Bulle Molle Gear is now listed and available at Tactical Kit:
Bulle MOLLE Plate Carrier with Cummerbund: The Bulle US plate carrier with cummerbund is a medium-level armour vest with plenty of MOLLE space for carrying loads on the front, rear and sides. The plate carrier does not have to be used with the cummerbund, and can be put over a soft armour vest as a quick way of adding ceramic plate capability to existing armour when required. The plate carrier adjusts for both height on each shoulder and width on either side, and the velcro-down cummerbund also has plenty of adjustment space to allow for body size.
The plate carrier can be made to transport both 10×12 inch plates and soft armour if required. The rear of the plate carrier is fitted with a large carry handle with velcro for a name tape, and the handle is re-inforced all the way down the vest for strength. The front of the plate carrier is also provided with velcro on the upper chest, allowing name tapes, nationality and blood patches to be displayed. The cummerbund may be taken off and worn separately, and has internal velcro pockets for the insertion of smaller ceramic plates to protect the side of the body, if required. It is also provided with MOLLE for carrying loads on the side of the body. The plate carrier is made of 100D Cordura nylon, with Duraflex brand buckles and plastic furniture. All MOLLE and seams are double or triple stitched for strength, and double bar tacks secure the shoulder straps to the front of the vest. The plate carrier adds versatility to your armour or MOLLE package and is the top choice for a compromise between a skeletal load carrying system and armour carrying capability in high-speed situations requiring a lower, or variable, profile.
Bulle Black Urban Assault Vest: Bulle Urban Assault vest in black, made in one of the most popular and functional modern styles available. Vest is adjustable at the sides and shoulders. Vest is designed to take six magazines, one in each of the six pockets in the front, including M4, M16 and AK sizes. Elasticated bands around the mid-section of each pocket helps to ensure that magazines which are properly secured do not move about or fall out. Magazine pockets are each secured by an individual velcro flap. Each magazine pocket has a rivetted eyelet drainage hole. Vest has two chest pockets and one large FFD pocket on the upper left shoulder. The left chest pocket also has a velcro-mounted a shotgun shell holder with capacity for five shells. The right pocket is designed for general articles, and the FFD pouch is large enough to hold a small PMR radio or a medium to large size field dressing. Upper left and right shoulders have D-rings for attachment of carabiners or feeding through of various types of thin tubes. Adjustment over the shoulders is provided via two velcro flaps. Torso adjustment is provided by two lace-up sections left and right which are each retained by a UTX-Flex branded toggle. A carry handle is also provided in rear. The rear nylon mesh is double ply so that a hydration bladder or similar long, thin utility may be carried on the vest. Mounted on the outer layer of mesh on the back are three nylon webbing straps which can take pouches and hydration carriers with a little modification. Vest has two zip-up internal map or document pockets left and right. Vest opens in the front via a chunky YKK single zipper and the internal map or document pockets are also closed with YKK zips. The duty belt is secured to vest via belt loops on the vest, and is fastened with a 50mm UTX-Flex Stealth branded quick release buckle designed for military and law enforcement use and tested for durability, flame and heat resistance. The vest is nylon mesh based for ventilation and comfort and is designed to present a low profile whilst boasting one of best ammunition carrying capacities in an all-purpose urban vest. Vest is made of 1000D texturised Cordura. Any accessories shown are for illustration purposes and are not included with the vest.
Bulle MOLLE Rapid Dump Pouch: The Bulle MOLLE Rapid Dump Pouch is the answer to empty magazines which need to be stowed on the move or in high intensity situations. With the always open top, there is no need to pull a drawstring to get magazines or other items into the pouch. This pouch is 29cm x 25cm x 10cm which makes it perfect when you have to secure numerous magazines. The Bulle rapid dump pouch is also ideal for practical shooting. At the top of the pouch there is a liner that has elastic shock cord sewn into it that makes a hole for the opening of the pouch. The elastic shock cord can be drawn tighter or loosened and is held its desired location with a Duraflex toggle. The hole it creates is big enough to fit mags and other items inside, but is also small enough to keep all spent items inside from falling out of the pouch. The rapid dump pouch also has a velcro flap that can seal off the top if deployed. This velcro flap also holds the pouch in the rolled away position when the pouch is not needed. The rapid dump pouch can be located or mounted onto MOLLE PALS webbing, and can also be mounted onto a duty or riggers belt with 2 integrated 25mm x 50mm webbing loops fitted with velcro and snap buttons. Pouch is made of 1000D Cordura and all plastic furniture is made by Duraflex for military applications. Price is for one pouch only. Belt shown in pictures is for illustration purposes and is not included with the pouch.
Plus most of the Bulle range of Tactical Molle Kit.
Kind regards, Ian, (Tactical Kit)
