Distributor News

Jia Dyi have been taking a closer look at some newly released upgrade parts:

Honorable clients, Introducing the new released upgrade parts from recently:

The new Acetech Blaster is suitable for standard airsoft and gel BBs. It has three modes available: Tracer with flame, Flame only, Tracer only. The main feature of Blaster is the flame simulation function, simulates muzzle flash, the effect of flame depends on volume of gas or water fog around the muzzle, with more volume, effect will be better. There is intelligent power control, Blaster power on by shaking, enter sleep mode while idle for over 5 minutes.

The tracer function:
Supports green tracer BBs and water BBs, but don’t support red tracer BBs.
The flame function:
Supports all kinds of BBs, different color of BBs will have subtly different flame color.

※ Burst Speed: Up to 35RPS
※ Battery: Li-Ion, charging time 2.5 hours
※ LED power and battery indicator.
※ Certificates: FCC CE ROHS
※ Dimension: Diameter 32mm, length 76mm.
※ Weight: 70g

Armin Lab is a design team from Taiwan, with many years of experience in hardware research and development, and a passion for airsoft. Currently there are tracer unit, chronograph and other products, and will be released one by one very soon. The first launched product is the Flash Nano Tracer Unit.

Rotary switch, the player can turn on/off by directly selecting the switch, instead of the button type. Introduction wake-up function, the product will enter the power-saving model (sleep mode) after standing for 5 minutes; If it senses shaking or raises the gun, it will resume operation node

Features:

1. Support Green Tracer BBs
2. Built-in lithium battery, rechargeable, charging time 1hr
3. Support up to 35 RPS, 30,000 shots with full battery
4. User friendly power switch design
5. Intelligent power saving and turning on
6. Dimension: length 51mm, diameter 27mm
7. Accessories: Micro USB charging cable, M14ccw to M11cw thread, Hex Wrench

The M.A.V. 44 system can directly install all the original VSR components-handle, tail’s cover, etc.

Only needs very simple installation steps to turn your VSR into the Max Air Volume bolt-action sniper rifle.

TNT redesigned the length of the groove, the position of piston head O-ring make full use of all the effective air volume in the cylinder, without changing the total length of the cylinder, the effective air volume is increased to the maximum.

The upper receiver, TNT has corrected the common problem of all VSR series all the time: the tolerance problem of the locking groove of the handle.

All screw holes on the upper receiver are made according to MARUI specifications. TNT also added screw holes on both sides to fix the outer barrel to avoid shaking, to ensure that each loading BB can be in the best position, which improves stability…

※ Aluminum enlarged upper receiver x1
※ Stainless steel cylinder body (44.3cc), steel cylinder tail section, steel cylinder head
※ Aluminum enlarged piston body
※ Steel piston tail section, available in 45° and 90°
※ Aluminum piston head (10g), or a steel weighted piston head (30g) can be purchased separately
※ Steel 9mm spring guide (SRS spring or electric gun spring can be used)
※ The trigger assembly fixing screw washer x4 is included to prevent the bolt from being too long and jamming the camera

The T-N.T 2021 new year’s masterpiece, SRS special anti-rotation handle push nozzle assembly. It is a phosphate treated finished product with all medium carbon steel. The push nozzle can be changed to different lengths to achieve different effects. Standard configuration: 16mm / Heavy salty configuration: 15.8~15.6mm

You can adjust the length by yourself. The handle is slightly longer and can exert more force.

If you are interested in the above products, please contact local legit dealers first or keep Jia Dyi informed at sales@jiadyi.com, if there’s any more curious, or want to share any of your ideas with us, welcome to contact us as well, we can also provide you suggestion & information that you need.

Jia Dyi

Jia Dyi have shared details of the Ascend Kimber 1911 Black Ice Pistol:

Jia Dyi： ASCEND KIMBER 1911 BLACK ICE PISTOL
-Flush fit extended magwell
-High-contrast ledged fiber optic sights
-Hight undercut trigger guard
-New design slide and front (Slide lightening cuts)
-Stiplex front strap texture for positive grip
-Stylish design on the backstrap panels

MAY the new style become your best choice!!

