HK versions. This is a complete custom build, made of full steel, and is currently 99.9% accurate to a real L7 I know that for some of you, who have seen some of this build before, we’re covering old ground - but please don’t run away just yet! Now, with the final piece of my puzzle, an accur
    9 points
  2. Took long enough, but it's finally here. I made a review for my team channel, figured those of you still hanging around Arnie's might find it useful:
    8 points
  3. So the t4ehdrs68 is a 68 cal paintball revolver made by umerex. I was wondering if it would accept aps shotgun shell wads alowing you to use it as an airsoft shotgun. Curiosity got the better of me and it arrived today. I can confirm that the flower wads do not fit, the standard wads will fit if you trim around 2mm off the leading edge with a pair of scissors and the short wads should work without any modification. I found that you can fit 11bbs in each chamber and the cardboard plugs hold them in very securly. The revolver fires the wads and bbs flawlessly and i have to say although its not s
    7 points
  4. My VFC MP5K-PDW GBB v2 all dressed up
    6 points
  5. Hey again! Here is my Viper Tech GBBR with VLTOR MUR-1A style upper, Z-Parts VLTOR style 19mm BCG and a whole bunch of RS accessories! Sights, rail, furniture, CH and trigger guard as well as the buffer tube is all RS. Spent way too much on this thing, but I am in love!
    6 points
  6. Done the same with my tm/guarder kit. Grips took a bit of work. But looks so much better and also added the early style front and rear sights too. Just need to fix the markings and make them period correct.
    6 points
  7. My VFC HK53 GBBR with a H&K claw mount with an Aimpoint 5000 and a Surefire torch handguard
    5 points
  8. A new one to the collection. Finally got my hands on the Daves custom airsoft L129A1 The real rifle is a Lewis Machine & Tool (LMT) 7.62mm sharpshooter rifle. The British then gave it the designation L129A1. It features *LMT crane stock *LMT rail panel *LMT sling point *LMT Ergo grip *KAC flip up sights *Harris bipod with A.R.M.S QD mount *Surefire FH762K05 flash hider *TDI arms FFGB2 folding grip Most models came with the *Trijicon Acog 6x48 BAC .308 scope. But some others were also fitted with the
    5 points
  9. Been ages since posting pics, but been sorting through the collection/building some SLR AR's and finally got a nice shot
    4 points
  10. I'd post in the HK thread, but this one is less used
    4 points
  11. Some old-school cool. TM P226 E2 with PGC non-rail kit, RS mainspring seat and Hogue wrap-around rubber grips with finger grooves, and Guarder everything.
    4 points
  12. After so many years of waiting, finally got a steel M&P9L build thanks to Guarder's recent release.
    4 points
  13. My small collection of primary British personal weapons from WW2 to now. ARES Lee Enfield No4 Mk1* Northeast STEN Mk2 ARES L1A1 SLR S&T L2A3 SMG WE Browning Hi Power Mk3 G&G L85A2 (an L85A1 when originally purchased in 2005)
    4 points
  14. Q HONEY BADGER Kit, under build Still ordering RS accessory parts from Q-LLC (HB Stock assembly, 12" barrel, Barrelnut, adjustable gas-block, turnbucle, etc.) Great things to come
    4 points
  15. Maruzen finally bringing out a Walther PPK so everyone can pretend they're James Bond. Thank you Maruzen. Very cool. 18 BB mag capacity. About $160. Available Feb/March 2024.
    3 points
  16. LCT G3 Real parts: Flashider/ furniture / sights / pins Lonex upgraded internals VFC claw mount, vintage Bushnell Sportveiw glass
    3 points
  17. LCT G3 Real parts: Flashider/ furniture / sights / pins Lonex upgraded internals VFC claw mount, vintage Bushnell Sportveiw glass
    3 points
  18. Ok, it took me a while but I finally decided to get a Mk III, and here is what I think of it. All in all, it feels much better than the earlier model with the tangent sight, much snappier to fire and has a much crisper recoil. Much nicer. Most of the stuff that I don’t like about this pistol are the fault of the design that WE copied from Tanaka, as with the earlier model, the absence of adjustable hop is just so beguiling. I know that removing the barrel from the slide is an absolute pain, so the grub screw in the top was never the best hop adjustment to begin with, and unless I hav
    3 points
  19. Nothing especially noteworthy, just a VFC HK417 with some accessories and a truly horrific paintjob. UKSF fellas seem to like their Kryptek paint schemes, so off I went. I "retired" from machine gunning due to a back injury, but I still had a hankering for some sort of special-purpose weapon. This is my first DMR and it's quite lovely to use.
