Leaderboard

Took long enough, but it's finally here. I made a review for my team channel, figured those of you still hanging around Arnie's might find it useful:

dNa M16A1 carbine + Aimpoint 5000

My VFC MP5K-PDW GBB v2 all dressed up

So the t4ehdrs68 is a 68 cal paintball revolver made by umerex. I was wondering if it would accept aps shotgun shell wads alowing you to use it as an airsoft shotgun. Curiosity got the better of me and it arrived today. I can confirm that the flower wads do not fit, the standard wads will fit if you trim around 2mm off the leading edge with a pair of scissors and the short wads should work without any modification. I found that you can fit 11bbs in each chamber and the cardboard plugs hold them in very securly. The revolver fires the wads and bbs flawlessly and i have to say although its not s

My VFC HK53 GBBR with a H&K claw mount with an Aimpoint 5000 and a Surefire torch handguard

Hey again! Here is my Viper Tech GBBR with VLTOR MUR-1A style upper, Z-Parts VLTOR style 19mm BCG and a whole bunch of RS accessories! Sights, rail, furniture, CH and trigger guard as well as the buffer tube is all RS. Spent way too much on this thing, but I am in love!

A new one to the collection. Finally got my hands on the Daves custom airsoft L129A1 The real rifle is a Lewis Machine & Tool (LMT) 7.62mm sharpshooter rifle. The British then gave it the designation L129A1. It features *LMT crane stock *LMT rail panel *LMT sling point *LMT Ergo grip *KAC flip up sights *Harris bipod with A.R.M.S QD mount *Surefire FH762K05 flash hider *TDI arms FFGB2 folding grip Most models came with the *Trijicon Acog 6x48 BAC .308 scope. But some others were also fitted with the

Been ages since posting pics, but been sorting through the collection/building some SLR AR's and finally got a nice shot

Haven't posted for a while. So time for a small update. First up, after years of looking. I have finally got my hands on a S&T L2A3 Sterling SMG. A few bits will need sorting. And so far have managed to source a real end cap and sling. Just need to source one or two more parts before I eventually start work on it. I have already started on the mags and making them look close to the real thing. Will do a full write up once the build is coming along. Update 2 The L115A3 has come along further. I've now m

Maruzen finally bringing out a Walther PPK so everyone can pretend they're James Bond. Thank you Maruzen. Very cool. 18 BB mag capacity. About $160. Available Feb/March 2024.

I'd post in the HK thread, but this one is less used

Some old-school cool. TM P226 E2 with PGC non-rail kit, RS mainspring seat and Hogue wrap-around rubber grips with finger grooves, and Guarder everything.

After so many years of waiting, finally got a steel M&P9L build thanks to Guarder's recent release.

My small collection of primary British personal weapons from WW2 to now. ARES Lee Enfield No4 Mk1* Northeast STEN Mk2 ARES L1A1 SLR S&T L2A3 SMG WE Browning Hi Power Mk3 G&G L85A2 (an L85A1 when originally purchased in 2005)

L7A2 GENERAL PURPOSE MACHINE GUN WARNING.... EXTREMELY LONG READ!!! I've tried to keep this as short as possible without losing too much needed info. A even deeper version will have a page made with a link posted in weeks to come, which will also focus on the early FN and newer HK versions. This is a complete custom build, made of full steel, and is currently 99.9% accurate to a real L7 I know that for some of you, who have seen some of this build before, we’re covering old ground - but please don’t run away just yet! Now, with the final piece of my puzzle, an accur

Vipertech M16A4 GBBR with an Eotech 512 HWS + some real steel accessories

LCT G3 Real parts: Flashider/ furniture / sights / pins Lonex upgraded internals VFC claw mount, vintage Bushnell Sportveiw glass

LCT G3 Real parts: Flashider/ furniture / sights / pins Lonex upgraded internals VFC claw mount, vintage Bushnell Sportveiw glass

Ok, it took me a while but I finally decided to get a Mk III, and here is what I think of it. All in all, it feels much better than the earlier model with the tangent sight, much snappier to fire and has a much crisper recoil. Much nicer. Most of the stuff that I don’t like about this pistol are the fault of the design that WE copied from Tanaka, as with the earlier model, the absence of adjustable hop is just so beguiling. I know that removing the barrel from the slide is an absolute pain, so the grub screw in the top was never the best hop adjustment to begin with, and unless I hav

Nothing especially noteworthy, just a VFC HK417 with some accessories and a truly horrific paintjob. UKSF fellas seem to like their Kryptek paint schemes, so off I went. I "retired" from machine gunning due to a back injury, but I still had a hankering for some sort of special-purpose weapon. This is my first DMR and it's quite lovely to use.

Bit of an update, I went ahead and did it, hardly had to file anything away to fit the longer barrel through. I'm using 2 10mm o rings to support the front of the barrel within the outer barrel. The 220mm Crazy Jet barrel is a perfect fit, ending just inside the CCW thread. With the space I have I can't comment on any increased range or accuracy, but certainly the accuracy is still as dead on as stock. I have added a Maple Leaf deception 50 bucking with the Maple Leaf nub, when I next go skirmishing I will be able to dial in the hop and see what it can do, as well as chrono.