Specifications:
*Material: Aluminum Alloy / Plastic
*System: Gas Blowback~
*Gas: Top Gas / Green Gas
*Hop-Up: Adjustable
*Firing Mode: Safe / Semi-Auto
*Magazine Capacity: 15+1 Rounds (6mm)
*Compatible with WE magazine and parts

Check out https://www.facebook.com/ASCENDAIRSOFT.TW for further product information.
Or contact your local dealer for more information.

Jia Dyi

Jia Dyi have been taking a closer look at 4.5mm airsoft pistols:

Jia Dyi： 4.5mm CO2 Airgun

Honorable clients,
6mm and 4.5mm are the main calibers in the airsoft market. Although 6mm guns account for the majority, 4.5mm also has its own market, and is particularly popular in some areas. So today we will talk about two Taiwanese brands KLI and KWC that make 4.5mm pistols.

The first coming up is the Baba Yaga Hi-Capa 4.5mm Blowback pistol from Krown Land International (KLI), fans of the John Wick films will instantly recognize this outstanding pistol!

Krown Land International (KLI) is an airsoft manufacturer based out of Taiwan, dedicated to the research of GBB and CO2 system and also carrying out various innovative development. In 2020, KLI has launched a 4.5mm Airgun pistol, which is perfect new choice for users with higher kinetic energy requirements.

Based on an STI 2011, the Baba Yaga is expertly crafted with slide lightening cuts to increases the cycle rate and reduce perceived recoil. The stippled texture will give you a perfect grip without wearing gloves. The extended magazine release helps with dropping the magazine without breaking your grip, and the large flared magwell assists with magazine insertion, helping to guide the magazine into the firearm and faster reloading. The tuned trigger has an incredibly light pull and crisp break.

This CO2 model has reinforced internals to handle higher pressure. This will also increase the velocity to roughly between 330-350fps. The match grade coated barrel offers unmatched accuracy, consistency and reliability. And there are other features include a full length, stainless steel guide rod and fiber optic front sight with adjustable target rear sight.

• Highly detailed CNC machined aluminum slide
• CNC machined aluminum frame w/ molded reinforced polymer grips
• Molded Stippling provide a comfortable, slip-resistant grip
• CNC precision barrel w/ rose gold (imitation Bronze BLC) coating
• Professional slide lightening cuts help the slide cycle faster with less felt muzzle flip
• Flared mag well aids in quick reloads
• Target style sights w/ fiber optic front
• Extended magazine release
• Reinforced nozzle, suitable for Gas, CO2 and HPA

KLI M92
There’s also M92 4.5mm series from KLI in five styles and colors, welcome to check on their website http://www.krownland.com.tw or contact us for more info.

Length : 228mm  Weight : 905g
Magazine Capacity : 20+1 Rounds
Caliber : 4.5mm (0.177”)
Semi-auto
[ Max Velocity ]
Stander Barrel : 320fps
Extended Barrel (with suppressor) : 440fps

KWC has produced plenty kinds of 4.5mm models, the classic one M1911, M92 to some special model such as M712, MAKAROV or K75. And the next we want to show you are the UZI submachine gun and PYTHON revolver series by KWC.

KWC UZI
The Uzi is a family of Israeli open-bolt, blowback-operated submachine gun. The Uzi was one of the first weapons to use a telescoping bolt design which allows the magazine to be housed in the pistol grip for a shorter weapon. Compared with the earlier submachine guns, Uzi has the advantages of being shorter and lighter, easier to operate and low cast. It has become a very effective melee weapon, especially for clearing the enemy in the room, bunkers and trenches.

The KWC UZI submachine gun is powered by CO2 and has an authentic look, feel, recoil, and sound. The design of the weapon retains the detail and authenticity of the original. The heavyweight metal and polymer construction includes durable metal components and blowback action making it even more life-like.

KWC UZI is ready to go in semi auto mode, it can however be easily mod to shoot in full auto. Similar to the original, it has an adjustable diopter rear sight. The model sports a folding stock that helps the balance and stability of the platform, and is adapts to different users and combat situations, quick and practical adjustment. The handle is ergonomic, easily adapts to the shape of the hand, providing a firm “grip” without looseness.

The KWC UZI shoots 4.5mm steel BBs with around 350fps.It’s considered a high-end CO2 BB gun; the model comes with a 25-round single-track magazine that does not have a follower to stop the bolt from continuing to operate even after the magazine is empty. And the CO2 cartridge is located in the magazine itself.

