Latest videos from our YouTube subscriptions: June 24, 2012

Mark and I take a look at the very disapointing ASG UTS Urban Tactical Sniper from www.mainirishairsoft.com

The Urban Sniper is a powerful solution if you would like to get into sniping. It comes with all the accessories you will need including a 4×32 StrikeSystems ProOptics scope, adjustable bipod and 2 magazines. Tools for changing to left handed use are also included in the package. For better performance the hop-up is adjustable and the stock has 6 retractable positions
Length:1080/985 mmBarrel length:374 mmMag. Capacity:25 roundsStandard Mag.:17035 Hop Up Type:AdjustableVelocity:135(443)Weight:1950 grams

Check them out at

http://www.actionsportgames.com/

Main Irish Airsoft Home

you can also check them out on FaceBook

https://www.facebook.com/profile.php?id=100000030024151

Lol this thing does have steel but not 100%. the buffer lock on mine isn’t and that’s a crucial area.

Last round we heard that lol "WE has no steel lower internals everybody knows that it won’t magnetize it’s zinc alloy!" NOT another Airsoft myth blown to hell

Just a fast outtake from today’s skirmish. The video really serves no conventinal purpose, other than that I thought this was funny. Thank you for watching and please subscribe!

Here we look inside WE’s Version of the popular M4 Rifle. This one at this point in my opinion is by far the best in terms of it’s performance. WE’s Mags still need work but are quite reliable if maintained properly. This weapon is in my opinion the hardest shooting fastest shooting of the three new ones I’ve tested. And it’s evident when you look at the bolt carrier design. The severe rounding of the rear of the carrier aids it in making it the most smooth action I’ve seen. Smoother yet than G&P as well. Granted the additional roller bearing at the top of the BCG is not realistic but who’s ever going to see that in combat right? They sacrificed some gas efficiency by going open bolt in my opinion but players wouldn’t hush till the cylinder was gone. They cost me dearly I loved that cylinder and what it accomplished. But… WE struck Back with the extra roller so Bravo James OL’ Boy way to sneak that one in. As long as I’ve known James Chan I’ve found him to be a downright joy to speak to and be around. He gets so overjoyed when he knows real shooters use Their weapons and get enjoyment from it. He constantly watches YouTube and gas gun forums and it shows in the latest lines of guns WE has turned out. He is by far the players advocate. And one hell of a fine human being. Thank you my friend. Now BRING BACK the kit to change back to the AWSS System! We can’t find it anywhere! Lol.

Here we look at the internals of yet another top tier M4 GBBR. There are absolutely zero CNC parts period. They are die cast (pot metal steel) parts just like WE NO DIFFERENT.

Here we look into the lower receiver of the King Arms M4 GBBR. We see what is steel and not what is die cast and what is not. And hopefully you guys will finally see what is real and what is plain ol’ marketing. There are ways to fake CNC machining in these parts and King Arms is far from innocent in this.

Trying out the Thumper in Tribes Ascend! Interested in Tribes? It’s FREE!
https://account.hirezstudios.com/tribesascend/?referral=462339

SideStrafe on facebook and twitter – http://www.facebook.com/sidestrafe
http://www.twitter.com/sidestrafe

Community Announcement: http://tinyurl.com/7x6wrac The Indian Corn Crown Sinnet is one step beyond the foundation technique shown in my Knobby Triangular Crown Sinnet video. Generating a speckled, yet systematic pattern, that slowly reveals itself as you keep tying forward (trust me), the piece is truly unique in its appearance. This said, play with it (i.e. try out different numbers of starting cords and/or spiral patterning). Like the Endless Falls genre of ties, the Knobby Sinnets include a vast number of possible iterations. Video Production by J.D. Lenzen of "Tying It All Together".

