RA-Tech have sent over details of their Marui HK45 slide set:
In-Depth Review of RA MARUI HK45 Slide Set -1
滑套左側雕刻著綠扁帽〝De Oppresso Liber〞徽章。(拉丁文意喻:解放被壓迫者)
Left side of slide is marked with the badge on Green Beret "De Oppresso Liber". (Latino: To Liberate the Oppressed)
In-Depth Review of RA MARUI HK45 Slide Set -2
HK45滑套最顯眼處即為槍口兩側的斜面特徵,由相鄰數個複雜斷面是否精準接壤,可判斷採吋正確性。
The big characteristic of HK45 slide is the sloped area on both sides of the barrel end. From the sloped area to the slide end, each part is closely corresponding to its real firearms.
In-Depth Review of RA MARUI HK45 Slide Set -3
拋殼口與外管膛室銜接觸完美接合,斷面中包含複雜的圓角與斜面,RA研發人員都經過無數次的修正,確認與HK45真槍外觀100%一致。
The ejection port and the barrel chamber perfectly meet each other. The appearance shows several complex round angles and slope. This is the result of countless revisions and finally make it a 100% HK45 firearms specification.
In-Depth Review of RA MARUI HK45 Slide Set -4
滑套最尾端獨特的〝迴旋標〞形狀的斜面構型，甚至連Marui原廠塑膠滑套都與真槍有些微誤差，RA旋即將之修正。
The boomerang shape at the end of the slide is of rs size.
In-Depth Review of RA MARUI HK45 Slide Set -5
不同於Marui原廠塑膠滑套，將插銷結構做在同一個模具中，RA鋼滑套後段頂端採取更為仿真的〝裝飾插銷〞。
Unlike Marui stock plastic slide, the fake pin on top of the RA steel slide is more simulating.
In-Depth Review of RA MARUI HK45 Slide Set -6
不同於Marui原廠將塑膠滑套與抓殼鉤做成一體,RA-Tech完全復刻真槍外型的「鋼製HK45型抓殼鉤」,並將之獨立出來。事實上抓殼鉤因玩具槍內部結構牽制,本體極為細薄。即使如此,經過專利的設計結構並不需上膠即可穩穩固定於滑套之上。
While Marui original plastic slide and extractor are in one piece, RA steel slide and steel extractor are detachable. The extractor is light and independent. It is of rs size and can be fixed on the slide without glue.
In-Depth Review of RA MARUI HK45 Slide Set -7
鋼製外管上完美復刻真槍HK45〝美國版刻字〞，採取多階段雕刻製程，本體為QPQ表面處理，呈現不同於滑套的亮黑色澤，與真槍特徵一致。
The marking on the steel outer barrel was engraved and processed by multiple steps, and QPQ treated on the surface. The barrel and slide are two-tone black which matches the rs color.
In-Depth Review of RA MARUI HK45 Slide Set -8
準星座與滑套頂端之間實際存在著〝間隙特徵〞不仔細看會錯認為是公差造成，實際與真槍特徵無異。另外值得一提的是，容納準星座的橫向缺口平視呈現獨特的〝外八〞設計，RA也忠實呈現。
There’s an interval between the front side base and the top of the slide. It may seem like a difference but actually a real steel feature. Moreover, the unique breach containing the front side base is also presented accurately.
In-Depth Review of RA MARUI HK45 Slide Set -9
除了斜線止滑紋設計外,之中最為特殊的「銳劍型」斷面設計,橫跨全槍幾近2/3。不論是劍寬、劍長以至於劍中心的線特徵等,一般公認此處常無法完美復刻,但RA-Tech做到了!
In addition to slash serration, the sword-shape section across the slide is exceptional. The dimension of the section and line in the center are perfectly replica.
In-Depth Review of RA MARUI HK45 Slide Set -10
HK45滑套外型不同於MK23、USP等較平直線條,取而代之的是更為前衛的斜線止滑紋設計。RA製作市面上唯一仿真設計，斜線上下端切口皆為正確削切的深度，使兩端斜面向外延伸，為向真品致敬的代表作。The serration of the HK 45 slide are not straight as those of MK23 and USP, but more stylish slash. RA-TECH presents the only real steel appearance design in the market. The correct depth of the cutting makes the lines extend outward. It’s a masterpiece in honor of the real HK 45.
In-Depth Review of RA MARUI HK45 Slide Set -11
滑套上端平面與兩側斜斷面銜接處,100%復刻真槍平順特徵,並略帶仿真鍛造細微毛孔,沒有多餘的铣刀痕
The edges on top of the slide is smooth as those of the rs without extra knife marks.Link to the product
Photo Album(RA-Tech)