• Mini Protector submachine gun
• Uses 12-gram CO2 cartridges
• Semi-auto
• Blowback system
• 25rd full metal BB magazine (4.5MM)
• Realistic recoil
• 71-yd range
• Folding metal shoulder stock
• Open sights

KWC Revolver Series
The Python 357 CO2 BB Revolver from KWC is a high quality, full metal CO2 pistol that looks absolutely fantastic, and shoots just as great. There are two colors black and silver in 2.5 inches, 4 inches and 6 inches. With a 6 shot rotating cylinder, which houses 6 shells, this pistol is easy to load making sure your shooting experience is quick and enjoyable. It is powered by 12g CO2 capsule which is housed within the grip, which gives around 50 shots from 1 capsule.

The pistol is very close to the original 357 styled revolver it is based on. Being all metal gives this CO2 BB revolver very realistic weight and feel, and the loadable brass shells make using this gun almost exactly like using a real shell loading revolver but for much less cost per shot and less recoil on the hands. The trigger pulls on the KWC Python Revolver is good in both single and double action, the spring tension that pushes the inner barrel to make contact with the cylinder is noticeably lighter on the KWC 357. The hammer is smoother and has less wiggle.

If you are interested in the above products, please contact local legit dealers first or keep Jia Dyi informed at sales@jiadyi.com, if there’s any more curious, or want to share any of your ideas with us, welcome to contact us as well, we can also provide you suggestion & information that you need.

Jia Dyi

Jia Dyi have been taking a closer look at Airsoft consumables:

Jia Dyi： Indispensable Consumables
Honorable clients, Introduces the popular categories of Aim Top, indispensable consumables for everyone: BBs & Gas. However, even if it is only consumables, quality is also very important, Aim Top attaches great importance to this and has developed a product that meets everyone’s expectations.

The Extreme Precision BBs is made of high-quality materials, carefully polished and multi-stage control ensures a high-quality product.

It has a multi-polished surface and a diameter of 5.95mm (+/- 0.1mm).

Provides minimum deviation diameter as close to your inner barrel as possible with the lowest deviations to ensure maximum accuracy, range, and power without jamming.

The smooth surface ensures particularly good feeding properties, which means that the balls can be used in all magazines without any problems.

Bio-degradable becomes popular and required day by day, the new Bio Tracer 6mm BBs from Aim Top are made of a special and environmentally friendly material. Due to the organic composition, the spheres are completely degraded over time by environmental influences such as rain, solar radiation, heat, etc. Thanks to this property, the environment is protected and the BBs no longer have to pick up. The interesting about these Bio BBs is the tracer property. The Aim Top Tracer BBs are charged with bright and continue to glow for a long time when it exits.

Gas: The consistent pressure airsoft green gas by Aim Top is suitable for all gas airsoft guns with the Blowback system. It is a very high-quality gas mixture, a special blend of C3H8 and silicon oil, for improved consistency and to help preserve your air seals. The balanced amount of silicone oil helps reduce friction, wear and protects the rubber parts of the weapon. This green gas has gone through 3X the odor removal process to remove the smell commonly found with other Airsoft green gas.

CO2: Aim Top CO2 is Premium precision grade made in Taiwan with world-leading equipment directly of 12g Co2, maximum diameter 18.9mm. Pack with cartridges, and 50 can per inner box.

In addition to BBs and Gas, Aim Top also continues to develop other upgrade parts or accessories such as hop up rubber, motor, reinforced piston, gear set etc. And it also happens that Aim Top has just launched a new Hop up Rubber series last month, so we will introduce it now as well.

The larger the contact area between the pressure point and BB, the more stable the flight trajectory. Therefore, Aim Top pressure point with a horizontal block design, improves the surface area which contacts with the BB, it provides more stability with the trajectory. BB shoots perfectly without tilt and will not decrease the speed.

Features:
*Lightly narrow entrance for better sealing to achieve more consistent power output
*Increased the maximum velocity and accuracy
*Helps to improve the air tightness as well as consistency from shot to shot
*Easy to adjust the hop range
*The effect is more significant with 0.30b+BBs
*Suitable for WE/Marui/KJ GBB Pistols and VSR-10 compatible air cocking rifles
*Material: High Curability Rubber

If you are interested in the above products, please contact local legit dealers first or keep Jia Dyi informed at sales@jiadyi.com, if there’s any more curious, or want to share any of your ideas with us, welcome to contact us as well, we can also provide you suggestion & information that you need.