My new Mp5K PDW. CM.041L UPGRADED VERSION [CYMA]

Oh hey, thanks for sharing it. Totally forgot to post the video here. In the two months since I uploaded that video the guns have still been going strong. There are currently four M249s in my local community, and the two most frequent users have both surpassed the 20K mark with no apparent signs of degradation. I'm quite disappointed that the cassette mags are so half-assed, and the gas box has all the normal problems with using gas guns on full auto, but converting to AEG boxes and HPA is really, really easy and massively elevates the gun. I should also share that since uploadi

Asahi WA2000 DX in mint condition and 3 Mags. Also, a real WA2000-spec accurate Schmidt & Bender 56mm scope. I plan to have a mount replicated like the real one for use of the scope similar to the mount in the picture

Looks to be confirmed, APS re-posted an image of it on their Instagram/Facebook. https://www.facebook.com/AirsoftAPS/posts/847491347385732 https://www.instagram.com/p/Cy5awFJyTUQ/?utm_source=ig_web_button_share_sheet

Hi, Here are my DUAL Full Custom Top-Tier Glocks : - RWA Agency Arms G34 FATAL Edition - RWA Agency Arms G17 Urban Combat 2.0 SEE Full Build "from scratch" available here : - [RWA AGENCY-ARMS] GLOCK 17 Urban Combat 2.0 > Full Custom =>Link - [RWA AGENCY-ARMS] GLOCK 34 FATAL > Full Upgrade =>Link GLOCK 17 Urban Combat 2.0 : Full Gunsmodify - Full Steel Internals, Steel Front base, Steel Hopup unit, Steel Hammer housing/ PDI Inox 6.01 118mm + Ice Pick Gold Poseidon/ Gunsmodify Nozzle V2 CO2, Gunsmodify Stippled frame AA Style, RS Agency-Arms (Magwel

And finally the end of the silenced ones. That's all folks!

My ARES Lee Enfield No4 Mk1* alongside my deactivated 1942 dated Savage No4 Mk1*

VFC M249 GBB

Haven't posted here in a long time, I'll restart with this Scored a steel version Bear Paw SVU GBB a while ago and wanted something special in regards of optics for it. Looked around a bit and finally got my hands on a rare 1P21 scope - very large russian scope that has been used on the SVD. I'm not sure if any of these have ever been used on the real SVU, standard for this was the PSO-1 scope. It's also not possible to mount large scope mounts like the one of the 1P21 on an SVU without disassembling it, as these are pushed onto the side rail from the rear, which can't be

The BL Tech BOSS unit was a very interesting piece of gear that was shown off years ago with a lot of hype but it seemed they turned their back on the airsoft market with hopes of getting government contracts iirc. It seems they're now back with a new name and the implied possibility of sales to your average airsofter.

There's of course nothing for me to add with @CatgutViolin's incredible video, but here are some pictures of mine!

FB is killed forum platform.... FB is fast and covinice for... fast , really hard to find old answer, or when the group die. everything is dissapear with it. I still like use Forum. although here is very few people now, but when you want to search something, answer still at here. It's like a museum with no customer now xD.

Worth a punt on Cyma. They were always very rock solid in my LCTs, so could be in the larger side?

Hey, man. I don't know what kind of laser engraving you are going to get, but most only give you the type you already have with those phony USMC markings, barely taking the paint off and revealing the metal underneath. If you want to get actually metal engraving, as in deep cuts, you can take your receiver to a metal engraver, the ones you hire to engrave sports trophies or hunting knives. The Diemaco logo will be extra though, as they will need to make a custom pattern. However, if you get crisp laser surface engraving, you can then use the 9V etching method to get deep cuts into t

Done the same with my tm/guarder kit. Grips took a bit of work. But looks so much better and also added the early style front and rear sights too. Just need to fix the markings and make them period correct.

Q HONEY BADGER Kit, under build Still ordering RS accessory parts from Q-LLC (HB Stock assembly, 12" barrel, Barrelnut, adjustable gas-block, turnbucle, etc.) Great things to come

South African Railways Police

L9A1 Browning HI power MKII This was the WE version. This was made some years ago long before WE released their MK3 model. for this MK2 build I removed the original gp35 style rear sight. Filled the gap with quiksteel, then smoothed down the upper to match the slimmer (later) profile. I then added a genuine sights, sling loop and real mk2 grips. I then went and had the correct L9 markings added to both upper and lower. Only issue was they were supposed to fully engrave it. But wires got crossed and they only laser engraved it. But will just have

As some of you already surmise, I sold my dignity and purchased something from Cybergun. As the only Tommy GBBR I felt my wallet cornered though to be fair this is not my first CG purchase as I also got the WE/CG Desert Eagle last year so you could say I didn't have any self respect in the first place. So with that, on to the review. The gun is a truly open bolt submachine gun with select fire capability doing about 330fps (30C) at around 850rpm. When out of bbs the bolt locks to the rear until a loaded magazine is inserted and the charging handle pulled back. It is full metal with the ma

Marui - M&P

TM V10 with spare mags ( 3 mags in total ) and holster, gun is well used and I've also carried it in hard holster so have all the associated external wear but shoots as it did new, mags gas tight. The gun and mags will set you back over £200 UK retail or imported , I've also thrown in a holster to sweeten the deal. Looking for £110 including post and paypal. Doesn't comes with the Micro dot bracket, was never tempted to use it on a compact gun like this and don't have it to hand but if found will send it along as it's no use to me. Make: Tokyo Marui Gun/Model: Springfield Armoury V10

Holy *suitcase* I remembered my login info. Wow um ok. So it's been a hot minute. I used to hang out on here with Lupin, 101Matt1, Jagdraben, Magicalninjabuddy, Anteater, and a few others. Good times. Still talk to Lupin, he's a famous internet gun lawyer now with a youtube channel featured on Forgotten Weapons. We're still good friends. Matt became a doctor and lost touch. Never really talked to Jag or the others after I left. I went hardcore into the RS industry and did well for myself. Just retired and moved to Vegas and after a night of Nostalgically watching old airsof

Built by @blobface

CA Mp5A3 made to look like how it is used by our tip of the spear nowadays CA MP5A3 B&T G&P LED handguard Aimpoint M4* Double-mag thingy TAGin 1-point sling