Evolution Airsoft have shared details of their E.T.S. III:
The E.T.S. III™
the most advanced and versatile drop-in programmable electronic trigger
Made in Italy
EVOLUTION SETS THE NEW INDUSTRY’S BENCHMARK
The E.T.S. III ™ takes your gun to the next level. Experience a new level of performance and open your mind to endless programming possibilities.
The E.T.S. III ™ is a concentrate of high technology with a multitude of functions and endless possibilities of combinations. Incredibly easy to install for everybody thanks to its real Drop-in design and easy to program without the need of external programming units or link cables. With the E.T.S. III all you need is your gun.
The E.T.S. III ™ main functions:
– Configurable Fire Selector
– Adjustable Trigger Response
– Burst Mode
– Pre-cocking
– Ramping
– Active Brake
– Full Cycle Control
– PWM ROF Control
– Smart Trigger Auto-Boost
– Auto LiPo, LiFE and Voltage detection
– Low battery warning
– Battery fail safeINSTALLS IN ONE MINUTE OR LESS!!! NO MODIFICATIONS REQUIRED
CONFIGURABLE FIRE SELECTOR
Assign independently to the SEMI and AUTO positions one or more functions for 10 different combinations, each of them programmable with independent values for a virtually infinite possibilities of different configurations:
SAFE – SEMI – AUTO
SAFE – SEMI – SEMI
SAFE – SEMI – BURST
SAFE – SEMI – BURST/AUTO
SAFE – SEMI/AUTO – AUTO
SAFE – BURST/AUTO – AUTO
SAFE – BURST/AUTO – BURST
SAFE – BURST/AUTO – BURST/AUTO
SAFE – BURST – BURST
SAFE – BURST – AUTO
ADJUSTABLE TRIGGER RESPONSE
Feel the trigger like a real one. This function speeds up the trigger response and shortens the time between trigger pull and BB departure. The gun will be more reactive and you will gain a substantial advantage. The 10 levels of pre-cocking adjustments allow to find your preferred setting for a crisp, immediate and more reactive trigger response.
BURST MODE
With this function you can set a pre-determined numbers of BB’s that will be shot for each trigger pull.
You can set your gun to shoot from 1 to 10 BB’s with 1 BB increments. You can choose the number you want, you don’t have to stick to pre-set numbers.
This function can be assigned to the SEMI and the AUTO position independently and a different value can be assigned to each of them, so you may want to shoot a different burst of BB’s in SEMI (e.g. 3 BB’s) and in AUTO (e.g. 10 BB’s), you can also enable this function in SEMI position or AUTO position only.
PRE-COCKING
You can choose 10 levels of spring pre-cocking, after each shot the piston will stop at the desired position pre-cocking the main spring. This produces a much faster reaction when the trigger is pulled.
RAMPING
This function can be enabled in SEMI and AUTO positions while shooting Semiauto or Burst. With the Ramping function active the gun will switch automatically to Full Auto if the trigger is kept pulled after the last shot. If you are shooting Semiauto after the shot the gun will switch to Full Auto, if you are shooting a Burst, after the last shot the gun will switch to Full Auto.
You can set 10 different levels of delay between the last Semiauto or Burst shot and the first Full Auto shot.
ACTIVE BRAKE
This function uses the motor as a powerful electromagnetic brake. The breaking power is adjustable on 5 levels and can be deactivated. This function is very useful with high Voltage batteries to avoid double shots, while shooting Semiauto, and the unwanted departure of one or more shots after realeasing the trigger while shooting in Full Auto or Burst. This is a very common problem with high voltage batteries and can be totally avoided with the Active Brake function.
FULL CYCLE CONTROL
The sensor behind the sector gear counts precisely the number of gear rotations. When this function is active the gears always complete a cycle even if the trigger is released. If you are shooting Semiauto the gun will complete the shooting cycle even if you apply to the trigger a very limited pressure and if you are shooting in Burst Mode the gun will fire the complete burst even if you release the trigger.
PWM ROF CONTROL
When using high voltage batteries the Rate of Fire may be eccessive. That may damage your gun or it may be just unrealistic. With this function you can reduce the Rate of Fire on 4 levels to obtain your desired Rate of Fire. You have freedom to use any tipe of battery.
SMART TRIGGER AUTO-BOOST
This function is automatically enabled when the PWM ROF CONTROL is active. The first shot is at full Voltage and the Rate of Fire reduction is applied only from the second BB. This produces a much faster trigger reaction and the best shooting experience.
AUTO LIPO, LIFE AND VOLTAGE DETECTION
The microprocessor automatically recognize the type o battery used and its voltage. You can freely switch between LiPO and LiFE batteries and different voltage without having to deal with change of settings to re-configurate the unit for a new battery.
LOW BATTERY WARNING
Over discharging a battery can damage the battery and be dangerous. With this function active if the voltage drops behind the safe level the gun will warn you producing a buzz and vibration any time you shoot. You can set Standard and High protection levels or No protection.
BATTERY FAILSAFE
This function is automatically activated when the Low Battery Warning is enabled. To avoid over-discharge that may damage the battery the Battery Failsafe function cuts the power if the battery voltage drops further after a number of unattended low battery warnings. You can set Standard and High protection levels or No protection.