Jia Dyi

Jia Dyi have been taking a closer look at a selection of World War II weapons:

Honorable clients, Each collector or player have their own preferred style or model. And if you are a collector of old guns, then you must not miss the few guns that will be introduced today, they all played an important role in World War II!

King Arms – M1 Carbine

The M1 Carbine is a light weight, easy to use, .30 caliber (7.6mm) semi-auto carbine that was a firearm for the U.S. military during World War II. Developed out of a need to arm specialized infantry, its design was to solve an issue where a standard full-size rifle proved to be too heavy and unwieldy for specialized infantry to adequately perform their assigned duty while still lugging around a heavy backup weapon. The M1 Carbine with is .30 cartridge helps to bridge the gap between a full-size rifle round and pistol round. It came into service around mid-1942, and was produced in several variants and widely used by military, paramilitary and police forces around the world. It has also been a popular civilian firearm.

The King Arms M1 replica is a beautiful reproduction of this classic firearm, use quality fabric and perfect 1:1 scale to meet the collectors and reenactor exigence. The rifle has a very realistic processing of wooden stock, metal parts and cocking mechanism which helps achieve a more realistic weight, with a Co2 powered gas recoil system helps to imitate the bolt cycling action.

Thanks to the implementation of GBB airsoft replica credibly mimic the function of charging after every shot, as is the case with the firearm. It is this well with a nice kickback gives owners great feeling of shooting, and is equipped with latest pre-shot action for better accuracy.

SRC – SR40

The MP40 submachine gun is designed in 1938, designed by Heinrich Voller with inspiration from its predecessor the MP38 and was used extensively by the Axis powers during World War II. The MP40 is made from stamped steel and designed to fire from an open bolt, it was compact lightweight, easy to use and could spit 9x19mm rounds down range at a blistering 550 rounds per minute. With over 1.1 million produced between 1940 and 1945, the MP40 became easily associated with the field grey clad Wehrmacht.

The SRC SR40 is one of the most realistic MP40 replicas on the market today. Bult from durable and authentic stamped steel, features electric blowback, imitation Bakelite furniture, an under folding stock and a drop free 60 rounds magazine.

SRC SR40 AEG has been around now for a few years but it has been improved from its original concept with fitted MOSFET giving better trigger contact wear and more stable voltage protection for the full auto only function.

ICS – M3 Greaser

The M3 is a .45 caliber submachine gun mass-produced during World War II, it was chambered for the same ACP round fired by the Thompson submachine gun, it was less accurate but lighter and cheaper to produce. The M3 was commonly referred to as the “Grease Gun” or simply “the Greaser”, owing to its visual similarity to the mechanic’s tool.

The ICS M3 replica only shoots full-auto and is built entirely of stamped and riveted metal just like the real gun. It is lightweight, easily maneuverable, and very reliable. Measuring only about 29 inches fully extend, designed for both indoor and outdoor battles thanks to its fully adjustable hop-up unit and 2 position retractable steel stock.

Internally, this grease gun AEG features a proprietary metal gearbox equipped with a steel gear set and 8mm steel bushings designed to hold up against stress from high torque motor. That gives you a high-performance AEG on the field with respectable rate of fire behind ever shot. Additionally, it comes with a high-capacity magazine that can hold up to 430 rounds and a battery storage compartment inside the body (not the magazine). All matched up perfectly to give this WWII-style airsoft gun a great competitive edge.

WE – 1911

The classic M1911, also known as the Colt 1911, is the best-known of John Browning’s design to use the short recoil principle in its basic design. It served as the standard-issue sidearm for the United States Armed Forces from 1911 to 1985 and was widely used in WWI, WWII and few others. Besides being widely copied itself, this operating system rose to become the pre-eminent type of the 20^th century and of nearly all modern centerfire pistols.

WE’s expansive line of gas blowback pistols are always a popular choice for airsoft players for their price, features and reliable. WE’s version of the classic M1911 design expands and improves on the original idea by offering more bang for the buck.