    3 points
  20. Bit of an update, I went ahead and did it, hardly had to file anything away to fit the longer barrel through. I'm using 2 10mm o rings to support the front of the barrel within the outer barrel. The 220mm Crazy Jet barrel is a perfect fit, ending just inside the CCW thread. With the space I have I can't comment on any increased range or accuracy, but certainly the accuracy is still as dead on as stock. I have added a Maple Leaf deception 50 bucking with the Maple Leaf nub, when I next go skirmishing I will be able to dial in the hop and see what it can do, as well as chrono.
    3 points
  21. SCOPES So last few months have been working on making some of the airsoft clone sights like the SUSAT's look more realistc. I've owned at somepoint every brand of SUSAT out there. And I can safely say that the ARES are the best in external quality as you're going to get. The G&G one is ok, and also has a working red reticle. But still can see it's a clone a mile away. The other clones I personally would never touch again with a barge pole. Now I understand that the ARES is the most expensive, where some people are restrained by finances, or aren't interested tha
    3 points
  22. L9A1 Browning HI power MKII This was the WE version. This was made some years ago long before WE released their MK3 model. for this MK2 build I removed the original gp35 style rear sight. Filled the gap with quiksteel, then smoothed down the upper to match the slimmer (later) profile. I then added a genuine sights, sling loop and real mk2 grips. I then went and had the correct L9 markings added to both upper and lower. Only issue was they were supposed to fully engrave it. But wires got crossed and they only laser engraved it. But will just have
    3 points
  23. Vipertech M16A4 GBBR with an Eotech 512 HWS + some real steel accessories
    2 points
  24. My new Mp5K PDW. CM.041L UPGRADED VERSION [CYMA]
    2 points
  25. Oh hey, thanks for sharing it. Totally forgot to post the video here. In the two months since I uploaded that video the guns have still been going strong. There are currently four M249s in my local community, and the two most frequent users have both surpassed the 20K mark with no apparent signs of degradation. I'm quite disappointed that the cassette mags are so half-assed, and the gas box has all the normal problems with using gas guns on full auto, but converting to AEG boxes and HPA is really, really easy and massively elevates the gun. I should also share that since uploadi
    2 points
  26. Asahi WA2000 DX in mint condition and 3 Mags. Also, a real WA2000-spec accurate Schmidt & Bender 56mm scope. I plan to have a mount replicated like the real one for use of the scope similar to the mount in the picture
    2 points
  27. Since most of these fall into lots of different categories, was easier just to start a new one covering them all. Anyone is welcome to post aslong as it has seen use in or is issued within the British Forces Or UKSF. My British collection so far. Law 66 L115A1 L100A1 L85A2/L123A2 l85A2 TES L128A1 shotgun L74A1 L91A1 L7A2 GPMG L108A1 L1A1 Colt model 715 (C7) L119A1 SFW L119A1 CQB L92A1 embassy seige. L131A1 L105A2 L9A1 L85A2 (3 Para 2008) Colt model 725 (C8) L105
    2 points
  28. Looks to be confirmed, APS re-posted an image of it on their Instagram/Facebook. https://www.facebook.com/AirsoftAPS/posts/847491347385732 https://www.instagram.com/p/Cy5awFJyTUQ/?utm_source=ig_web_button_share_sheet
    2 points
  29. Hi, Here are my DUAL Full Custom Top-Tier Glocks : - RWA Agency Arms G34 FATAL Edition - RWA Agency Arms G17 Urban Combat 2.0 SEE Full Build "from scratch" available here : - [RWA AGENCY-ARMS] GLOCK 17 Urban Combat 2.0 > Full Custom =>Link - [RWA AGENCY-ARMS] GLOCK 34 FATAL > Full Upgrade =>Link GLOCK 17 Urban Combat 2.0 : Full Gunsmodify - Full Steel Internals, Steel Front base, Steel Hopup unit, Steel Hammer housing/ PDI Inox 6.01 118mm + Ice Pick Gold Poseidon/ Gunsmodify Nozzle V2 CO2, Gunsmodify Stippled frame AA Style, RS Agency-Arms (Magwel