Quiet, accurate, and deadly… at least on rats and other vermin. The Savage Mark II FV-SR is the perfect "Rat Jihad" rifle. It’s short, light, cycles quickly for a bolt gun, has an awesome trigger, and comes with a threaded muzzle for suppressor. One example shown here is camouflaged in condensed Varicam (Multicam-like) pattern, making it even more stealthy in many environments. Contact www.missionspeccamo.com for that service, use code nutnfancy. As a pest control rifle, the Savage Mark II is an excellent choice. Tested for months in TNP were two FV-SRd and a Mark II G model. Some reliability problems surfaced early with a magazine whose sides separated. But mostly they ran very reliably and shot with excellent accuracy, especially the Aguila Super Extra Subsonic load (shown). Shot from 20 to 100 yards, the Savage Mark II accuracy seemed to keep pace with all other .22 rifles tested so far. Many targets are shown with many loads to include Remington Subsonic, Eley Prime Match, Federal Bulk, Aguila, and CCI Min-Mags. Bolt manipulation is smooth, the adjustable 3 lb AccuTrigger is excellent (watch it for side disengagement though, discussed), the safety perfectly situated, the LOP well sized, and the molded in checkering on the synthetic stock works. The magazine and its retention system works but I prefer that found on the Marlin XT rifles for reason discussed. This are mid-priced .22 bolt action rifles made in Canada and for the most part the quality is excellent: hard wood stock well finished, quality rifled barrels, and most models have attractive bluing jobs (however bluing on the FV-SR is rough, perhaps intended to reduce glare). Value is good but there are some misses here: few versions of the Savage Mark II comes with sights AND scope bases. The receivers are not grooved for scope mounting either. This means you will have track down and buy bases for your gun. Te G Model is even lacking screws for the scope base mounting holes. Its main competition the Marlin 925 or XT-22 includes iron sights and a grooved receiver. The good news is even with the iron sights, the Mark II G shot with outstanding accuracy so you may choose never to mount a scope. All versions offer extreme recreational possibilities and the .22 bolt gun is one of my favorite fun choices. But for its compactness, threaded muzzle, and accuracy, I recommend the FV-SR version for most POUs. The larger and tacti-cool Mark II TRR-SR is a good range choice perhaps but I would never carry it afield. All excellent versions are shown and discussed. Overall then the Mark II .22 is another American Classic .22 bolt gun that runs fast and accurately and keeps your checking account in the green. And the rats and starlings in the red.

CZ75 steel outter barrel
http://www.airsofttaiwan.com/goods.php?id=638

M93R steel outter barrel
http://www.airsofttaiwan.com/goods.php?id=635

Tominator and this video are sponsored by Elite Force Airsoft BBs: https://www.pyramydair.com/m/Elite-Force-Airsoft-BBs/208/390
http://airsoft-guns-blog.pyramydair.com
http://www.facebook.com/PyramydAirsoft
Tweets by PyramydAir
SC Viper Airsoft Action – Tominator, MilSim Junkie, Spartan117GW, KWA Mike, the CQBJ, and Asian Colin Farrell rolled out to SC Viper in Corona, California on Father’s Day 2012 to throw some plastic down range. The day was ultimately a success for everyone involved except for the Tominator, who sustained a gnarly little dislocated shoulder at the end of the day. Probably Karma for that epic friendly frag he got on his own teammate, KWA Mike. For those that are curious, Tominator was running a G&P WOC Gas Blowback Rifle featuring the new Elite Force Flip-Up Sights mounted on a Madbull Daniel Defense Mk18 RISII in FDE and a replica Elcan Optical Sight.

———
SC Viper Airsoft Action, Tominator, Dislocated Shoulder, MilSim Junkie, Spartan117GW, KWA Mike, Asian Colin Farrell, Elite Force Flip-Up Sights, Elite Force Magpul Sights, Elite Force MBUS, Madbull Daniel Defense Mk18 RISII, Mk18, G&P WOC GBBR, KWA LM4, Pyramyd Air, Pyramyd Airsoft Blog, airsoft-guns-blog.pyramydair.com, airsoftblog.com, Tom Harris,

Ajax of TAS and BOE gives you the skinny on the new KWA KM4 CQR and M4 Polymer Mid Cap Mags and Team Black Ops Elite’s new Facebook groups.

BOE’s Facebook: http://www.facebook.com/groups/313054225455190
TAS CRQ: http://www.tacticalairsoftsupply.com/shop/kwa-cqr-mod2.html
TAS KWA Mags: http://www.tacticalairsoftsupply.com/shop/kwa-m4-m16-polymer-mid-cap-magazine-set.html

Allie and I take a time out during a hike to announce the results of VICTORINOX RESCUE TOOL Giveaway (10 of them). Thank you to Becky at Swiss Army and congrats to the winners and there’s more to come. Winners are solid TNPrs who have supported the work load here with great comments, views, and their own Channel pages. And now Notjustknives.com has donated 10 BLUE TENACIOUS Sprint Run knives, each one signed and numbered by me.

http://www.airsoftgi.com/product_info.php?products_id=10773

The Classic Army Full Metal Krebs KC-89 Enhanced Speed Load Tactical Airsoft Gun is arguably one of the most realistic tactical AK’s on the airsoft market today, and is a great replica of its real steel counterpart.