The M1911 replica from WE is full metal body, semi-auto and with hard kick blowback. The metal parts of the gun include the outer barrel, chamber, recoil spring rod, slide stop, slide safety, hammer, trigger and also its vintage sleek matte chrome finish with its classic brown checkered grips. Equipped with a functional grip safety and slide safety to make its operation safe for all shooters. Moving slide and strong gas blowback system gives the user a very realistic experience. On the other side, WE provided quality parts that ensure long time usage and precision of each shot.

If you are interested in the above products, please contact local legit dealers first or keep Jia Dyi informed at sales@jiadyi.com, if there’s any more curious, or want to share any of your ideas with us, welcome to contact us as well, we can also provide you suggestion & information that you need.

Jia Dyi

Jia Dyi have taken a look at Carbine Conversion Kits:

Honorable clients,
For an airsoft player, it is common to have more than one gun including different type, especially when you are playing in the field. And when you are getting a submachine gun, in addition to buy a whole new submachine gun, another way is to buy a Carbine Conversion Kit to upgrade your pistols into a SMG with an easy way. So here we present few options from different brands.

The CAA Airsoft RONI Pistol Carbine Conversion from King Arms, which there are three version: For Glock series, M92 series and P226. They are ergonomic designed and equipped with ambidextrous front and rear sling mounts, and large charging handle. Charging the weapon is easy and it is user friendly to both left and right-handed operators. It is integrated with a CNC machined Aluminum top and 2 slide rails for mounting accessories, and a Nylon Fiber lower rail to mount any forearm grip. The RONI is equipped with and adjustable 5 position buttstock, and features a spare magazine holder for faster reloading. The adjustable cheek rest on the buttstock is removable. The RONI Pistol Carbine Conversion includes a pair of flip-up sights, a detachable folding forearm grip and a charging handle.

RONI G1/G5 Glock Version, Compatible with:
WE GBB G17 / G18C / G19
Tokyo Marui GBB G17 / G18C

RONI-B M9 Version, Compatible with:
WE M9 / M9A1 GBB Series,
KJ Works M9 / M9A1 GBB Series,
KSC / KWA US M9 / M9A1 GBB,
Tokyo Marui M9 / M9A1 / Samurai Edge GBB Series

RONI SI1 P226 Version, Compatible with:
WE/KJ Works/Tokyo Marui P226 GBB series

SLONG Airsoft is a Taiwanese brand that manufacture quality products machined from CNC machine. They offer range of accessories of all kinds; solid and efficient internal parts make them recognized manufacturer in the world of airsoft.

The G-KRISS kit is with a light weight design, made of nylon fiber impact resistant plastic. The kit allows you to transform your GLOCK handgun replica into a long replica. Entirely in nylon fiber, and is equipped with an upper 22 mm picatinny rail which is intended to receive a sighting optic. In addition, both sides are designed with tactical guide rails for the installation of tactical supplies such as a laser, lamp or a handle. Also, there’s a stock tube compatible with most M4, AR15 and other stocks.

-Come with original SLONG “Ngel of Death” Stock
-Adjustable magazine tightness
-The front groove can equip with a spare magazine
-For WE, KJ, Tokyo Marui, VFC, GLOCK series
-Can be used with SLONG G-KRISS XI
-G-KRISS XI is also compatible with Hi-Capa series

And then let’s look at the SMG Conversion Kit from SRC that launched in early 2020. This kit is made of polymer and is designed for use with the SRC SR92 GBB Pistol and most other M92 GBB pistols, but does not feature a full-auto function.

The set includes all the necessary mounting and setting screws for aligning the replica pistol. The housing has a long Picatinny rail running almost the entire top part of the conversion until the ends of the kit, which there’s an adjustable stock with 3 settings. The unit has QD sockets located on both sides, below the stock adjusted button. And there are further tactical rails at the front for your other tactical supplies, one on each side and one at the bottom.

The whole set works properly, without jams and blocking the slide. The level left side is used for pulling the slide back. The outlet opening is considerably enlarged for the purpose of using a silencer on the gun, a significant part of which will remain inside the housing. The quality of workmanship does not raise any abjections and there are no visible molding marks.

If you are interested in the above products, please contact local legit dealers first or keep Jia Dyi informed at sales@jiadyi.com, if there’s any more curious, or want to share any of your ideas with us, welcome to contact us as well, we can also provide you suggestion & information that you need.

Jia Dyi