    2 points
  30. And finally the end of the silenced ones. That's all folks!
    2 points
  31. My ARES Lee Enfield No4 Mk1* alongside my deactivated 1942 dated Savage No4 Mk1*
    2 points
  32. Haven't posted here in a long time, I'll restart with this Scored a steel version Bear Paw SVU GBB a while ago and wanted something special in regards of optics for it. Looked around a bit and finally got my hands on a rare 1P21 scope - very large russian scope that has been used on the SVD. I'm not sure if any of these have ever been used on the real SVU, standard for this was the PSO-1 scope. It's also not possible to mount large scope mounts like the one of the 1P21 on an SVU without disassembling it, as these are pushed onto the side rail from the rear, which can't be
    2 points
  33. The BL Tech BOSS unit was a very interesting piece of gear that was shown off years ago with a lot of hype but it seemed they turned their back on the airsoft market with hopes of getting government contracts iirc. It seems they're now back with a new name and the implied possibility of sales to your average airsofter.
    2 points
  34. There's of course nothing for me to add with @CatgutViolin's incredible video, but here are some pictures of mine!
    2 points
  35. FB is killed forum platform.... FB is fast and covinice for... fast , really hard to find old answer, or when the group die. everything is dissapear with it. I still like use Forum. although here is very few people now, but when you want to search something, answer still at here. It's like a museum with no customer now xD.
    2 points
  36. Worth a punt on Cyma. They were always very rock solid in my LCTs, so could be in the larger side?
    2 points
  37. Hey, man. I don't know what kind of laser engraving you are going to get, but most only give you the type you already have with those phony USMC markings, barely taking the paint off and revealing the metal underneath. If you want to get actually metal engraving, as in deep cuts, you can take your receiver to a metal engraver, the ones you hire to engrave sports trophies or hunting knives. The Diemaco logo will be extra though, as they will need to make a custom pattern. However, if you get crisp laser surface engraving, you can then use the 9V etching method to get deep cuts into t
    2 points
  38. Now I am working with a new frame SCW3 type from Prime. I have a custom hammer and trigger set custom made by Ninjya from Japan that is custom made for my frame. As you can see, I checkered the trigger guard and plan to do the strap next This is the hammer set with a unique valve knocker that never recesses until the hammer is pushed back, making the power levels go up in crazy numbers. Sadly you can't drop the hammer unless the mag is out or there is no gas. The hammer, valve knocker, and disconnector set one-off for the frame.
    2 points
  39. I think I am going to take a crack at the MK22. MGC M459 as a base and stock, locking mechanism and barrel custom made in Japan. I was not impressed by the Show Gun MK22. I wouldn't recommend it for that price.
    2 points
  40. Joining in with a Dominator M870 + wood kit. Really like that one, steel all the way!
    2 points
  41. L119A1 SFW & CQB Both of these are AEG's So lets go from tip to toe.... With the SFW first then CQB BARREL SFW The barrel on this is a rare (unknown brand) Steel with stampings. The heavy section of this barrel is a collar and can be removed, so had a more accurate collar made. The flash hider unfortunately for now is a TM aluminium one, where i am hoping to be able to source 2 steel 14mm negative flash hiders for both of these. Gas block is an original Army Code steel one, not the later Warlord tactical one. This also has a real circul
    2 points
  42. South African Railways Police
    2 points
  43. Finally got this after a long ordeal of shipping horrors and german bureaucracy... Tokyo Marui Springfield V10 GBB with all the bells and whistles from Guarder's stainless steel program: Slide, outer, frame, hammerspringhousing, slidecatch, hammer, safety, gripsafety in stainless steel, front and rear sight in steel. Plus Kimpoi wood grips with Springfield logo.
    2 points
  44. As some of you already surmise, I sold my dignity and purchased something from Cybergun. As the only Tommy GBBR I felt my wallet cornered though to be fair this is not my first CG purchase as I also got the WE/CG Desert Eagle last year so you could say I didn't have any self respect in the first place. So with that, on to the review. The gun is a truly open bolt submachine gun with select fire capability doing about 330fps (30C) at around 850rpm. When out of bbs the bolt locks to the rear until a loaded magazine is inserted and the charging handle pulled back. It is full metal with the ma
    2 points
  45. 2 points
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.